DJI OM 5 Safety Guidelines

Safety at a Glance

Please read this entire document and visit http://www.dji.com/om-5 to view the user manual, other documents, and the tutorial videos with the most current instructions and warnings. Failure to read and follow instructions and warnings may result in personal injury, damage to your DJI OSMO™ product, or other objects in the vicinity. This document and all other collateral documents are subject to change at the sole discretion of DJI OSMO. By using this product, you hereby signify that you have read and agreed to abide by the terms and conditions of this document. You agree that you are solely responsible for your own conduct while using this product and for any consequences thereof. This product is not intended for use by children without direct adult supervision.

⚠️ WARNING

• DO NOT allow the product to come into contact with any kind of liquid. DO NOT leave the product out in the rain or near a source of moisture. DO NOT drop the product into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.
• Put out any product fire using water, sand, fire blanket, or a dry powder fire extinguisher.
• The product should be used in temperatures from 0° to 40° C (32° to 104° F). Use of the product in environments above 40° C (104° F) can lead to a fire or explosion. Use of the product below 0° C (32° F) can lead to permanent damage.
• Never disassemble or pierce the product in any way or the battery may leak, catch fire, or explode.
• DO NOT drop or strike the product. DO NOT place heavy objects on the product.
• DO NOT heat the product. DO NOT put the product in a microwave oven or in a pressurized container.
• DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product inside of a vehicle on hot days. The ideal storage temperature is 22° C to 28° C (72° to 82° F).
• DO NOT store the product fully discharged for an extended period. Otherwise, it will over discharge, which will lead to permanent damage.
• DO NOT extend the extension rod during charging.

⚠️ CAUTION

• Intricate components inside DJI™ OM 5 may be damaged upon impact and cause the gimbal to be damaged.
• Make sure there is nothing obstructing the gimbal when DJI OM 5 is powered on.
• DJI OM 5 is not water resistant. DO NOT use any liquid cleansers. Only use a soft dry cloth to clean DJI OM 5.
• Keep DJI OM 5 away from sand and dust to safeguard the sensors in the motors.
• DJI OM 5 consists of magnets. Keep it away from magcards, IC cards, pacemakers, hard disks, RAM chips, and other devices to avoid interference.
• Make sure to align the marks on DJI OM 5 and the Magnetic Phone Clamp when attaching. Otherwise, the phone may fall off. The Magnetic Phone Clamp attach to DJI OM 5 via magnets. DO NOT move it too fast or make any sudden movements.
• When the phone is attached to DJI OM 5, the compass feature of the phone may experience interference. In such cases, calibrate the compass according to the prompts in the phone.
• If a mobile phone has near-field communication and wireless charging features, these features may be affected by the phone clamp when it is attached. These features will no longer be affected once the phone clamp is removed.

Specifications

Compliance and Disposal Information

This document also includes important compliance information, including FCC, ISED, KCC, and NCC notices, EU declarations of conformity in multiple languages, and guidelines for environmentally friendly disposal of electrical equipment. For full details, please refer to the original document.