DJI OM Multifunctional Module User Manual

Using this Manual

This document is copyrighted by DJI with all rights reserved. It serves as instructions to operate DJI products and should not be used for other purposes. In case of divergence among different versions, the English version prevails.

Searching for Keywords: Use Ctrl+F (Windows) or Command+F (Mac) in Adobe Acrobat Reader to search for terms like "battery" or "install".

Navigating to a Topic: Refer to the table of contents to find and navigate to specific sections.

Printing this Document: This document supports high-resolution printing.

Video Tutorials

Access tutorial videos demonstrating safe product usage at:

https://www.dji.com/osmo-mobile-7-series/video

QR code for tutorials is available in the original document.

Contents

• Using this Manual (Page 3)
• Product Profile (Page 5)
• Using the Product (Page 6)
  • Installing and Removing (Page 6)
  • Tracking and Shooting (Page 7)
  • Fill Light (Page 11)
  • Connecting to Wireless Microphones (Page 12)
  • Phone Charging (Page 14)
  • Firmware Update (Page 14)
• Indicators (Page 15)
• Specifications (Page 16)

1. Product Profile

A line drawing of the DJI OM Multifunctional Module, showing its compact rectangular shape with a lens on one side and ports/buttons on others.

2. Using the Product

The DJI OM Multifunctional Module is referred to as "Multifunctional Module" throughout this manual.

2.1 Installing and Removing

Diagram showing how to attach the Multifunctional Module to a smartphone mounted on a gimbal. An arrow indicates the module sliding onto the phone clamp, aligning with marks.

Example: Capture photos or videos of yourself.

Diagram showing the module attached to a phone on a gimbal, with an arrow indicating the module being removed from the phone clamp.

Example: Capture photos or videos of others.

• If the indicator does not turn on after installation, check alignment of marks on the gimbal and phone clamp.
• The Multifunctional Module enters sleep mode after five minutes of inactivity, turning off the indicator. Press the trigger on the gimbal to exit sleep mode.

2.2 Tracking and Shooting

The Multifunctional Module enables tracking in system and third-party camera apps without DJI Mimo.

• Supports tracking people only.
• Tracking and shooting features are disabled in DJI Mimo.
• Position the tracking camera of the Multifunctional Module and the phone camera towards the subject for selfies or other shots.

Illustration showing a smartphone in landscape mode attached to a gimbal. The rear camera is clear. A green checkmark indicates correct placement.

Illustration showing a smartphone in landscape mode attached to a gimbal. The rear camera is blocked by the module. A red cross mark indicates incorrect placement.

Note: Avoid blocking the rear camera when shooting in landscape mode.

Diagram showing how to remove the Multifunctional Module. An arrow indicates pressing a release button on the module while sliding it off the phone.

To remove the Multifunctional Module: Press the release button and slide the module off.

Tracking Guidelines:

• For optimal gesture recognition, keep the subject 0.5m to 3m away from the tracking camera.
• During tracking, keep the subject 0.5m to 8m away from the tracking camera.

Tracking Operation:

1. Enable Bluetooth on the phone and connect to the gimbal.
2. Enable tracking: Show the [V gesture] to the camera or press the trigger. The indicator turns solid green.
3. Adjust the composition as needed during tracking.

Tracking Control Methods:

• Method 1: Use the joystick.
• Method 2: Use hand gestures.

Illustration showing a hand making an 'OK' gesture towards the camera. The indicator light turns solid yellow. Text indicates 'ON/OFF' and a single press of the trigger resets composition.

Show the [OK gesture] to the camera to pause tracking. The indicator turns solid yellow. The subject can move within the frame.

Illustration showing the same gesture being made again. The indicator light turns solid green. Text indicates 'ON/OFF' and a double press of the trigger resets composition.

Show the [OK gesture] again to confirm composition. Tracking resumes with a solid green indicator. Press the trigger twice to restore default composition for either method.

To stop tracking: Show the [V gesture] or press the trigger again. The indicator turns solid red.

Shooting:

Illustration showing a hand making a 'peace sign' gesture towards the camera. A timer shows '3s'. The indicator light pulses yellow.

Use the [peace sign gesture] to start a countdown for photos or to start/stop recording, whether tracking is enabled or not. The indicator pulses yellow during the countdown.

2.3 Fill Light

Ensure the Multifunctional Module is properly installed.

Illustration showing the module with a button being pressed (×1). An arrow points to a series of lights indicating brightness levels, from OFF to full brightness.

Adjust brightness: Press the button once (×1) to cycle through brightness levels.

Illustration showing the module with a button being pressed (×1). An arrow points to a series of lights indicating color temperature adjustments, from warm (yellow) to cool (blue).

Adjust color temperature: Press the button once (×1) to cycle through color temperature settings.

2.4 Connecting to Wireless Microphones

The Multifunctional Module can connect to two wireless microphone transmitters (referred to as "transmitters").

Supported transmitters: DJI Mic Mini.

Illustration showing the module with a button being pressed (×1). An arrow points to two microphone icons with Bluetooth symbols, indicating connection to two transmitters.

Connection Steps:

1. Connect the Multifunctional Module to the phone.
2. Enable Bluetooth pairing for the Multifunctional Module (indicated by a 2s timer).
3. Power on the transmitter.
4. Enable Bluetooth pairing for the transmitter (indicated by a 2s timer).
5. Once paired, both module and transmitter indicators turn solid green. Recording can begin.

• To prevent cable obstruction, bend the connecting cable as needed.
• For iPhone 14 and earlier models, a USB-C to Lightning cable (sold separately) is required.

Configure wireless microphone settings in DJI Mimo.

2.5 Phone Charging

Ensure the gimbal is sufficiently charged (indicator shows [Yellow] or [Green]).

Illustration showing the module connected to a phone via a cable (labeled '1'). A second connection is shown to the gimbal (labeled '2'), with a button press indicated ('×2 ON/OFF').

Connect the Multifunctional Module to the phone (1) and the gimbal (2). Press the ON/OFF button twice (×2) to initiate charging.

2.6 Firmware Update

Ensure the Multifunctional Module is properly installed.

When updating the gimbal firmware using DJI Mimo, the module firmware updates simultaneously. Please wait for the upgrade to complete.

3. Indicators

Front view of the DJI OM Multifunctional Module with numbered labels: 1. Camera Status Indicator.

Side view of the DJI OM Multifunctional Module with numbered labels: 1. Camera Status Indicator, 2. Wireless Microphone Status Indicator.

Camera Status Indicator

Wireless Microphone Status Indicator

4. Specifications

Visit https://www.dji.com/osmo-mobile-7-series/specs for more information.