DJI OM 4 Quick Start Guide

Getting Started

Welcome to the DJI OM 4 Quick Start Guide. This guide will help you set up and start using your DJI OM 4.

To control the camera, you will need the DJI Mimo app. Download it from the App Store or Google Play.

[Diagram: Shows phone with DJI Mimo app icon, download buttons for iOS and Android.]

Attaching Your Smartphone

Follow these steps to attach your smartphone to the DJI OM 4 using the magnetic ring holder.

Step 1: Apply the magnetic ring holder to the back of your smartphone. Use the alignment guide to ensure it is centered.

[Diagram: Shows applying the magnetic ring to the back of a phone, with an alignment guide.]

Step 2: Wait for 12 hours ⏰ for the adhesive to set properly.

[Diagram: Shows a phone with the magnetic ring attached, with a 12-hour timer icon and a checkmark ✔️.]

Note: Do not attach the magnetic ring holder to a phone case.

[Diagram: Shows a phone case with a magnetic ring holder attached, marked with a cross ❌.]

Operation

Use the onboard buttons to control DJI OM 4. Note that DJI Mimo is required to control the camera.

M Button

When Powered Off:

• Press once: Check battery level.
• Press and hold: Power on.

When Powered On:

• Press once: Switch between photo and video mode.
• Press twice: Switch between landscape and portrait mode.
• Press and hold until it beeps once (?): Enter or exit standby mode.
• Press and hold until it beeps twice (??): Power off.

Joystick

[Diagram: Shows a joystick ?️.]

• Move the joystick up and down to control the tilt axis.
• Move the joystick left and right to control the pan axis.

Shutter Button

[Diagram: Shows a shutter button ?.]

• Press once: Take a photo or start or stop recording.
• Press and hold: Burst shooting (when in photo mode).

Zoom Slider

[Diagram: Shows a zoom slider ↔️.]

• Push up or down to zoom in or out.

Trigger

[Diagram: Shows a trigger button ⚡.]

• Press and hold: Enter lock mode. Release to exit lock mode.
• Press once: Start or stop ActiveTrack.
• Press twice: Recenter the gimbal.
• Press three times: Switch between front and back cameras.
• Press once, and then press and hold: Enter Sport mode. Release to exit Sport mode.