MiBoxer FUT089-B RGB+CCT Full Touch Remote

This document provides instructions for the MiBoxer 8-Zone RGB+CCT Full Touch Remote, Model No. FUT089.

1. Features

This product utilizes the world-wide used 2.4GHz frequency with GFSK control method. It offers low power consumption, long-distance transmission, strong anti-interference, and a fast communication rate. It can control specified Mi-Light / MiBoxer smart lights, allowing adjustments to color, color temperature, saturation, and brightness.

2. Products Key Diagram

Color Ring: Touch the color ring to change colors. Under white light mode, it adjusts color temperature; under color light mode, it changes color saturation.

Dimming Slider: Slide the brightness slider to adjust the brightness.

Indicator light: Shows the status of the remote.

White Button (W): Press to get white light.

ON Button: Touch to turn on the linked device.

OFF Button: Touch to turn off the linked device.

Mode Button (M): Dynamic mode switching button.

Speed + Button (S+): Accelerate the dynamic mode speed.

Speed - Button (S-): Lower the dynamic mode speed.

Zone ON / Link (Unlink) Button: For zone control and linking/unlinking devices.

Zone OFF Button: For zone control.

Dimensions: 153mm (Length) x 47mm (Width) x 19mm (Height)

3. Linking Code / Unlinking Code Instructions

Remark: The light can be working after linking with the remote.

Linking Code Instructions

Switch off the light, wait 10 seconds, then switch it on again.
Short press the 'Link / Unlink' button 3 times within 3 seconds when the light is on.
The lights will blink 3 times slowly, indicating successful linking.

Note: If linking fails (light does not blink slowly), please follow the steps again. A light that has already been linked cannot be linked again.

Unlinking Code Instructions

Switch off the light, wait 10 seconds, then switch it on again.
Short press the 'Link / Unlink' button 5 times within 3 seconds when the light is on.
The lights will blink 10 times quickly, indicating successful unlinking.

Note: If unlinking fails (light does not blink quickly), please follow the steps again. Lights that have not been linked do not need to be unlinked.

4. Grouping of several lights

You can add an endless number of lights to a zone on the 8-channel remote by linking them to different zones. This allows for flexible creation of different group combinations. Below are some grouping examples:

Diagram showing three different grouping examples of lights linked to zones on the remote.

Remark:

Users can reprogram as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by a maximum of four remotes.
Please check the battery installation and controller (fully discharge the power) when programming after switching off and switching on.

5. Attention

This remote only controls specified Mi-Light / MiBoxer products; not all Mi-Light / MiBoxer series are compatible with this remote.
If the indicator light on the device blinks quickly during use, please change the battery promptly. Avoid using poor quality batteries, as they may leak and damage the remote.
This 2.4GHz remote is a precise electronic product. Do not use it in humid, high-temperature, dusty, or high-voltage environments. Store it in a dry, indoor environment free from static electricity.
Avoid using the remote near large metal objects or areas with strong electromagnetic waves, as this can negatively affect the controlling distance.

Certifications: CE, UK, CA, RoHS

Made in China

	MiBoxer FUT089 8-Zone RGB+CCT Remote Controller Manual User manual and technical specifications for the MiBoxer FUT089 8-Zone RGB+CCT Remote Controller, detailing product features, technical parameters, and linking/unlinking instructions.
	MiBoxer 3-in-1 LED Strip Controller: User Manual, Features, and Setup Guide Detailed instruction manual for the MiBoxer 3-in-1 LED Strip Controller. Covers product features, setup modes, 2.4G RF remote control instructions, smartphone app integration (Tuya Smart), voice control with Alexa and Google Home, and DMX512 compatibility. Includes troubleshooting and attention points.
	MiBoxer B8 8-Zone Panel Remote (RGB+CCT) User Manual Comprehensive guide for the MiBoxer B8 8-Zone Panel Remote, detailing its features, parameters, installation, and operation for RGB+CCT smart LED lighting systems.
	MiBoxer FUT088 RGB+CCT Full Touch Remote Control User Manual Comprehensive guide to the MiBoxer FUT088 RGB+CCT Full Touch Remote, covering features, operation, linking, unlinking, and important attention points for Mi-Light and MiBoxer smart lighting systems.
	MiBoxer B8 8-Zone Smart Panel Remote Controller User Guide Comprehensive guide for the MiBoxer B8 8-Zone Smart Panel Remote Controller, detailing features, parameters, functions, and installation/linking instructions for Mi-Light smart lighting systems.
	MiBoxer 3-in-1 LED Controller (Zigbee 3.0 + 2.4G) Instruction Manual Comprehensive instruction manual for the MiBoxer 3-in-1 LED Controller, detailing setup, operation, and integration with Zigbee 3.0, 2.4G RF, Tuya Smart App, Philips Hue, Amazon Alexa, and Google Home. Includes features, remote control instructions, DMX512 compatibility, and important precautions.
	MIBOXER 5 in 1 LED Controller (WiFi + 2.4G) Instruction Manual This manual provides instructions for the MIBOXER 5 in 1 LED Controller, featuring WiFi, Bluetooth, and 2.4G wireless control. It details product features, setup, remote control pairing, app integration with Tuya Smart, voice control via Alexa and Google Home, DMX512 compatibility, and LED strip connection diagrams. Learn to manage lighting color, temperature, brightness, dynamic modes, and advanced features like 'Do Not Disturb' mode.
	MiBoxer FUT088 RGB+CCT Full Touch Remote User Guide Instructions and features for the MiBoxer FUT088 RGB+CCT Full Touch Remote, including linking, unlinking, and operational details.