TORNVIKEN Kitchen Island Assembly Instructions
Brand: IKEA
Product Name: TORNVIKEN
Product Number: 806.176.02
Important Safety Information
⚠️ WARNING: Furniture tipover can cause serious or fatal injury.
- Always install the provided anti-tip device.
- Never place a TV on this product.
- Never allow children to stand, climb, or hang on drawers, doors, or shelves.
- Never open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.
Screws and plugs for the wall are not included. Assess wall suitability for the generated forces. Use screws and plugs suitable for your walls and the intended load. Seek professional advice if uncertain. Read and follow each step carefully.
Tools Required
Phillips head screwdriver (cross-head) ?️, Flat head screwdriver (slot-head) ?️.
Note: Do not assemble on soft surfaces like carpet, as this can damage the product or lead to incorrect assembly. If unsure about assembly, contact IKEA customer support.
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 118331 | Screw | 18x |
| 100211 | Screw | 4x |
| 102377 | Screw | 4x |
| 101345 | Wooden Dowel | 28x |
| 102720 | Wall Attachment Bracket | 6x |
| 101348 | Dowel | 1x |
| 119256 | Drawer Runner Bracket | 4x |
| 109594 | Drawer Runner Component | 18x |
| 100823 | Screw | 10x |
| 119976 | Screw | 12x |
| 190856 | Drawer Knob | 2x |
| 147295 | Drawer Runner (Cabinet) | 1x |
| 147298 | Drawer Runner (Cabinet) | 1x |
| 128535 | Drawer Runner (Drawer) | 2x |
| 126888 | Drawer Runner (Drawer) | 2x |
| 103430 | Cam Lock | 18x |
| 107091 | Cam Lock | 1x |
Assembly Steps
Step 1: Insert 4x wooden dowels (101345) into the holes on one side panel.
Visual: A side panel with dowels being inserted.
Step 2: Attach the bottom panel to the side panel, aligning with the dowels.
Visual: Bottom panel connecting to the side panel.
Step 3: Secure the bottom panel to the side panel with 3x screws (118331).
Visual: Screws being driven into the connection.
Step 4: Attach the second side panel to the bottom panel, aligning dowels.
Visual: Second side panel being attached.
Step 5: Secure the second side panel using 3x cam locks (103430) and their corresponding screws.
Visual: Cam locks being inserted and turned.
Step 6: Attach the top panel to the side panels using 5x screws (118331).
Visual: Top panel being attached to the assembled sides.
Step 7: Insert the middle shelf into the frame, aligning with pre-drilled holes.
Visual: Middle shelf being placed into the frame.
Step 8: Secure the middle shelf using 2x cam locks (103430).
Visual: Cam locks securing the middle shelf.
Step 9: Attach drawer runner components (e.g., 119256 brackets) to the side panels and back supports using dowels (101345) and screws (100823, 119976).
Visual: Drawer runner parts being attached to the main unit's interior.
Step 10: Assemble the drawer box: Attach drawer sides to the drawer base using screws (100211) and cam locks (103430).
Visual: Drawer sides and base being assembled.
Step 11: Attach drawer runner components (128535, 126888) to the drawer sides using screws (119976).
Visual: Drawer runner parts attached to the drawer box.
Step 12: Attach the drawer knob (190856) to the drawer front using screw (119976).
Visual: Drawer knob being attached.
Step 13: Insert the assembled drawer into the main unit by aligning the runners.
Visual: Drawer sliding into the cabinet.
Step 14: Attach adjustable feet (144260) to the bottom of the unit.
Visual: Feet being screwed into the base.
Step 15: Secure the unit to the wall using the provided wall attachment brackets (102720) and appropriate wall fixings (screws/plugs not included).
Visual: Wall bracket attached to the unit and wall.
Step 16: Final checks and adjustments.
