SONGESAND Wardrobe Assembly Instructions

Important Safety Information

⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

(Note: The original document also contains this warning in Hebrew.)

Tools Required for Assembly

• Screwdriver (Phillips head)
• Screwdriver (Flathead)
• Pencil
• Drill with drill bits (Ø 5/16" / 8 mm and Ø 1/8" / 3 mm)

Assembly Steps

Step 1-2: Frame Base and Sides

Connect the base panel and side panels. Insert dowels (e.g., 22x 118331, 20x 112996) into designated holes. Secure panels using screws (e.g., 10x 100214, 20x 101345) and cam locks (e.g., 20x 119250, 20x 119252).

Step 3-4: Continue Frame Assembly

Continue assembling the frame by inserting cam lock screws and tightening cam locks to connect panels.

Step 5-7: Attach Support Rails

Attach horizontal support rails to the frame using screws (e.g., 2x 101345, 2x 105248).

Step 8-12: Build Main Wardrobe Box

Assemble the main wardrobe structure by connecting side panels, base, and top panels using dowels, screws, and cam locks.

Step 13-15: Add Internal Dividers

Insert internal support pieces and dividers using screws (e.g., 3x 100214) and other fasteners.

Step 16-17: Attach Back Panel Supports

Attach supports or slide back panels into grooves.

Step 18-19: Reinforce Frame

Continue reinforcing the wardrobe frame with additional screws and connectors.

Step 20-21: Install Drawer Runners/Shelf Supports

Attach drawer runners or shelf support fittings to the inside of the wardrobe frame using fasteners (e.g., 7x 119250).

Step 22-23: Attach Fittings

Attach fittings such as handles to drawer fronts or doors using screws (e.g., 6x 158568, 6x 118331).

Step 24-25: Complete Main Frame

Finalize the main wardrobe box structure by securing all panels with screws (e.g., 4x 101345).

Step 26-27: Install Internal Components

Install additional internal fittings, such as shelf supports or drawer mechanisms, using fasteners like cam locks (e.g., 6x 119250) and screws (e.g., 5x 100214).

Step 28-29: Attach Wall Mounting Brackets

Attach the wall mounting brackets to the top of the wardrobe using screws (e.g., 2x 100823, 2x 109049).

Step 30-31: Secure Back Panels

Slide the back panels into the designated grooves and secure them.

Step 32-33: Reinforce Structure

Use plastic clips or fasteners (e.g., 12x 10093081, 20x 10093082) to secure the back panels and reinforce the structure.

Step 34-37: Attach and Adjust Doors

Attach hinges to the doors and the wardrobe frame. Adjust hinges for proper door alignment and closing.

Step 38-42: Final Wall Mounting

Secure the wardrobe to the wall using the previously attached brackets. Ensure the furniture is stable and properly anchored. Use screws (e.g., 2x 105248) for attachment.

Step 43-45: Attach Handles to Doors

Attach handles (e.g., 3x 157426) to the wardrobe doors using screws (e.g., 3x 109221, 7x 105248).

Step 46-49: Hang Doors

Mount the doors onto the wardrobe frame by attaching them to the hinges. Adjust doors for alignment.

Step 50-51: Final Adjustments

Make final adjustments to doors and shelves for optimal function and appearance.