Phanteks Glacier One D30X2 Installation Guide

Scope of Delivery

The package includes:

• GLACIER ONE D30X2 Pump
• D30 Fan (x3)
• Radiator (x1)

Mounting Hardware

Components for mounting:

• AM4 AM5 Standoff (x4)
• Radiator Screws 6 mm 6-32 UNC (x12)
• Intel 1700 1851 Standoff (x4)
• Intel 115X 1200 Standoff (x4)
• Radiator Screws 36 mm 6-32 UNC (x12)
• Thumb Nuts (x4)
• Intel 115X 1200 1700 1851 Backplate (x1)
• AMD AM4 AM5 Bracket (x1)
• Intel Bracket (Pre-installed) (x1)

Accessories

Additional accessories:

• Corner Clip Connector (x1)
• Bridge Clip Connector (x2)
• Corner Clip (x3)
• Screw Cover Corners (Left/Right) (x2 each)
• Screw Cover Bridge (x4)
• Tube Clips (x3)
• LINQ6 Mainboard Adapter (x1)

1. Prepare Mainboard

For Intel 115X | 1200 | 1700 | 1851:

1. Install the correct standoffs for your socket type (115X/1200 or 1700/1851).
2. Attach the Intel bracket.

For AMD AM4 | AM5:

1. Remove the original AMD bracket and screws.
2. Install the AM4 AM5 standoffs.
3. Attach the AM4 AM5 bracket.

ATTENTION: Check the stand-off texture to ensure you have the correct socket standoff.

2. Connect D30 Fans

Connect the D30 fans using the provided clips:

• Install Corner Clip Connector (x1)
• Install Bridge Clip Connector (x2)
• Install Bridge Clip (x2)
• Install Corner Clip (x3)

3. Installing CPU Block

Secure the CPU block using the thumb nuts (x4).

4. Connect Pump Module

Connect the pump cables to the Mainboard Pump Header and the NexLinq Hub Mainboard Adapter. Ensure proper connection for 3 or 4-PIN headers.

5. Mount the Radiator and Fans

Mount the radiator and fans to your case using the radiator screws. Options A, B, C, and D illustrate different mounting configurations.

• Use Radiator Screws (36 mm | 6-32 UNC) (x12) for most configurations.
• Use Radiator Screws (6 mm | 6-32 UNC) (x12) as needed.

6. Install Tube Clips

Install the tube clips (x3) to secure the tubing.

7. Install Screw Covers

Install the screw covers (Corner and Bridge types) to conceal the mounting screws.

8. Connect Cables

Connect the D30 fans and pump to the motherboard:

• D30 Corner Connector: Connects D30 fans.
• LINQ6 Adapter: Connects to the Mainboard D-RGB and 4-PIN PWM Fan Header. Daisy-chain D-RGB products as needed.

AIRFLOW DIRECTION: Ensure fans are oriented for proper airflow (D30 Regular Airflow shown).

Support & Warranty

Phanteks offers global customer support. Contact information for Americas and International support is provided, along with links for spare parts and optional upgrades. The product comes with a 5-year warranty.

Safety Information

Follow these guidelines for maximum safety:

• Place the product on a clean, stable surface with adequate ventilation.
• Keep away from water, moisture, heat sources, and open flames.
• Exercise caution when operating the PC to avoid electrical shock. Ensure hands are dry, keep liquids away, and take precautions during thunderstorms.
• Plan cable routing carefully to prevent cables from being trod on or pinched.
• Handle glass components with care.
• When unplugging devices, pull the plug or connector, not the cord.
• Do not place heavy items on the product.
• Ensure the PC is powered off and unplugged before installing or uninstalling components.

NOTE ON DISPOSAL: The WEEE symbol indicates that this product should not be disposed of with household waste. Contact your local municipality for proper disposal instructions.