Phanteks XT Pro & XT Pro Ultra PC Case Installation Guide
Models: PH-XT523P1_BK01, PH-XT523P1_DBK01, PH-XT523P1_DWT01, XT Pro, XT Pro Ultra
Important Information
Disclaimer: Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.
Scope of Delivery
- SSD + Mainboard Screw x30
- Mainboard Stand-off x1
- Power Supply Screw x4
- HDD Screw x8
- 30mm Fan Screw x12
- Ziptie x30
- Stand-off Removal Tool x1
- XT Pro M25-120 Fan Black x1
- XT Pro Ultra M25-140 D-RGB Fan x4
- XT Pro | XT Pro Ultra x1
Installation Guide
Panel Removal
- 01 LEFT SIDE PANEL: Left side panel removal.
- 02 RIGHT SIDE PANEL: Right side panel removal.
- 03 FRONT PANEL: Front panel removal.
- 04 TOP DUST FILTER: Top dust filter removal.
Note: Captive screws are used for panel removal.
Fans Installation
Support up to 10x 120 mm fans or 6x 140 mm fans.
- 120mm FANS: Requires 4x Fan Screws per fan.
- 140mm FANS: Requires 4x Fan Screws per fan.
Hardware Installation
- 01 MAINBOARD: Install using 9x Mainboard Screws.
- 02 POWER SUPPLY: Install using 4x Power Supply Screws.
- 03 STORAGE BRACKET:
- 1A TOP 3.5" HDD: Mount using 4x HDD Screws.
- 1B TOP DUAL 2.5" SSD: Mount using 4x SSD Screws.
- 1C TOP SINGLE 2.5" SSD: Mount using 4x SSD Screws.
- 2 BOTTOM 3.5" HDD: Mount using 4x HDD Screws.
Cables
Connect the following front panel I/O cables:
- HD Audio ?
- USB 3.0 ?
- USB 3.2 TYPE C ? (Only available with the XT Pro Ultra)
- Reset Button ?
- Power Button ?
D-RGB Cables (XT Pro Ultra only)
Connect the mainboard adapter for included M25-140 D-RGB effects. Expand with more D-RGB products and sync lighting to the mainboard.
Connect to Mainboard Header.
Optional Upgrade
Gen4 Vertical GPU bracket: PH-PGPUKT4.0 or PH-VGPUKT4.0_03
Clearances and Component Support
| Component | Maximum Size |
|---|---|
| CPU Cooler Height | 184 mm |
| GPU Length | 415 mm |
| GPU Width | 184 mm |
| Power Supply Length | 270 mm |
Radiator Support
| Radiator Size | Dimensions | Location |
|---|---|---|
| 360mm | 415 x 138 x 60 mm | Top |
| 120mm | 132 x 170 mm | Rear |
Fan Placement and Support
Total fan support: Up to 10x 120 mm or 6x 140 mm fans.
- Top: 3x 120mm fans ?️
- Front: 3x 120mm fans ?️
- Midplate: 3x 140mm fans ?️ (Note: This may refer to mounting points or specific configurations. Refer to overall fan support for total capacity.)
- Rear: 1x 120mm or 1x 140mm fan ?️
Safety Information
To achieve maximum safety, Phanteks suggests adopting the following guidelines:
- Place the product on a clean and stable surface that allows adequate air ventilation.
- Do not use or place the product and any of its components near water, moisture, or other wet surfaces; or place the product near any heat, open flame, or other hot surfaces such as radiators, stoves, fireplaces, and candles.
- Use caution when operating the desktop PC to avoid electrical shock or damage, such as unplugging the power supply during thunderstorms, ensuring that your hands are dry before using (and handling) the desktop PC, keeping it away from any source of liquid and/or heat source, and using all other reasonable precautions needed under the circumstances.
- When connecting external devices to your desktop PC, carefully plan how the wires will be placed. Protect any connected cables from being trod on or pinched, particularly at plugs, convenience receptacles, or the point where they exit from.
- Take extra caution when handling/removing/reattaching glass components. Once removed, place the glass component on a stable surface first before proceeding.
- When unplugging any connected devices and/or cables, always pull the cable or device's plug or connector. Do not forcefully tug on its cord.
- Do not place any heavy items on top of the product.
- Make sure that the desktop PC is off, unplugged from the outlet, and that all connected devices are powered off and unplugged (if any) before installing or uninstalling any internal component to and/or from the desktop PC or product.
WEEE Disposal: The WEEE symbol ♻️ indicates that this product must not be disposed of with normal household waste. Through the correct disposal of this product, you will help protect the environment. For more information on the disposal of this product, please contact your local municipality, your waste disposal service, or the shop where you purchased the product.
Contact Information
Phanteks Taiwan Inc.
11F., No. 150, Jian 1st Rd., Zhonghe Dist. New Taipei City 235
Importer EU: Axpertec Int. B.V.
Sydneystraat 33 3047 BP Rotterdam The Netherlands
Importer US: Axpertec Inc.
20465 E Walnut Dr. N City of Industry, CA 91789 USA
Visit us online: www.phanteks.com
Phanteks
