Phanteks XT Pro Ultra Installation Guide
Model Series: XT Pro, XT Pro Ultra, XT Pro Silence
Product Type: PC Case Accessory
Brand: Phanteks
Scope of Delivery
- SSD + Mainboard Screw x30
- Mainboard Standoff x1
- Power Supply Screw x4
- HDD Screw x8
- 30mm Fan Screw x12
- Zip Tie x30
- Standoff Removal Tool x1
- XT Pro: M25-120 x1
- XT Pro Ultra: M25-140 x4
- XT Pro Silence: M25G2-120 x3
- XT Pro* / XT Pro Ultra*: x1 (Specific component, likely related to optional upgrades or specific configurations)
*Depending on chosen model
Safety Information
To achieve maximum safety, follow these guidelines:
- Place the product on a clean, stable surface with adequate air ventilation.
- Do not use or place the product or its components near water, moisture, or other wet surfaces. Avoid placing near heat sources, open flames, or hot surfaces like radiators, stoves, fireplaces, and candles.
- Exercise caution when operating the desktop PC to avoid electrical shock or damage. This includes unplugging the power supply during thunderstorms, ensuring hands are dry before use, keeping the PC away from liquids and heat sources, and taking all other reasonable precautions.
- When connecting external devices, carefully plan cable placement. Protect cables from being trod on or pinched, especially at plugs, receptacles, or exit points.
- Take extra caution when handling/removing/reattaching glass components. Place removed glass on a stable surface before proceeding.
- When unplugging devices or cables, always pull the plug or connector, not the cord.
- Do not place heavy items on top of the product.
- Ensure the desktop PC is off, unplugged, and all connected devices are powered off and unplugged before installing or uninstalling any internal component.
The WEEE symbol [disposal symbol] indicates that this product must not be disposed of with normal household waste. Proper disposal helps protect the environment. Contact your local municipality, waste disposal service, or retailer for disposal information.
Model Information
This manual is for the following models:
- PH-XT523P1_BK01: XT Pro, Satin Black
- PH-XT523P1_DBK01: XT Pro Ultra, D-RGB Satin Black
- PH-XT523P1_DWT01: XT Pro Ultra, Matte White
- PH-XT523PSC_BK01: XT Pro Silence, Satin Black
Legenda (Symbols)
- Remove: [Remove symbol/text]
- Install: [Install symbol/text]
- Loosen: [Loosen symbol/text]
Disclaimer
Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.
Installation Guide
Panel Removal
01 Left Side Panel
Instructions for removing the left side panel.
02 Right Side Panel
Instructions for removing the right side panel.
Hardware Installation
01 Mainboard Installation
Install the mainboard using 9x Mainboard Screws.
02 Power Supply Installation
Install the power supply using 4x Power Supply Screws.
03 Front Panel Installation
Install the front panel using 2x Captive Screws. (Note: XT Silence models may not require front panel removal).
04 Top Dust Filter Installation
Instructions for installing the top dust filter.
Storage Bracket Installation
Supports various storage configurations:
- 1A Top 3.5" HDD: For one 3.5-inch hard drive at the top.
- 1B Top Dual 2.5" SSD: For two 2.5-inch SSDs at the top.
- 1C Top Single 2.5" SSD: For one 2.5-inch SSD at the top.
- Bottom 3.5" HDD: For one 3.5-inch hard drive at the bottom.
Requires appropriate screws (e.g., 4x HDD Screw, 4x SSD Screw).
Fans Installation
Supports various fan sizes:
- 120mm Fans: Can be installed in multiple locations (Top, Front, Midplate, Rear).
- 140mm Fans: Can be installed in multiple locations (Top, Midplate, Rear).
Note: XT Silence front fan placement is not recommended due to sound panels.
Requires Fan Screws for mounting.
Clearance Specifications
Maximum component sizes supported:
| Component | Top | Front | Midplate | Rear |
|---|---|---|---|---|
| Fans (120mm) | 3x | 3x* | 3x | 1x |
| Fans (140mm) | 2x | 3x* | - | 1x |
| Radiator (120mm) | max. 360 | - | - | 120 |
| Radiator (140mm) | max. 240 | - | - | - |
*XT Silence front fans not recommended due to sound panels.
Other Clearances
- CPU Cooler Height: 184 mm
- GPU Length: 415 mm
- GPU Width: 184 mm
- Power Supply Length: 270 mm
- 360 Radiator: 415 x 138 x 60 mm (Top)
- 120 Radiator: 132 x 170 mm (Rear)
Front I/O Ports
- 1: USB 3.0 (XT Pro) / USB-C 3.0 (XT Pro Ultra / XT Pro Silence)
- 2: USB-C 3.2 GEN 2 (XT Pro Ultra / XT Pro Silence)
- 3: Audio | Microphone
- 4: Reset Button
- 5: Power Button
Optional Upgrades & Features
- Optional Upgrade: Gen4 Vertical GPU bracket (PH-PGPUKT4.0 or PH-VGPUKT4.0_03)
- D-RGB Cables: Connect mainboard adapter for included M25-140 D-RGB effects (XT Pro Ultra only). Expand with more D-RGB products and sync lighting to the mainboard via the Mainboard Header.
Phanteks
