SONOFF TX IW100/101 User Manual V1.1
IW100: Wi-Fi Smart Wall Socket US Type
IW101: Wi-Fi Smart Wall Switch US Type
Use Instructions
1. Power off
Turn off the power supply before installation or repair. A warning symbol [⚠️] indicates that to avoid electric shocks, consult a qualified professional for help when installing and repairing.
Diagram Description: A representation of a breaker box with switches labeled ON and OFF. Hands are shown flipping switches to the OFF position.
2. Wiring instruction
IW100
Diagram Description: The IW100 device terminals are shown. 120V AC input is connected to L (Live) and N (Neutral) terminals. The G (Ground) terminal is also shown. Wires are color-coded: Red for L, Black for N, and Green for G.
IW101
Diagram Description: The IW101 device terminals are shown. 120V AC input is connected to L In (Live In) and N (Neutral) terminals. The L Out (Live Out) terminal is for connecting the load.
Ensure correct wiring for live, neutral, and earth wires.
3. Download the APP
Download the eWeLink app. The app is available on the App Store [App Store] and Google Play [Google Play]. QR codes are provided for easy download. The eWeLink app is described as working with everything.
Setup and Operation
4. Power on
After powering on, the device enters quick pairing mode (Touch) during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash. The device will exit this mode if not paired within 3 minutes. To re-enter pairing mode, long press the touch switch for approximately 5 seconds until the Wi-Fi LED indicator flashes in the same pattern (two short, one long) and then release.
5. Add the device
Tap the "+" icon in the eWeLink APP and follow the on-screen prompts to add the device.
Specifications
| Model | IW100TPB/IW101 |
|---|---|
| Input | 120V AC 60Hz |
| Output | 15A |
| Max. power | 1800W |
| Torque | 1.4 N·m |
| Single/Double/Triple Gang (IW101) | Max. 15A incandescent or CFL load. |
| Lamp load (IW101) | Incandescent: 600W/120V CFL: 220W/120V |
| Operating systems | Android 4.1 & iOS 9.0 or higher |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| Material | PC V0 |
| Dimension | 116x70x35mm |
IW101 Specific Notes
A cover plate approved in this report or a listed non-metallic flush cover plate shall be used when installed in the intended manner.
- Strippable insulated conductor length: 8mm
- Wire gauge: 12AWG
- Wire quantity required: 3
- Material: copper
Warning: For control of incandescent or CFL luminaires only.
Warning: To Reduce the Risk of Overheating And Possible Damage To Other Equipment, Do Not Install To Control A Receptacle, A Motor-Operated Appliance, A Fluorescent Lighting Fixture, Or A Transformer-Supplied Appliance.
Product Introduction
IW100
Diagram Description: The IW100 device is shown with labels pointing to:
- Wi-Fi LED indicator
- On/Off LED indicator
- Configuration button
- Manual switch
IW101
Diagram Description: The IW101 device is shown with labels pointing to:
- Configuration button/Manual switch
- Wi-Fi LED indicator
Features
Turn on/off the devices from anywhere, schedule power on/off, and share devices with your family to control.
- ? Remote Control
- ⏰ Timing Schedule
- ? Voice Control
- ? Share Control
- ? Power Monitoring
- ⚡ Over-load Protection
- ? Sync Status
- ? Camera Feature
- ? LAN Control
Factory Reset
Long press the configuration button for about 5 seconds until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release. The device enters quick pairing mode (Touch). The reset is successful.
Note: Please reset the device to factory defaults if you want to use other Wi-Fi networks, then reconnect the network.
Common Problems
Q: Why my device stays "Offline"?
A: The newly added device needs 1-2 minutes to connect Wi-Fi and network. If it stays offline for a long time, please judge these problems by the blue Wi-Fi indicator status:
-
The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi:
- Maybe you have entered a wrong Wi-Fi password.
- Maybe there's too much distance between the switch and your router, or the environment causes interference. Consider getting close to the router. If failed, please add it again.
- The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network.
- Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile data network on your phone to create a Wi-Fi hotspot, then add the device again.
-
Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server.
Ensure a steady enough network. If double flash occurs frequently, it means you are accessing an unsteady network, not a product problem. If the network is normal, try to turn off the power to restart the switch.
Scan the QR code [QR Code] to read the voice control instruction for Amazon Echo and Google Home.
Visit https://www.sonoff.tech/usermanuals to learn the detailed user guide.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
