Important Safety Instructions
- Do not store the microphone under direct sunlight, near heating devices or in a hot, humid or dusty place.
- Do not allow the microphone to get wet.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not subject the microphone to strong impact.
- Do not disassemble, modify or attempt to repair the microphone.
- Clean only with dry cloth.
- When this product is used for a long time, the microphone may become discolored due to ultraviolet light (especially direct sunlight) or wear.
General Introduction
The CU58 is a USB microphone with a cardioid polar pattern. It features a monitor mix control switch, headphone volume control switch, mic gain adjustable switch, and a mic mute knob. These controls make the microphone more practical. It is a plug-and-play USB device, compatible with Windows and MAC computers. A purple LED inside the microphone cage indicates when the microphone has power. Its special mount shock reduces vibration during recording and stage performance.
Introduction of Each Button
The CU58 microphone features several controls:
- 1. MUTE: Press this button to mute the microphone.
- 2. MIC GAIN: Adjusts the microphone's sensitivity.
- 3. MIC/USB: Mixes the microphone signal with the sound from your audio recording software. Turning the knob counter-clockwise increases the microphone signal and decreases the computer/device software signal. Turning it clockwise increases the computer/device software signal and decreases the microphone signal. (It is recommended to keep this knob in the center position for an equal balance of both signals.)
- 4. VOLUME: Adjusts headphone volume.
- 5. Headphone Connector: Standard 3.5mm stereo headphone connector.
The microphone has a purple LED indicator that lights up when powered.
Installation
Attaching the Microphone:
- Switch the clip assembly into the mic stand base.
- Attach the microphone to the mic clip assembly and lock it.
Adjusting the Angle:
- Loosen the safety knob.
- Position the microphone for ideal pickup.
- Lock the safety knob. (Adjustable angle from -90° to +90°).
Preliminary Set Up with WIN10
1. Plug the free end of the USB cable into the USB port on your computer. The microphone's purple LED light will illuminate, indicating the mic is receiving power. Your computer will automatically recognize the USB device and install a driver.
2. Click the Start button, then click Control Panel.
3. Click Hardware and Sound.
4. Click Sound.
5. In the Sound window, select the "Recording" tab. Double-click "Alctron CU58" to select it as the default recording device.
6. To adjust the volume, click the "Levels" tab and adjust the microphone volume using the slider. Click "OK" to save changes.
Preliminary Set Up with MAC
1. Plug the free end of the USB cable into the USB port on your computer. The microphone's purple LED will illuminate, indicating the microphone is receiving power. Your computer will automatically recognize the USB device and install a driver.
2. Open System Preferences.
3. Click Sound to display the Sound preference pane.
4. Click the "Input" tab and select "Alctron CU58-USB" as the device for sound input.
5. Your preferences are now set to use the Alctron CU58-USB with your recording program of choice.
Recording Setting
Using Audacity as an example, the setting method is similar for other recording software:
- After downloading and installing recording software (e.g., Audacity), open it and navigate to "edit" > "preferences" > "recording" settings.
- In the settings window, select your desired audio format (e.g., stereo or mono).
- Click the red record icon to begin recording.
- When starting recording, ensure the sound resource is set to "Alctron" (or the CU58 microphone).
Specifications
- Capsule: 16mm electrets capsule
- Polar pattern: Cardioid
- Frequency response: 20Hz-20kHz
- Sensitivity: 60dB±3dB
- Dynamic range: 96dB
- Max SPL: 110dB
- Sampling rate: 24bits/96k
- Output connection: USB
Contact Information
Copyright © Ningbo Alctron Electronics Technology CO., LTD. All rights reserved. Specifications and appearance subject to change without notice.
Ningbo Alctron Electronics Technology CO., LTD.
No.76 SanCheng Road, XiuFeng Industrial Area, GaoQiao Town, NingBo, China.
Tel: +0086 574 87150672
Fax: +86 574 87157176
E-mail: info@alctron-audio.com
Website: www.alctron-audio.com