V1-PD One-Button RF LED Dimmer

Features

• Use to control monochrome constant voltage LED strips.
• One button for on/off, and brightness adjustment.
• 4096 levels dimming smoothly without any flash.
• Operate with LED indicator light.
• Match with RF 2.4G single zone or multiple dimming remote control.
• Used as RF remote control to output RF 2.4G signal, remote control of other RF LED controllers or RF dimming LED drivers.

Mechanical Structures and Installations

LED output (Connecting the LED strip):

Power input (Connect the power adapter):

LED indicator

Button

Inside diameter 2.1mm (back)

Outside diameter 5.5mm

Diagram showing the V1-PD dimmer with connections for LED strip and power input. The dimmer has a circular button and an LED indicator. Dimensions are provided: 70.00 mm length, 34.50 mm width, and 15.00 mm height.

Button Function

• Short press: Turn on or off light.
• Double click: Switch 10% or 100% brightness.
• Long press (1-6s): Continuous brightness adjustment, dimming range 1-100%.

V1-PD Match RF Remote Controller (Use Power Restart)

Match:

Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.

Delete:

Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

V1-PD Used as RF Remote Controller

The V1-PD can be matched with one or more RF LED controllers/RF dimming drivers to remotely control other fixtures with one-button operation.

For example, two V1-PD controllers are matched with each other for synchronized control. End user can choose the suitable match/delete ways.

Use the controller's Match key

Match:

Short press the controller/power supply's match key, immediately press the button. The LED indicator fast flash a few times means match is successful.

Delete:

Press and hold the controller/power supply's match key 5s, The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:

Switch off the power of the controller, then switch on power, repeat again. Immediately short press the button 3 times. The light blinks 3 times means match is successful.

Delete:

Switch off the power of the controller, then switch on power, repeat again. Immediately short press the button 5 times. The light blinks 5 times means all matched remotes were deleted.