COSTWAY Baby Cribs BB5592 User's Manual

Follow Costway

Visit us: www.costway.com

[Facebook] [Pinterest] [YouTube] [Instagram]

Important Safety Information

This instruction booklet contains IMPORTANT SAFETY INFORMATION. Please read and keep for future reference.

Please give us a chance to make it right and do better!

Contact our friendly customer service department for help first.

Replacements for missing or damaged parts will be shipped ASAP!

Contact Us!

Do NOT return this item. Contact our friendly customer service department for help first.

Email: US: cs.us@costway.com, UK: cs.uk@costway.com

Before You Start

Please read all instructions carefully and keep it for future reference.

General Warnings:

• Attention: To prevent possible injury by entanglement, remove this toy when the child starts trying to get up on its hands and knees in a crawling position.
• Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
• The product must be installed and used under the supervision of an adult.
• Read through each step carefully and follow the proper order.
• Remove all Packaging, separate and count all parts and hardware before Installation.
• Please ensure that all parts are correctly installed, incorrect Installation can lead to a Danger.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Ensure a secure surface during construction, and place the product always on a flat, steady and stable surface.

TO UNFOLD

Step 1: Open the bag and take all the parts out.

Step 2: Unfasten the 3 velcro straps that are around the mattress.

Step 3: Place the playpen in the vertical position and open the touch fasteners to remove the mattress.

Step 4: Grasp the playpen at the short sides and unfold the playpen.

TO UNFOLD (Continued)

Step 5: Draw upward the four side rails separately, starting with the short sides first and lift the middle joint up to completely lock in position. When completely locked in position, you will hear a click sound.

Step 6: Make sure that all 4 sides of the playpen are correctly locked in position, then push down the base pressing the centre.

WARNING! Don't reverse the above steps. It won't be possible to make the 4 rails locked in position if the centre of the base is down.

TO UNFOLD (Continued)

Step 7: Place the mattress in the playpen with the padded side up. Insert the four velcro tabs through the slots in the base of the playpen.

The Usage Of Second Layer

Step 1: Install the Bassinet in the inside of the playpen with all the zippers and then stick on velcro.

NOTE! Ensure zipper is completely attached all the way around before each use.

Step 2: Support tubes into the sleeve provided on the bottom of bassinet and connect them together.

Step 3: Then place the mattress inside the bassinet.

Changing Table Accessories

Step 1: Take out all the accessories of the changing table. Let the two long tubes through the changing table.

Step 2: Let the two short tubes through the changing table as pictured.

Step 3: Connect the short tube and the long tube as pictured. Repeat the same procedure for the other tube ends.

Step 4: Assemble 2 pieces of support plastic onto the corresponding plastics.

Changing Table and Toy Bar Assembly

Step 5: Put the changing table onto the top rails and make it correctly locked in position.

Toy Bar Assembly

Step 6a: Attach two plastic clips to the standing tubes on either side.

Step 6b: Please make sure that the buckle is installed when the baby is lying on the changing table.

Attach the plastic clips to either side of the playpen as shown.

TO FOLD

Step 1: Remove all accessories, take the mattress out of the bassinet. Pull the band in the centre of the base upwards. Then push downward the side rails, do the same for four sides.

Step 2: Draw together all four corners of the playpen. Then insert the second layer inside the playpen and place the other accessories. Fasten the velcro straps that are around the mattress, and then place inside the travel bag.

WARNING! If the top rails do not release, ensure that the base is raised fully and lift the rails slightly before pressing the release button.

WARNING

READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY JEOPARDIZE THE SAFETY OF YOUR CHILD. YOUR CHILD'S SAFETY IS YOUR RESPONSIBILITY. CAUTION! NEVER LEAVE THE CHILD UNATTENDED: IT MAY BE DANGEROUS. PAY UTMOST CARE WHEN USING THE PRODUCT.

• Be aware of risks related to open fire and other sources of strong heat radiation such as electric or gas radiators etc. placed in the vicinity of bed.
• Never use the bed in case any of its parts is broken, torn or lacks; use only components approved by the bed's manufacturer.
• Never leave inside the bed or close to it, things that may help the child to get out of the bed or causing the risk of strangulation, such as curtain or window blind cord etc.
• Do not use the cot without the base.

CAUTION

1. Long-term exposure to direct sunlight may cause fading of fabrics. In such cases, any complaints will not be accepted.
2. The Company reserves itself the right to modify the bed structure without the obligation to inform the customers about it.
3. Customers will be charged for any repairs necessary because of careless use.

Never leave your child unattended! [Child safety warning pictogram]

Information/Safety/Conditions

1. The bed is ready to use only when the locking mechanisms are put in operation - always check before you put your child inside that the security elements are locked.
2. Leaving your child unattended check if there is no possibility to get out of bed, for instance through an open side part.
3. When you use other mattress than the original one, make sure that the gap between mattress and bed is smaller than 30mm and that the mattress thickness leaves a space inside (measured from the upper surface of the mattress to the bed frame edge) at least 200 mm on the upper level.
4. We strongly recommend that all assembly fittings should always be tightened properly and that fittings should be checked regularly and retightened as necessary.
5. In order to prevent injuries stop using the bed if your child is able to climb and get out of the bed.
6. Maximum load of the bed is 15 kg.
7. The product is intended for one child only.
8. Periodically check technical condition of your product.
9. During folding and unfolding protect your fingers.
10. The base should always be used in the lowest position as soon as the baby is old enough to sit up.
11. To use the lowest level of mattress, disassembly the second level with all supports.
12. Always remember to lock the wheels!

Cleaning

1. All plastic parts may be cleaned using wet, soft cloth. Do not use any aggressive cleaning agents.
2. Metal parts shall only be cleaned using dry cloth.
3. Both the upholstery parts and the mattress may be cleaned using wet, soft cloth using mild washing agents. Do not use any aggressive cleaning agents. Do not whirl and tumble dry!

Dry the mattress completely before using or storing it.

Care Symbols:

• [Handwash in cold water]
• [Do not bleach]
• [Do not tumble dry]
• [Do not iron]
• [Do not dry clean]

Welcome to visit our website and purchase our quality products!

Your suggestions and comments for COSTWAY are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click. It would be quite encouraging if you could kindly do so like below:

Example Feedback:

Great products so far

February 24, 2019

Great products so far. Fast delivery, easy setup, and working without any issues.

With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!

US office: Fontana, California

UK office: Ipswich

Benefits of Shopping with Costway:

• Reward Points
• Exclusive Customer Service
• Personalized Recommendations
• Permanent Shopping Cart
• Order History

We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedbacks. THANK YOU!