Costway BB5558 Portable Baby Playpen
General Warnings
Please read all instructions carefully and keep them for future reference.
Attention: To prevent possible injury by entanglement, remove this playpen when the child starts trying to get up on their hands and knees in a crawling position.
Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all packaging, separate and count all parts and hardware before installation.
Please ensure that all parts are correctly installed; incorrect installation can lead to a danger.
We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, and place the product always on a flat, steady, and stable surface.
Manual Instructions
IMPORTANT: Read all instructions BEFORE assembly and USE of product, and KEEP THEM FOR FUTURE USE.
1. WARNINGS
- Never leave the child unattended.
- Do not put the playpen near a fireplace or any other source of heat.
- Upper age / weight limit for children using the playpen: 3 years or 15 kg.
- Do not use the playpen without the bottom being in place.
- Make sure the playpen is completely unfolded and all the locking systems are fully secured before putting your child into it.
2. RECOMMENDATIONS
- Check that all assembly mechanisms are properly secured and regularly monitored.
- To avoid injury, keep children well away when folding or unfolding the playpen.
- Do not leave anything inside the playpen and do not place it alongside anything that the child could climb onto or which could pose a risk of suffocation or strangulation, e.g. strings, curtains, ties, etc.
- Do not move the playpen when the child is in it.
- Do not use if one or more items are broken or missing.
- Use only accessories or spare parts that have been approved by the manufacturer.
- Make sure that your child cannot climb out of the playpen. To avoid the risk of falls, stop using the playpen as soon as the child is able to climb out of it.
LIST OF PARTS
Check that no parts are missing before setting up the playpen.
- A. 1 playpen
- B. 1 carrying bag
- C. 1 foldable mattress
- D. 1 diaper changer
- E. 1 storage unit
- F. 1 Turning toy bar with music box
3. ASSEMBLY INSTRUCTIONS
STEP 1: OPENING OF THE PACK
Open the carrying bag (Fig. 1) and take the playpen out.
Detach the foldable mattress from the playpen by unfastening the self-fasting straps (Fig. 2) to release the playpen.
Fig. 1: Illustration showing the carrying bag being opened.
Fig. 2: Illustration showing the foldable mattress being detached from the playpen via straps.
STEP 2: SECURING THE PLAYPEN
Unfold the structure slightly to push the sides of the playpen apart (Fig. 3).
IMPORTANT: Start by unfolding the playpen by pushing the sides apart. The bottom of the playpen (in the centre) should be lowered last.
Follow the instructions illustrated in Fig. 4a and Fig. 4b on both sides at the same time.
Finish by pressing down on the bottom of the playpen (Fig. 5) to secure the locking mechanism.
Fig. 3: Illustration showing the playpen structure being partially unfolded.
Fig. 4a & 4b: Illustrations showing the sides of the playpen being pushed outwards simultaneously, with a 'CLICK' indicator for locking.
Fig. 5: Illustration showing the center bottom of the playpen being pressed down to lock.
STEP 3: Install the bassinet
Before installing, remove the foldable mattress from the bottom of the playard.
Place the bassinet inside the playard and attach the zipper to the top rails (Fig. 6-1).
Make sure the zipper is securely attached to the top rails.
Insert the metal tube together in the bottom of the playard as shown (Fig. 6-3). MAKE SURE tubes are connected before installing the foldable mattress.
Slip the foldable mattress into the bottom of the bassinet (Fig. 6-4).
Press the buttons on both sides of the playpen, and move the top rail down (Fig. 6-5).
The top rail and the second layer are fixed with a zipper (Fig. 6-6, Fig. 6-7).
Note: The lifting function of the playpen must be operated on both sides of the bed.
Fig. 6-1: Illustration showing the bassinet being placed inside the playard and zipped to the top rails.
Fig. 6-2: Close-up of the zipper attachment.
Fig. 6-3: Illustration showing metal tubes being inserted into the bottom of the playard.
Fig. 6-4: Illustration showing the foldable mattress being placed inside the bassinet.
Fig. 6-5: Illustration showing buttons being pressed on the sides to lower the top rail.
Fig. 6-6 & 6-7: Illustrations showing the zipper mechanism connecting the top rail and second layer.
STEP 4: Diaper changer assembly
Unfold the diaper changer.
Insert the two tubes inside the diaper changer as shown.
Attach the 4 clips on the top short hand rails. Make sure all 4 clips are securely attached to the top short rails.
When you put your baby on the diaper changer, always use the harness to keep your baby safe.
Diagrams illustrating the assembly of the diaper changer, including inserting tubes and attaching clips to the rails. A safety harness is depicted.
Storage assembly
Attach the clips of the storage unit to the top rail.
Illustration showing the storage unit being attached to the top rail via clips.
Turning toy bar with music box assembly
Hang the music box on the bracket hook, then put the bracket onto the short handrail.
Illustration showing the toy bar bracket being attached to the short handrail and the music box hung on it.
4. FOLDING AND STORING THE PRODUCT
STEP 1: FOLDING THE PLAYPEN
Remove the mattress from the playpen (Fig. 10) and lift up the bottom with the help of the fabric pulling strap (Fig. 10-1).
Lift up rims A simultaneously while pressing the unlocking button underneath the rim (Fig. 11).
Lift up rims B simultaneously while pressing the unlocking button underneath the rim (Fig. 12).
Each rim should buckle on both sides, as shown here (Fig. 13 and Fig. 14).
IMPORTANT: If the rims of the playpen do not fold down completely, repeat the procedure shown in Fig. 11 and Fig. 12.
Fig. 10 & 10-1: Illustrations showing the mattress removal and the bottom being lifted via a fabric strap.
Fig. 11: Illustration showing Rim A being lifted while pressing an unlocking button.
Fig. 12: Illustration showing Rim B being lifted while pressing an unlocking button.
Fig. 13 & 14: Diagrams showing the U-shape and V-shape of the folded rims, indicating correct buckling.
STEP 2: STORING THE PLAYPEN
Once the playpen locking mechanisms have been released, fold it up completely and fit the mattress around the structure, securing it with the self-fastening straps (Fig. 15).
Slip the whole thing into the carrying bag (Fig. 16).
Fig. 15: Illustration showing the mattress fitted around the folded playpen and secured with straps.
Fig. 16: Illustration showing the folded playpen being placed into the carrying bag.
MAINTENANCE INSTRUCTIONS
You can extend the life of your playpen by taking good care of it; here is some advice.
- 1 - Never immerse the playpen; just wipe down the different surfaces.
- 2 - Clean with a sponge and soap or a gentle detergent. Air-dry, preferably away from sunlight.
- 3 - Always store this product in a well-aired place.
- 4 - Do not expose to sunlight for long periods of time.
Contact and Support
For assistance, please contact Costway customer service. Replacements for missing or damaged parts will be shipped as quickly as possible.
Visit Costway online at https://www.costway.com.
Your suggestions and comments for Costway are important to us. We encourage you to leave a review on our website.
