VIDEX L201 Battery Charger

1. General Description

The VIDEX L201 charger is designed for multiple uses, charging battery cells. The product complies with European and national requirements for electromagnetic compatibility (EMC).

2. Technical Description

The product is designed for charging lithium-ion batteries. The charger has two independent channels, and the charging current is determined automatically. The device is equipped with LED indicators.

Power Supply Voltage: 5V

Compatible Battery Types: 26650, 22650, 26500, 18650, 18490, 17500, 17335, 16340, 14500, 10440

Number of Batteries Chargeable Simultaneously: 1 or 2

Battery Charging Voltage: 4.2V

Charging Current: 1000 mA

Incorrect Polarity: Indicated by LED

Power Connector: microUSB (5V/1A, 5V/2A)

LED Indicator: Yes

Battery Mounting Mechanism: For batteries of various sizes

Battery Indicator: Yes

3. Completeness

• VIDEX L201 charger
• USB-Micro USB Cable
• User Manual

4. Instructions for Use

4.1 Preparation for Use

Ensure the device casing is free from mechanical or other damage. Do not use the device immediately after a sudden temperature change. To prevent damage caused by condensation, leave the device in the room for 5 hours.

4.2 Battery Placement

Place the required number of batteries for charging in the charger slots. It is permissible to charge one or two batteries of different standards.

4.3 Power Connection

Using the cable supplied with the charger, connect it to a compatible adapter or USB port (5V/2A). The LEDs will indicate they are on by turning green. After installing one or two batteries, the charger will enter charging mode. The color of the LED indicator on the casing will change to red. If batteries are installed without correct polarity, the LED will turn off, indicating the need to install the batteries correctly.

4.4 Battery Charging

The time required to fully charge a battery cell depends on its capacity. The charging current is determined automatically. After the battery is fully charged, the LED indicator will light up green until the battery is removed from the device. After charging, disconnect the charger. Remove the batteries from the charger.

5. Safety Requirements

• Only use compatible and functional batteries. Installing incompatible, faulty, or non-chargeable batteries may cause damage to the device or property. There is a risk of explosion.
• If the casing is damaged or the device is used improperly, there is a risk of electric shock.
• The device should only be used indoors under the suggested conditions. Do not use the device in conditions of excessive humidity.
• Do not disassemble or modify the device.
• Avoid mechanical damage or dropping the device.
• Use of the device by children is permitted only under adult supervision.

6. Maintenance

The product does not require maintenance. It is recommended to periodically clean the charger from dust. The device must be disconnected from any power source during cleaning. Only a dry and soft cloth is allowed for cleaning the charger casing. Do not use abrasive materials or liquids.

7. Transport and Storage

The product should be stored and transported in the manufacturer's packaging. The device should be stored in a clean, dry, ventilated room at a temperature between 0 and 40°C.

8. Disposal

The product does not contain harmful substances. To prevent environmental damage, separate the product from household waste and dispose of it in the safest way, e.g., by handing it over to specialized disposal points. Used batteries should also be disposed of separately. You can return used batteries or accumulators at any collection point in your location.

ALLEGRO OPT SP. Z O.O. is not responsible for property damage resulting from improper use and failure to follow the charger's operating instructions.

9. Warranty Obligations

The warranty period for the charger's operation is 12 months from the date of sale. A defective device can be returned or exchanged, except in the following cases:

• The sales organization's packaging and receipt have not been retained.
• The device is damaged due to use contrary to its intended purpose (inappropriate power cells used, signs of short circuit, etc.).
• The device shows signs of repair or casing opening.
• Violations of operating conditions (in particular, mechanical and thermal damage, cracks or other signs of mechanical impact, deformed contacts, etc.).
• The failure is caused by third-party substances or liquids entering the device.

Warranty Card:

Name:

Article:

Date and Place of Sale:

Date of Exchange / Return:

Seller's Stamp and Signature:

Importer: ALLEGRO OPT SP. Z O.O.

For complaint acceptance, please contact the Importer.

Date of production and batch number are indicated on the product and packaging.

CE