Baby Trend Tour 2-in-1 Stroller Wagon

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration or accident, or with an altered/removed serial number invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.

Customer Service can be contacted at 1 (800) 328-7363, Monday through Friday, between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

(Warranty information is also provided in Spanish and French in the original document.)

Product Overview

Model: WG01XXXB

Product Name: Tour™ 2-in-1 Stroller Wagon

Manufacturer: Baby Trend, Inc.

Address: 13048 Valley Blvd. Fontana CA 92335

Customer Service Phone: 1-800-328-7363

Website: www.babytrend.com

Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE.

Parts Identification

• Canopy with Mosquito Net
• Soft Parent Organizer
• Child Tray
• Front Wheels
• Rear Axle and (2) Wheels
• Wagon Frame
• Car Seat Adapter - fabric cover
• Stroller Board / Ride-On Board Accessory (Sold Separately)

Important Safety Information

⚠️ WARNING: Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference.

⚠️ WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out, always use the safety harness and ensure that the children are properly positioned according to these instructions.

⚠️ WARNING: Never leave children unattended.

⚠️ WARNING: Care must be taken when folding and unfolding the stroller to prevent finger entrapment.

❗ CAUTION: This stroller is designed for up to 2 children only. Use with more than 2 children may cause an unbalanced condition which can injure/harm your child. Children must be at least 6 months old and be able to sit upright unassisted.

❗ CAUTION: Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.

❗ CAUTION: Be certain the stroller is completely opened and locked in place before allowing a child near the stroller.

• Maximum weight in child tray: 5 lbs (2.26 kg).
• Maximum weight in soft parent organizer: 2 lbs (0.90 kg).
• Maximum weight capacity per child: 55 lb (24.94 kg).
• Maximum total weight capacity (with accessories): 110 lbs (49.89 kg). Exceeding the weight limit will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition.

NEVER use the stroller on stairways or escalators.

NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.

NEVER allow your stroller to be used as a toy.

Cleaning: Use only mild household soap or detergent and warm water on a sponge or clean cloth. Rinse and air dry.

Maintenance: Check your stroller regularly for loose screws, worn parts, torn material or stitching. Replace or repair parts as needed. Discontinue use if malfunction or damage occurs.

Assembly Instructions

Frame Setup

1. Release Fold Latch: Release the fold latch. Unfold the stroller frame by pulling the stroller handle upward until it clicks into locked position. The RED indicator on the handle will not be visible when the stroller is fully open. If the RED indicator is visible, check that the open position lock is engaged before continuing.

Front Wheels

2. Install Front Wheels: Insert front wheel axle pin into the wheel hub until the wheel locks firmly into place. Repeat on the other side. Ensure it is securely attached.

Rear Axle and Wheels

3. Attach Rear Axle and Wheels: Position stroller with rear leg tubes facing upward. Place the rear axle with wheels over the rear legs and apply downward pressure on both sides to ensure both sides lock into place.

Soft Parent Organizer

4. Strap In Organizer: Use the hook and loop to hang the soft parent organizer onto the stroller handle. Fasten tightly.

Child Tray

5. Attach Child Tray: Align corresponding slots on the stroller frame and slide down into position until locked. Ensure the child tray is secure before using.

Canopy

6. Install Canopy: Add the canopy frame into the designated slots located on the child tray.

Open Canopy: Use the strap and snap closure to anchor the canopy. Firmly spread out both sides.

Install Mosquito Net: Unzip and pull out the net. Stretch around the top edge of the frame and hook each corner to the circle tabs. Ensure all 4 tabs are secured.

Store Mosquito Net: Lift the elastic end, roll towards canopy, and zip closed.

Remove Canopy: Press the tab on each end and lift the entire canopy.

Remove Child Tray: Push tabs outward and pull out the child tray. The canopy may also be installed without the child tray.

Handle Storage

7. Use Handle: Locate handle underneath frame, press release button to unlatch. Pull bar completely out, rotate up to desired position.

Store Handle: Reverse step, push handle completely in until it clicks. Ensure it rests on storage hooks.

Folding and Unfolding

Folding the Stroller

8. Fold Stroller: Close the canopy. Use the double lock feature: push safety lock up, lift trigger, pull both triggers together. Push down on the stroller handle until completely folded. Ensure the fold latch clicks and secures the stroller. Push handle completely forward for a full compact fold.

Unfolding the Stroller

9. Unfold Stroller: Release the fold latch. Unfold the stroller frame by pulling the stroller handle upward until it clicks into locked position. Check the RED indicator status.

Safety Harness

⚠️ WARNING: Avoid serious injury from falling or sliding out. Always use the safety harness.

STRANGULATION HAZARD: Child can strangle in loose straps. Never leave child in seat when straps are loose or undone.

10. Use Safety Harness: The child tray is not designed to hold the child. Stay near and watch child during use. NEVER leave child unattended.

• Place the crotch strap between your child's legs. Insert Harness Buckles into the Center Clasp.
• Adjust waist straps for comfort and safety. Safety straps should fit snug.

11. Release Safety Belt: Push button on Center Clasp to release buckles.

Brakes

⚠️ WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. NEVER leave stroller unattended on a hill or incline.

12. Engage Brakes: Apply light downward pressure to the brake lever on each rear wheel. May require slight forward or rearward movement to align brake teeth. Check that the stroller will not move and both brakes are properly applied.

Release Brakes: Gently lift up on the brake lever.

Accessories

Car Seat Adapter

Refer to the car seat manual for maximum weight. Ensure adapter is securely attached before use. Tray and/or Canopy CANNOT be used with the adapter.

❗ CAUTION: Avoid serious injury from falling, always use the safety belt to secure car seat to stroller.

13. Install Adapter: Unfold adapter, place on flat surface with straps down. Connect bars. Ensure pins click. Flip adapter with straps upwards. Attach straps/D-rings to side bar. Open clips on adapter, open flaps on wagon cover to expose bar connection. Align clips to bar, press into place. Close clips firmly.

14. Remove Adapter: Wrap thumbs over wagon frame, apply pressure on clip to release from bar.

Infant Car Seat Installation

15. Install Car Seat: Place car seat onto adapter, front facing same direction as buckle. Ensure stoppers rest on adapter bar. Strap safety belts through belt path, connect buckles, tighten straps snugly. Tighten bottom support straps. Safety belt MUST ALWAYS be installed through belt path.

Removal: Release safety strap, reverse step 15, then follow step 14.

Maintenance

Wagon Fabric

16. Detach Fabric: For cleaning or replacement, unzip from front and rear of wagon frame. Remove D-rings straps from fabric, unthread harness straps. Remove screws on underside of frame.

Reattach Fabric: Realign fabric to corresponding frames. Insert D-ring straps through slots. Secure with D-ring. Ensure zippers and hook-and-loop fasteners are attached.

Rear Axle Wheel Removal

17. Remove Rear Wheel: Push rear wheel release; wheel detaches from bushing. For replacement, press pin on each side behind wheel hub, pull axle out.

Adapter Fabric

18. Remove Adapter Fabric: Use hook and loop fasteners on underside of adapter bar to remove fabric.

Reattach Adapter Fabric: Wrap panels over bar and attach with hook and loop.

Care and Maintenance

• Cleaning Seat Pad: Spot clean only. Surface wash small spots with mild solution of soap and water. Rinse with water to remove soap solution. Wipe or air dry.
• Cleaning Stroller: Surface wash stroller frame, plastic parts and fabric with mild solution of soap and water. Wipe surfaces with water to remove soap solution. Wipe or air dry.
• Regular Checks: Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis. Replace or repair parts as needed.

Customer Service

Contact Baby Trend Customer Service at 1 (800) 328-7363, Monday through Friday, between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required.