T236 Instruction Manual
Brand: 4Modern Home
Important Information & Assembly Preparation
To better protect the lampshade from damage during transportation, it arrives rolled. You may notice wrinkles or creases on the edges when you first put it up. Do not be alarmed; this is not a permanent issue or defect. Be prepared for the possibility that it may take several days or weeks for the lampshade to regain its natural shape.
First, assemble the shade by attaching the sides together using Velcro. Align the frame with the lampshade and secure it in place using fasteners. Repeat the process for the second frame. Ensure that the frames are firmly attached and the lampshade is tightly stretched.
Assembly Instructions
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
- Unpack all parts from cartons carefully.
- During assembly, ensure the power cord is prevented from twisting.
- Stuff the cord into the lamp socket (B), then tighten the lamp socket (B) into the body (A) until tight.
- Place the harp (D) onto the saddle (C).
- Place the shade (E) onto the harp (D).
- Tighten the Finial (F) into the harp (D) until tight.
Note: For an installation video, please scan the QR code provided in the original document.
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
Important Warnings & Customer Support
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Dear Customer:
Thank you for choosing 4ModernHome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase.
Best regards,
[4Modernhome/Support Team]
