Welcome
Dear Customer:
Thank you for choosing 4modernhome! We appreciate your business. Should you have any questions or encounter any issues, please don't hesitate to contact us. You can reach us via email at support@4modernhome.com or by calling 469-312-6428. Our team is dedicated to ensuring your complete satisfaction with your purchase. We value your feedback, as it helps future customers in making informed decisions. We encourage you to share your experience by leaving a brief product review on the platform where you made the purchase. Once again, thank you for choosing 4modernhome!
Best regards,
[4Modernhome/Support Team]
Specifications
Applicable bulb type: A19, A60, T45, ST58... (Excluding bulb)
Safety Information
CAUTION: Risk of fire [fire-risk-icon]
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
Warnings
If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
California Residents Proposition 65: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution
It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Tube | 3 |
| B | Lamp socket | 1 |
| C | Shade | 1 |
| C2 | Shade frame | 1 |
Assembly Instructions
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the tubes (A) into the lamp socket (B) until tight. [Diagram shows three tubes being screwed into a central lamp socket.]
- Pull the lamp shade frame (C2) apart on both sides. [Diagram shows a circular shade frame being expanded or opened.]
- Install the shade frame (C2) onto the shade (C) as shown in the images. Pay attention to the direction of decorative elements (e.g., feathers) when installing. [Diagram shows the shade frame being attached to the fabric or material of the shade, with arrows indicating alignment and a close-up on the orientation of decorative fringe.]
- Place the assembled shade (C) onto the lamp socket (B). [Diagram shows the complete shade assembly being lowered onto the lamp base, connecting to the socket.]
