T177 Lamp Instruction Manual
Model: T177
Assembly & Installation Instructions
Thank you for choosing this product. For any questions or issues, please contact support@4modernhome.com or call 469-312-6428. Your feedback is appreciated.
Important Safety Information
CAUTION: Risk of fire. Read all instructions carefully before installation. Ensure power is turned off at the main breaker and remains off until installation is complete.
Electrical Compliance: If using special control devices, ensure full compliance with N.E.C. requirements. Consult a qualified electrician for questions.
California Proposition 65 Warning: This product contains lead, a chemical known to cause cancer, birth defects, or reproductive harm. Do not place in mouth. Wash hands after handling.
Handling: It is recommended to use a qualified electrician for installation. Handle glass components with care as they are fragile.
Parts Included & Diagram Description
Applicable bulb type: A19, A60, T45, ST58... (Bulb not included)
Parts List
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Saddle | 1 |
| D | Harp | 1 |
| E | Shade | 1 |
| F | Finial | 1 |
Lamp Assembly Components (Bottom to Top):
The lamp is assembled starting with the Body (A). The power cord is fed through the lamp socket (B) and attached to the body. The Saddle (C) connects to the body, followed by the Harp (D) which supports the lampshade. The Shade (E) is placed on the harp, and secured with the Finial (F).
Note: Ensure the power cord does not twist during assembly.
Assembly Steps
- Unpack all parts carefully.
- Prevent the power cord from twisting during assembly.
- Insert the power cord into the lamp socket (B), then secure the lamp socket (B) to the body (A).
- Attach the harp (D) to the saddle (C).
- Place the shade (E) onto the harp (D).
- Tighten the finial (F) onto the harp (D) to secure the shade.
