boAt Stone 190 Pro - User Manual

Product Overview

The boAt Stone 190 Pro is a portable wireless speaker designed for immersive audio experiences.

Product Images: Two views of the speaker are shown, one from the front and one from the side, highlighting the control buttons.

Basic Functions

• Power ON/OFF: Long press the Power button to switch the speaker ON and OFF.
• Switch Mode: Short press the button to change the connectivity mode (BT/AUX/TF Card).
• Increase Volume: Short press the '+' button to increase the volume.
• Decrease Volume: Short press the '-' button to decrease the volume.
• Play/Pause Music: Short press the button to play/pause the track.
• Previous Track: Long press the '-' button to return to the previous track.
• Next Track: Long press the '+' button to skip to the next track.
• Answer Incoming Calls: Short press the button to answer an incoming call.
• Hang Up Calls: Short press the button to end ongoing calls.
• Reject Incoming Calls: Press the button twice to reject an incoming call.
• Redial: Quickly press the button twice to redial the last contacted number.
• Voice Assistant: Double press the button to activate the default voice assistant (Google voice assistant/Siri).
• Disconnect/Reconnect Media Device: Double press the button to disconnect the current connected device. Double press the button again to reconnect the speaker with the previously paired device.

Operating Instructions

AUX Mode

Connect one end of the appropriate cable to the AUX input of the speaker and the other to the external device. Short press the button to select the AUX connectivity mode. In AUX mode, audio playback is controlled via the connected media device/phone.

TWS Function

To pair two Stone 190 Pro speakers: Turn on both speakers in Bluetooth mode. Press and hold the button on one speaker for approximately 2 seconds until a beep is heard. Release the button and wait for the speakers to connect. Enable Bluetooth on your mobile phone, search for "Stone 190 Pro" and pair to play music through both speakers.

TF Card Mode

Long press the power button to switch on the speaker. Insert a Micro SD card into the TF card slot; the speaker will automatically switch to TF card mode. Short press the button to play/pause audio. Short press '+' to increase volume and long press to skip to the next track. Short press '-' to decrease volume and long press to return to the previous track.

Reset Functionality

If the speaker does not turn off or respond properly, press and hold the power button for 8 seconds to reset. This clears the Bluetooth connection history and restores default settings.

Charging

When the battery is low, the speaker will beep every 5 minutes. After three such indications, it will automatically switch off. Insert the provided charging cable to charge the speaker. The LED remains solid red while charging and turns off when fully charged. Avoid using the speaker while charging to maintain battery performance.

Specifications

*Playtime may vary according to the music type & the volume level.

Warning

Please charge the speaker according to the charging norms mentioned to protect the battery.

• Do not disassemble, repair, or modify the product without authorization.
• Do not submerge the product in water.
• Keep the product safe from contact with liquids.
• Store and use the product in a normal temperature environment.
• Do not expose the product to extreme temperatures or heat sources.
• When cleaning, use a soft or slightly damp cloth; do not use chemicals.
• To protect hearing and ensure product longevity, avoid listening at maximum volume for extended periods.

Charging Norms & Precautionary Guidelines:

• Charger/Brick/Adapter: 5V/1A
• Cable/Wire: Standard Cable (35 strands @0.10mm diameter/strand)

Any other accessory can be paired up with the product as long as the specifications meet the above norms.

Package Contents

• 1 x Stone 190 Pro
• 1 x User Manual
• 1 x USB Type-C charging Cable
• 1 x Audio Cable
• 1 x Catalogue
• 1 x Warranty Card