boAt Stone 1500 Bluetooth Speaker
User Manual
Introduction
Thank you for purchasing the boAt Stone 1500. This user manual provides guidance on its features, including Bluetooth wireless technology, AUX, and TWS mode. It is equipped with DSP and offers two EQ modes for indoor and outdoor use. This portable speaker is designed for a smooth interface with minimal effort.
Package Contents
- 1x Speaker
- 1x Type-C Cable
- 1x Aux-in Cable
- 1x User Manual
Product Overview
The boAt Stone 1500 is a portable speaker designed for ease of use. Key components and controls include:
- [USB Type-C Port]
- [AUX-in]
- [USB card reader]
- [Microphone]
- [Volume up button]/[Next track button]
- [Volume down button]/[Previous Track button]
- [play/pause/mute button]
- [power button]
- [Bluetooth indicator]
- [Battery indicator]
- [reset button]
Basic Functions
| Item | Instructions | LED Status |
|---|---|---|
| Power On | Long press [power button] for 2-3 seconds | Blue LED Turns On |
| Power Off | Long press [power button] for 2-3 seconds | Blue LED Turns Off |
| Pairing | Auto Pairing Mode | Blue LED starts flashing |
| Successful Pairing | Select "boAt Stone 1500" | Blue LED stays steady |
| Disconnect | Press [volume up button] and [volume down button] together | Blue LED starts flashing |
| Receive a call | Short press [play/pause/mute button] (Under TWS, only the Main device will work for calls) | |
| Reject the call | Long press [play/pause/mute button] | |
| Hang up the call | Short press [play/pause/mute button] | |
| Call back | Short press [call back button] | Blue LED stays steady |
Modes
Aux-in Mode
Insert the aux cable into the [AUX-in] jack.
USB Reader Mode
Insert USB disk to the [USB reader] jack.
TWS Pairing
Double press the [TWS pairing button].
Disconnect TWS
Press [volume up button] and [volume down button] together.
EQ Modes
Toggle between EQ modes by double pressing the [play/pause/mute button].
- Indoor Mode: Green LED stays solid
- Outdoor Mode: Green LED flashes
Bluetooth Connection
Turn the speaker on by pressing and holding the [power button]. The blue LED will flash quickly, indicating pairing mode. To connect:
- Activate your phone's Bluetooth.
- Go to your phone's Bluetooth settings and scan for new Bluetooth devices.
- Once the device "boAt Stone 1500" is found, click on it.
- If your phone asks for a pairing code, please enter "0000".
- After successful pairing, your speaker will indicate the same with a sound prompt and the LED will flash blue.
Note: Pairing time varies by mobile phone. The speaker can remember the last 8 paired devices.
TWS (True Wireless Stereo)
- Turn on both devices; the blue LED will flash to indicate this.
- Select one of the devices and double press the [power button]. Both devices will pair with each other. During this process, the main device will flash with blue and green LEDs alternatively.
- After successful pairing, the blue LED indicator of the primary (selected) device will start to flash slowly, and the blue LED of the secondary speaker will stay solid.
- On your phone, search for "boAt Stone 1500" and click on it. Once the connection is established, the two devices can play music simultaneously.
- To disconnect TWS, kindly press the [volume up button] and [volume down button] buttons together. The blue LED will flash rapidly to indicate this.
Note: TWS works only in Bluetooth mode. In TWS mode, only the main speaker can receive calls. If the speaker does not connect with the phone, press the [volume up button] and [volume down button] buttons together to disconnect from TWS Mode.
Charging
- Use the Type-C USB cable to charge the speakers.
- Charging: The red light is steady.
- Fully charged: The Red light goes off.
Note: It is recommended that the speakers are not used while they are being charged, as it is not good for the battery.
Troubleshooting
A. The device cannot find "boAt Stone 1500" on Bluetooth?
- Reason: The speaker may not be in pairing mode.
- Solution: Restart the speaker to search again.
B. The speaker is taking very long to charge?
- Reason: The adapter's power output is too low, and the charging cable's consumption is too high.
- Solution: Please choose the adapter with an output that is not less than DC 5V/2A and use the original charging cable.
Specifications
| Specification | Details |
|---|---|
| Product size | Diameter 134 * Height 320 mm |
| RMS Output Power | 40W |
| Music Format | MP3, WAV, WMA, APE, FLAG |
| Bluetooth Version | Version 4.2 |
| Supported functions | USB, Bluetooth, Hands-free, AUX IN, TWS Connection |
| Operating Range | 10 meters |
| THD | ≤10% |
| SNR | ≥80Db |
| Charging Voltage | Type C DC 5V/2A |
| Battery Info | 7.2V/4000mAh |
| Charging time | 4.5 Hours |
| Playing time | Up to 8 Hours (Varies according to level of volume) |
| IP Rating | IPX6 |
| Over Current Protection | Yes |
| Over Voltage Protection | Yes |
| TWS Feature | Yes |
| EQ Modes | Indoor & Outdoor |
Safety Precautions
- Please note that the battery life of the speaker varies with the volume music is being played at. If at a lower volume, the battery life will be longer than when the speakers are playing at full volume.
- If the speaker requires cleaning, please ensure that it is done with the utmost of care. Furthermore, make sure it is turned off and disconnected from all Bluetooth devices. Do not use alcohol, benzene, and other chemicals to clean the speaker. Do not allow the speaker within range of extremely hot or cold substances.
- Try to ensure that no physical damage comes to the speaker via falling, or coming into contact with hard surfaces or sharp edges.
- Do not dismantle the speaker or handle the battery in any way. If any issue arises with the speaker, please enlist the aid of a manufacturer. The battery must not be mishandled or replaced, as it can result in explosions or fire hazards. Therefore, please ensure that any servicing of the speaker is done through the service provider or manufacturer.
- If the speaker gets wet, please ensure that it is dried quickly and completely after coming into contact with water. Please do not allow the speaker to be submerged into water at any cost.
Charging Norms & Precautionary Guidelines
- Charger/Brick/Adapter: 5V 2A
- Cable/Wire: Standard Cable (35 strands @0.10mm diameter/ strand)
Any other accessory can be paired up with the product as long as the specifications are as per the above norms.
