Sharp SPC585 Projection Alarm Clock with Sleep Sounds

Instruction Manual

Introduction

Welcome to your new Sharp SPC585 Projection Alarm Clock with Sleep Sounds. This device combines essential timekeeping functions with soothing sleep sounds and a unique time projection feature to enhance your bedroom experience.

Please read this manual carefully before using your clock to ensure proper operation and to familiarize yourself with all its features.

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions before using.
Do not use this appliance near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
Protect the power cord from being walked on or pinched.
Only use attachments/accessories specified by the manufacturer.
Unplug this appliance during lightning storms or when unused for long periods.
Refer all servicing to qualified service personnel.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.

Getting to Know Your Clock

Familiarize yourself with the controls and features of your SPC585 clock. The main controls are located on the top and front of the unit.

Top Panel Controls:

SNOOZE/LIGHT/PROJECTION OFF: Press to snooze alarm, press and hold to cycle backlight brightness, press to turn off projection.
SOUND: Press to play sleep sounds, press and hold to turn off sleep sounds.
ALARM SET: Press to enter alarm setting mode.
TIME SET: Press to enter time setting mode.
ALARM ON/OFF: Slide switch to turn alarm on or off.

Front Panel Controls:

VOLUME +/-: Adjust volume for sleep sounds or alarm.
PROJECTION ON/OFF: Button to activate or deactivate time projection.

[Diagram Description: A top-down view of the clock showing buttons labeled SNOOZE/LIGHT/PROJECTION OFF, SOUND, ALARM SET, TIME SET, ALARM ON/OFF. A front view showing VOLUME +/- and PROJECTION ON/OFF buttons.]

Setting Up Your Clock

Power Connection:

1. Connect the included AC adapter to the DC IN jack on the back of the clock.

2. Plug the AC adapter into a standard household electrical outlet.

Battery Backup:

1. Open the battery compartment on the back of the clock.

2. Insert 2 x AAA batteries (not included), observing correct polarity.

3. Close the battery compartment.

The battery backup will maintain the time and alarm settings in case of a power interruption. The display and projection will not function on battery power alone.

Setting the Time

1. Press and hold the TIME SET button until the hours digits flash.

2. Press the ALARM SET button (or VOLUME +/- buttons, depending on model variation) to advance the hours. Press and hold for faster advancement.

3. Press the TIME SET button again. The minutes digits will flash.

4. Press the ALARM SET button (or VOLUME +/- buttons) to advance the minutes.

5. Press the TIME SET button one final time to confirm and exit time setting mode. The clock will resume normal operation.

Note: Ensure AM/PM is correctly set if your clock has a 12-hour display.

Setting the Alarm

1. Press and hold the ALARM SET button until the alarm hours digits flash.

2. Use the ALARM SET button (or VOLUME +/- buttons) to set the desired alarm hour. Press and hold for faster advancement.

3. Press the ALARM SET button again. The alarm minutes digits will flash.

4. Use the ALARM SET button (or VOLUME +/- buttons) to set the desired alarm minutes.

5. Press the ALARM SET button one final time to confirm and exit alarm setting mode.

6. To activate the alarm, slide the ALARM ON/OFF switch to the ON position. The alarm indicator icon [bell icon ?] will appear on the display.

7. To deactivate the alarm, slide the ALARM ON/OFF switch to the OFF position. The alarm indicator icon will disappear.

To Snooze: When the alarm sounds, press the SNOOZE/LIGHT/PROJECTION OFF button. The alarm will silence for approximately 9 minutes.

To Stop Alarm: Press the ALARM ON/OFF switch to OFF.

Using the Sleep Sounds Feature

Your clock offers various soothing sounds to help you relax and fall asleep.

1. Press the SOUND button to cycle through available sleep sounds (e.g., ocean waves, rain, white noise).

2. Adjust the volume using the VOLUME +/- buttons.

3. To turn off the sleep sound, press and hold the SOUND button for 2 seconds.

Note: The last played sound and maximum volume level will be used if the alarm is set to wake to sound.

Using the Time Projection Feature

Project the current time onto your ceiling or wall.

1. Press the PROJECTION ON/OFF button on the front panel to activate the projection.

2. The time will be projected in a clear, readable format.

3. To turn off the projection, press the PROJECTION ON/OFF button again, or press and hold the SNOOZE/LIGHT/PROJECTION OFF button on the top panel.

Note: The projection angle may be adjustable on some models. Refer to specific product details if available.

Adjusting the Backlight

The display backlight can be adjusted to your preference.

1. Press and hold the SNOOZE/LIGHT/PROJECTION OFF button on the top panel.

2. Continue holding the button to cycle through the available brightness levels (e.g., Low, Medium, High, Off).

3. Release the button when the desired brightness level is reached.

Note: The backlight may also function as a dimming control for the projection.

Troubleshooting

Clock is not working:

Ensure the AC adapter is securely plugged into both the clock and a working electrical outlet.
Check the battery backup installation and polarity.

Alarm did not sound:

Ensure the ALARM ON/OFF switch is set to ON.
Verify that the alarm time is set correctly (AM/PM if applicable).
Check the alarm volume setting.

Projection is not visible:

Ensure the PROJECTION ON/OFF button has been pressed to activate it.
Check that the room is dark enough for optimal visibility.
Ensure the projection lens is clean.

Display is blank:

Check power connection and battery backup.
Try pressing the SNOOZE/LIGHT/PROJECTION OFF button to activate the backlight.

Warranty Information

This product is covered by a limited warranty. Please refer to the separate warranty card included with your product for full details on coverage, duration, and claim procedures. Keep your proof of purchase (receipt) for warranty service.

	Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds: User Guide Comprehensive guide to operating the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.
	SHARP SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds User Manual Comprehensive user manual for the SHARP SPC276 Digital Alarm Clock, detailing features like Bluetooth connectivity, sleep sounds, alarm functions, dimmer, and sleep timer. Includes setup, operation, safety instructions, and warranty information.
	Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds User Manual This document provides instructions for the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.
	SPC268 Sunrise Alarm Clock with USB Port: Instruction Manual & Warranty Official instruction manual and warranty information for the SHARP SPC268 Sunrise Alarm Clock with USB Port. Learn how to set the clock, alarms, use the sunrise and color-changing lights, and understand safety precautions.
	SHARP SPC483/SPC222 LCD Digital Alarm Clock User Manual User manual providing instructions for setting up and operating the SHARP SPC483 and SPC222 LCD Digital Alarm Clocks, including features, power, care, and FCC compliance.
	SHARP SPC237A Qi Wireless Charging Alarm Clock: User Manual and Safety Guide Comprehensive user manual for the SHARP SPC237A Qi Wireless Charging Alarm Clock. Learn how to set the clock and alarm, use wireless and USB charging, understand safety precautions, and view compatibility information.
	Sharp SPC800-SPC851 Alarm Clock: User Manual and Safety Instructions Comprehensive guide for the Sharp SPC800-SPC851 Alarm Clock, covering setup, operation, battery replacement, care, safety precautions, and FCC compliance.
	SHARP SPC971 Atomic Wall Clock User Manual and Instructions Detailed instructions and safety information for the SHARP SPC971 Atomic Wall Clock, covering setup, battery replacement, and operation.