SHARP SPC237A Qi Wireless Charging Alarm Clock

Introduction

Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a safe place for future reference.

Controls

The clock features the following controls:

• 1. PM indicator: Shows PM time.
• 2. Qi indicator: Indicates Qi wireless charging status.
• 3. AL. VOL HI/LO switch: Adjusts alarm volume (High/Low).
• 4. ALARM 1 button: Controls Alarm 1.
• 5. ALARM 2 button: Controls Alarm 2.
• 6. SNOOZE/DIMMER button: Activates snooze or adjusts display brightness.
• 7. HOUR button: Advances the hour.
• 8. MIN button: Advances the minute.
• 9. TIME button: Sets the clock time.
• 10. Alarm 1 indicator: Shows when Alarm 1 is active.
• 11. Alarm 2 indicator: Shows when Alarm 2 is active.
• 12. USB charging ports: For charging external devices via USB.
• 13. Qi wireless charging area: The surface for wireless charging.

Diagram Description: A visual representation of the clock's front panel, with numbered callouts pointing to each control and indicator. The top surface shows the Qi wireless charging area. The front display shows the time (12:08) and alarm indicators.

Power and Battery

Connecting to the Power Supply

Begin by plugging the power cord into a standard household outlet. The display will flash, indicating the time is ready to be set.

Installing the Time & Alarm Back Up Battery

The clock time and alarm settings can be maintained during a power failure using 2 x AAA batteries (not supplied). Once power is restored, check the time and re-set if necessary.

Inserting the Battery

1. Open the battery compartment at the back of the unit by pressing the catch and removing the cover.
2. Insert 2 x AAA batteries (preferably alkaline) into the compartment, observing correct polarity as shown inside.
3. Replace the battery compartment cover.

Charging Functions

Qi Wireless Charging

Place your Qi-enabled wireless device on the clock's charging area. Charging will begin on contact. The Qi indicator will be continuously solid when charging. For optimal charging, align the device with the center of the charging area. The device's own charging indicator will show normal charging status.

Diagram Description: An illustration showing a smartphone being placed on the clock's Qi charging pad, with an arrow indicating the charging process.

USB Charging

Connect your USB device to one of the USB ports on the clock. Use only with devices requiring 5V USB power. Each port provides 2,000mA recharging current. Devices requiring more than 2,000mA should not be used. Charging time may vary. This device is intended for smartphones only; charging tablets or laptops may void the warranty.

Setting and Using Functions

Setting the Clock

Press and hold the TIME button. While holding, press HOUR to advance the hour (PM indicator lights for PM times) and MIN to advance the minute. Release the TIME button when the correct time is displayed.

Setting the Alarm

Press and hold the ALARM 1/2 button. While holding, press HOUR to set the alarm hour and MIN to set the alarm minute. Release the ALARM 1/2 button when the correct alarm time is displayed.

Using the Alarm Function

Press the ALARM 1/2 button to activate the alarm; the alarm indicator will light up. Use the AL. VOL HI/LO switch to adjust volume. Press the ALARM 1/2 button again to deactivate the alarm.

Snooze Function

Pressing the SNOOZE button after the alarm sounds will pause the alarm for 9 minutes. The alarm will sound again at that time.

Dimmer Function

Press the DIMMER button to cycle through three brightness levels: High, Medium, and Low.

Care of Your Clock

• Replace the backup battery annually or remove it when the clock is not in use for extended periods.
• Clean the clock with a soft cloth or paper towel. Do not use corrosive cleansers or chemical solutions.
• Keep the clock dry. Wipe dry immediately if it gets wet. Keep away from dust and dirt.
• Handle the clock carefully; do not drop it.
• Avoid excessive force, shock, dust, extreme temperatures, or humidity, as these can shorten the clock's life.
• Do not tamper with internal components, as this will invalidate the warranty and may cause damage.

Qi Compatible Devices

This clock is compatible with a wide range of Qi-enabled smartphones, including:

• Samsung Galaxy: S20 Ultra, S20 Plus, S20, Note 10 Plus 5G, Note 10 Plus, Note 10, S10 5G, S10 Plus, S10, S10e, Note 9, S9, S9+, Note 8, S8, S8+, S7, S7 Edge
• Apple iPhone: SE 2020, 11 Pro Max, 11 Pro, 11, XS Max, XS, XR, 8, 8 Plus, and all other Qi-enabled smartphones.

The "Qi" symbol is a trademark of the Wireless Power Consortium. The product is designed for Qi Certificate.

Safety Warnings

General Safety:

• Read all instructions before operating.
• Keep instructions for future reference.
• Heed all warnings on the appliance and in the instructions.
• Follow all operating and use instructions.
• Do not use near water or moisture.
• Clean only with a dry cloth.
• Do not block ventilation openings.
• Do not install near heat sources.
• Do not defeat the purpose of polarized or grounding plugs. Consult an electrician if the plug does not fit your outlet.
• Protect the power cord from damage.
• Use only manufacturer-specified attachments/accessories.
• Use caution when moving carts/apparatus to avoid tip-over.
• Unplug during lightning storms or long periods of non-use.
• Refer servicing to qualified personnel.
• Do not perform servicing beyond operating instructions unless qualified.
• Do not install in confined spaces without adequate ventilation.
• Use only manufacturer-specified accessories.
• Refer to bottom enclosure for electrical and safety information.
• Do not expose to rain or moisture; do not place liquid-filled objects on the apparatus.
• Batteries shall not be exposed to excessive heat.
• The mains plug/coupler must remain readily operable.
• This is a Class II or double insulated appliance; no safety connection to electrical earth is required.

Specific Warnings:

• ⚠️Risk of Electric Shock: Do not remove covers. Refer servicing to qualified personnel.
• ❗Important Information: Refer to operating and maintenance instructions in this literature.
• ?Risk of Explosion: Replace battery only with the correct type.
• Do not place naked flame sources (e.g., candles) on the apparatus.
• Pay attention to environmental aspects of battery disposal.
• The product is designed for moderate climates.

Diagram Description: Warning symbols are used to denote potential hazards: a lightning bolt with an arrowhead in a triangle indicates dangerous voltage; an exclamation mark in a triangle indicates important operating and maintenance information. A visual warning shows a prohibition symbol over metal objects like coins and keys on the charging pad.

FCC Warnings

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Customer Service & Warranty

Customer Service

For Customer Service, please call toll-free at 1-(800)-221-0131, Monday-Friday, 9:00 AM - 4:00 PM EST. Please call for assistance before returning the clock to the store.

One Year Limited Warranty

M.Z. Berger & Company warrants the original consumer purchaser of this product that it shall be free of defects in materials and workmanship for one year from the purchase date. This warranty does not cover defects caused by tampering, improper use, unauthorized modifications or repairs, immersion in water, or abuse. If a defect occurs during the warranty period, carefully wrap the clock and send it to M.Z. Berger & Co., Inc, 353 Lexington Ave - 14th Fl., New York, NY 10016. Include proof of purchase (original receipt or photocopy) and a check or money order for USD $6.00 to cover handling costs. Also include your return address. M.Z. Berger will repair or replace the clock. M.Z. Berger is not liable for incidental or consequential damages. Some states may not allow this limitation.

Printed in China

Model SPC237A

SHARP, registered in the U.S. Patent and Trademark Office.