SHARP SPC268 Sunrise Alarm Clock with USB Port

Introduction

Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a safe place for future reference.

Product Diagram and Parts Identification

The SHARP SPC268 Sunrise Alarm Clock features a digital display and various control buttons. The clock has a modern design with a rectangular main body.

Front View Components:

• Display Area: Shows time, PM indicator, and alarm/sunrise indicators.
• 1. PM indicator: Indicates PM time.
• 2. Alarm 1 indicator: Shows when Alarm 1 is active.
• 3. USB charging port: For charging external USB devices.
• 4. Alarm 2 indicator: Shows when Alarm 2 is active.
• 5. Sunrise indicator: Shows when the Sunrise function is active.
• 6. SUNRISE button: Activates/deactivates the sunrise light function.
• 7. ALARM 1 button: Sets or activates/deactivates Alarm 1.
• 8. ALARM 2 button: Sets or activates/deactivates Alarm 2.

Side/Rear View Components:

• 9. DC 5V jack: For connecting the AC power adapter.
• 10. HOUR button: Used for setting the hour.
• 11. MIN button: Used for setting the minute.
• 12. COLOR button: Controls the color-changing light feature.
• 13. TIME button: Initiates time setting mode.
• 14. Battery compartment: Located at the back for backup batteries (2 x AAA/LR03).
• 15. SNOOZE button: Activates snooze function when alarm sounds.

Connecting to the Power Supply

Begin by plugging the supplied AC adapter into a standard household outlet. Connect the other end of the cord to the DC 5V jack located at the back of the unit.

Installing the Clock & Alarm Backup Batteries

The clock time and alarm settings can be maintained during a power failure by installing 2 x AAA/LR03 batteries (not supplied). Once power is restored, check the time for accuracy and re-set if necessary.

Note: When battery backup is in use, the display will NOT be lit. However, the clock will continue to function, and the alarm will sound at its set time.

Inserting the Batteries:

1. Open the battery compartment at the back of the unit by pressing the catch and removing the cover.
2. Insert 2 x AAA/LR03 batteries (preferably alkaline) into the compartment, following the polarity indicated inside.
3. Replace the battery compartment cover.

USB Charging

To charge your USB device, connect it to the USB port on this clock.

Notes:

• Use only with devices that require 5V USB power.
• The USB port provides a 2,000mA recharging current. Devices requiring more than 2,000mA should not be used.
• Charging time may vary for different devices.

Setting the Clock

• Press and hold the TIME button to activate time setting mode.
• While holding the TIME button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into PM time.
• While holding the TIME button, press the MIN button to advance to the correct minute.
• Release the TIME button when the correct time is shown on the display.

Setting the Alarm

• Press and hold the ALARM 1 / 2 button to activate alarm setting mode.
• While holding the ALARM 1 / 2 button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into PM time.
• While holding the ALARM 1 / 2 button, press the MIN button to advance to the correct minute.
• Release the ALARM 1 / 2 button when the correct alarm time is shown on the display.

Using the Alarm Function

• Press the ALARM 1 / 2 button to activate the alarm; the alarm indicator will be lit.
• Press the ALARM 1 / 2 button again to deactivate the alarm; the alarm indicator will no longer be visible.

Snooze Function

Pressing the SNOOZE button after the alarm sounds will stop the alarm temporarily. The alarm will sound again in 9 minutes. This function can be repeated each time the SNOOZE button is pressed.

Color Changing Light Function

• Press the COLOR button to activate the color-changing light.
• Press the COLOR button again to freeze the current color.
• Press and hold the COLOR button to deactivate the color-changing light.

Sunrise Light Function

This alarm clock features a sunrise light function that gradually brightens 30 minutes before the alarm sounds.

• Press the SUNRISE button to activate this function once ALARM 1 is set.
• To cancel it, press the SUNRISE button again.

Note: The SUNRISE function is enabled only for ALARM 1; it is NOT available for ALARM 2.

Care of Your Clock

• Replace the backup battery annually, or store the clock without a battery when not in use.
• Clean your clock with a soft cloth or a paper towel.
• Do not use corrosive cleansers or chemical solutions.
• Keep your clock dry. If it gets wet, wipe it dry immediately. Keep it away from dust and dirt.
• Handle your clock carefully; do not drop it.
• Do not subject the clock to excessive force, shock, dust, temperature, or humidity, as these conditions may shorten its life.
• Do not tamper with any internal components, as this will invalidate the warranty and may cause damage.

Customer Service

For Customer Service, please call Toll Free at 1-(800)-221-0131 and ask for Customer Service. Available Monday-Friday, 9:00 AM - 4:00 PM EST.

One Year Limited Warranty

M.Z. Berger & Company warrants the original consumer purchaser of this product that it shall be free of defects in materials and workmanship for one year from the purchase date. This warranty does not cover defects caused by tampering, improper use, unauthorized modifications or repairs, immersion in water, or abuse.

If a defect covered by this warranty occurs during the warranty period, carefully pack your clock and send it to:

MZ Berger Service Center
29-76 Northern Boulevard
Long Island City, NY 11101

You must include a Proof of Purchase (original receipt or photocopy), and a check or money order for USD $6.00 to cover handling costs. Also, include your return address inside the package. M.Z. Berger will repair or replace the clock and return it to you.

M.Z. Berger will not be liable for any loss or damage, including incidental or consequential damages, arising from any breach of warranty. Some states may not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.

Important Safety Instructions

1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC Warnings

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Safety Symbols and Explanations

❗ CAUTION: RISK OF ELECTRIC SHOCK ? DO NOT OPEN

⚠️ WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

⚡️ The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

❗ The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

? This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts.