SHARP SPC483 / SPC222 LCD Digital Alarm Clock

Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a safe place for future reference.

Controls

The clock features a digital display and several control buttons:

1. ALARM INDICATOR: A light that illuminates when the alarm is active.
2. SNOOZE INDICATOR: A light that illuminates when the snooze function is active.
3. BATTERY DOOR: Located on the back for battery access.
4. ALARM BUTTON: Used for setting and adjusting the alarm time.
5. TIME BUTTON: Used for setting and adjusting the current time.
6. SNOOZE/BACKLIGHT BUTTON: Activates snooze when the alarm sounds or illuminates the display backlight.
7. HOUR BUTTON: Advances the hour setting for time or alarm.
8. MINUTE BUTTON: Advances the minute setting for time or alarm.
9. ALARM ON/OFF BUTTON: Switches the alarm function on or off.

The main display shows the current time, which was set to 12:08 in the diagram.

Power Supply

This clock operates on two “AAA” batteries (not included). To install batteries:

Remove the BATTERY DOOR.
Insert two new “AAA” batteries, observing the polarity symbols (+/-).
Ensure batteries are new and inserted correctly.

Important:

Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.) batteries.

To Set The Time

Press and hold the TIME button to activate time setting mode.
While holding the TIME button, press the HOUR button to advance to the correct hour. The PM indicator ? will light when the hour is advanced into the PM time.
While holding the TIME button, press the MINUTE button to advance to the correct minute.
Release the TIME button when the correct time is displayed.

To Setting The Alarm

Press and hold the ALARM button to activate alarm setting mode.
While holding the ALARM button, press the HOUR button to advance to the correct hour. The PM indicator ? will light when the hour is advanced into the PM time.
While holding the ALARM button, press the MINUTE button to advance to the correct minute.
Release the ALARM button when the correct alarm time is displayed.

Using The Alarm

To activate the alarm, slide the ALARM ON/OFF switch to the ON position. The alarm indicator ? will be lit.
To deactivate the alarm, slide the ALARM ON/OFF switch to the OFF position. The alarm indicator ? will no longer be visible.

To Use The Snooze Feature

When the wake-up alarm sounds, press the SNOOZE/LIGHT button. The alarm will stop and sound again in five minutes. This cycle repeats each time the SNOOZE/LIGHT button is pressed. The snooze indicator ? will flash to confirm snooze function is activated.

To Use The Backlight Feature

Press the SNOOZE/LIGHT button to illuminate the display backlight for five seconds, aiding night viewing.

Care For Your Clock

Batteries should be replaced if the display or alarm becomes weak or dysfunctional. Store the clock without batteries when not in use. Clean your clock with a soft cloth or paper towel. Do not use any corrosive cleaner or chemical solution. Keep the clock clean and dry.

Battery Warning

Clean battery contacts and device contacts before installation.
Follow polarity (+/-) for battery placement.
Do not mix old and new batteries.
Do not mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel-Cadmium) batteries.
Incorrect battery placement can damage the clock movement and may cause battery leakage.
Remove exhausted batteries from the product.
Remove batteries from equipment not used for extended periods.
Do not dispose of batteries in fire, as they may explode or leak.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

	SHARP SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds User Manual Comprehensive user manual for the SHARP SPC276 Digital Alarm Clock, detailing features like Bluetooth connectivity, sleep sounds, alarm functions, dimmer, and sleep timer. Includes setup, operation, safety instructions, and warranty information.
	Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds: User Guide Comprehensive guide to operating the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.
	SPC268 Sunrise Alarm Clock with USB Port: Instruction Manual & Warranty Official instruction manual and warranty information for the SHARP SPC268 Sunrise Alarm Clock with USB Port. Learn how to set the clock, alarms, use the sunrise and color-changing lights, and understand safety precautions.
	Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds User Manual This document provides instructions for the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.
	SHARP Atomic Wall Clock User Manual and Warranty Comprehensive user manual for the SHARP Atomic Wall Clock, model SPC1107, detailing setup, features, atomic time synchronization via WWVB, troubleshooting, battery replacement, and warranty information. Learn how to set time zones, use the remote sensor, and optimize signal reception for accurate time and temperature display.
	Sharp SPC585 Projection Alarm Clock with Sleep Sounds - Instruction Manual Instruction manual for the Sharp SPC585 Projection Alarm Clock with Sleep Sounds, detailing features like time projection, adjustable backlight, and sleep sounds. Includes setup, operation, and troubleshooting.
	SHARP SPC237A Qi Wireless Charging Alarm Clock: User Manual and Safety Guide Comprehensive user manual for the SHARP SPC237A Qi Wireless Charging Alarm Clock. Learn how to set the clock and alarm, use wireless and USB charging, understand safety precautions, and view compatibility information.
	Sharp C8318A Wireless Thermo Clock User Instructions Comprehensive user manual for the Sharp C8318A Wireless Thermo Clock (SPC900). Provides detailed instructions on setup, features, operation, specifications, alarm functions, time synchronization, and warranty information for this radio-controlled weather station.