Product Overview
The SCOSCHE MotorMouth III is a Bluetooth Wireless Audio Receiver designed to provide hands-free calling and audio streaming capabilities for your vehicle.
Included Elements
- Microphone
- Multifunction Button (MFB)
- USB-C Charging Input
- USB-C Charge Cable (4 ft)
- Relocation Mount with 4 ft. Extension Cable
- Replacement Adhesive Disc for Relocation Mount
Device Setup
Identify the components of your MotorMouth III:
- 1. Microphone: For clear voice transmission during calls.
- 2. Multifunction Button (MFB): Used for power, pairing, music control, and call management. Features an integrated LED indicator.
- 3. USB-C Charging Input: Port for charging the device.
Installation Options
Choose the best installation method for your vehicle:
Option 1: Direct Connection
Plug the 3.5mm jack of the MotorMouth III directly into the AUX input on your vehicle's head unit.
[Diagram: 3.5mm jack connecting to vehicle AUX input]
Option 2: Using the Relocation Mount
Use the included Relocation Mount to connect the MotorMouth III to your vehicle's console AUX input. Mount the adhesive base horizontally on your dashboard, ensuring the microphone end of the unit is pointed towards you for optimal voice pickup.
[Diagram: Relocation mount installation on dashboard, mic pointed forward]
Power On/Off & Pairing
Power On
Press and hold the Multifunction Button (MFB). The Blue LED will flash, indicating the device is on. By default, the device enters pairing mode when first powered on.
Power Off
Press and hold the MFB for 4 seconds. The Blue LED will flash 3 times to confirm. The MotorMouth III will automatically power off after 5 minutes if your phone is out of range.
Pairing Mode
To manually enter pairing mode, press and hold the MFB for 5 seconds. The Blue LED will flash rapidly.
Note: The MotorMouth III will automatically connect to the last paired device. For optimal performance during the initial connection, set the volume on your mobile phone to its maximum level.
Audio Playback & Calling
- Play/Pause Music: Press the MFB once.
- Answer/End/Cancel Call: Press the MFB once.
- Reject Incoming Call: Press and hold the MFB for 2 seconds.
- Redial Last Number: Press the MFB twice.
- Activate Voice Assistant: Press and hold the MFB for 3 seconds.
- Reset Device: Press and hold the MFB for 8 seconds.
Specifications
- Music/Talk Time: Up to 6 hours
- Standby Time: 180 hours
- Charge Time: Approximately 2 hours
- Range: Class II, up to 33 ft (10 m)
- Battery: 110 mAh
- Charge Input: 5V 0.5A
- Bluetooth Version: v5.1
- Supported Profiles: HFP, A2DP, AVRCP
Compliance Information
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.
