BTFREQ Mini: FM Radio and Bluetooth Audio Playback
This guide provides instructions for using the BTFREQ Mini device for FM radio tuning and Bluetooth audio playback.
Section E: FM Radio Mode
Input: Bluetooth audio device (wireless) OR audio device with 3.5mm AUX-OUT ([3.5mm cable included]).
Output: FM audio (wireless).
Instructions:
- Short-press the MODE button ([Button A]) until the FM mode indicator [illuminates], and an FM frequency number [appears] on the display ([Display B]).
- Tune your FM car or home audio receiver to a frequency with no radio station reception ([Tuning C]).
- Press and hold the PLAY/PAUSE button ([Button D]) until the FM frequency number on the BTFREQ matches the frequency on the FM audio receiver.
Diagram Description: A visual guide illustrating the process of tuning the FM radio mode, showing the connection between the BTFREQ Mini and an audio receiver, and the steps for frequency matching.
Section F: BTFREQ Mini Audio Playback
Note: For best results, turn the volume up on the input device and control the playback volume on the output device.
Button Functions:
- Power On/Off: Press and hold
- RX Mode: Press once
- DX Mode: Press once
- FM Mode: Press once
- Enter Pairing Mode: Press twice
- Track Back: Press once ⏪
- Play: Press once ▶️
- Pause: Press once
- Frequency: Press and hold
- Track Forward: Press once ⏩
Diagram Description: An illustration of the BTFREQ Mini device, detailing the location and function of each button, including power, mode selection, playback controls, and frequency adjustment.
Specifications
- Audio Playback Time: 5 hours
- Charge Time: 2 hours
- Battery: 300 mAh
- Charge Input: 5V 500mA
- FM Transmitter Frequency Range: 88.1-107.9MHz (200 KHz steps)
- Bluetooth v5.3
Compliance Information
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Canadian Compliance Statement
This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class [B] digital apparatus complies with Canadian ICES-003, RSS-Gen and RSS-210.
About Scosche
Scosche Industries
1550 Pacific Avenue
Oxnard, California 93033
Designed in Oxnard, California
©2022 Scosche Industries