Introduction
This document provides essential information for the safe setup, operation, and maintenance of your Bestway Lay-Z-Spa inflatable hot tub. Please read all instructions carefully before use to ensure a safe and enjoyable experience.
Safety First
Your safety is paramount. Always adhere to the following guidelines:
Electrical Safety
- Warning: Electrical Hazard. Install the spa at least 2 meters (6.5 feet) away from all metal surfaces.
- Ensure the spa is connected to a properly grounded electrical outlet.
- Do not operate the spa during thunderstorms.
- Keep all electrical appliances away from the spa.
General Safety
- Do not use the spa if it is exposed to direct sunlight and the water temperature is high. Wait for cooler periods before operating.
- Supervise children closely when they are in or around the spa.
- Consult a physician before use if you have any medical conditions, are pregnant, or have recently undergone surgery.
- Avoid alcohol consumption before or during spa use.
- Ensure adequate ventilation around the spa area.
Available Lay-Z-Spa Models
Bestway offers a variety of Lay-Z-Spa models designed for relaxation and enjoyment. Some popular models include:
- Lay-Z-Spa CANCUN
- Lay-Z-Spa Palm Springs
- Lay-Z-Spa HAWAII AirJet & HydroJet
- Lay-Z-Spa HELSINKI
- Lay-Z-Spa MIAMI
- Lay-Z-Spa St. MORITZ
- Lay-Z-Spa IBIZA
- Lay-Z-Spa FIJI
- Lay-Z-Spa HONOLULU
- Lay-Z-Spa PARIS
- Lay-Z-Spa Bahamas
- Lay-Z-Spa TAHITI
- Lay-Z-Spa VANCOUVER
- Lay-Z-Spa Budapest
- Lay-Z-Spa BALI
- Lay-Z-Spa Havana
Each model may feature unique designs, capacities, and jet systems.
Setup and Installation
Follow these general steps for setting up your Lay-Z-Spa:
- Choose a Location: Select a flat, stable, and level surface, preferably outdoors, away from direct sunlight if temperatures are high. Ensure it is at least 2 meters from any metal structures.
- Inflate the Spa: Use the pump's inflation setting to inflate the spa walls and base. Refer to specific model instructions for details.
- Connect the Pump/Heater Unit: Attach the pump, filter, and heater unit to the spa's inlet and outlet connections. Ensure all connections are secure.
- Fill with Water: Fill the spa with water using a garden hose. Do not overfill; check the maximum fill line indicated in your specific model's manual.
- Install Filter and Heat: Insert the filter cartridge and turn on the heating function.
[Diagram: Illustration of the pump and heater unit, showing connections for water inlet/outlet, power, and control panel.]
[Diagram: Close-up view of the control panel, highlighting buttons for massage, heating, and temperature adjustment.]
Operation
Once set up and filled, you can begin operating your Lay-Z-Spa:
- Control Panel: Familiarize yourself with the control panel functions, typically including power, heating, massage (bubble jets), and filtration settings.
- Heating: Set your desired water temperature using the control panel. The spa will automatically heat the water.
- Massage System: Activate the AirJet or HydroJet system for a relaxing massage experience. Note that the massage system may temporarily lower the water temperature.
[Diagram: Diagram illustrating the water circulation system, showing water entering the pump, being heated, and returning to the spa through jets.]
Maintenance and Care
Regular maintenance is crucial for hygiene and longevity:
- Water Chemistry: Regularly test and balance water chemistry using appropriate spa chemicals (e.g., chlorine, pH balancers).
- Filter Maintenance: Clean or replace the filter cartridge regularly according to the manufacturer's recommendations.
- Cleaning: Clean the spa interior and exterior periodically. Drain and clean the spa thoroughly at the end of the season or as needed.
- Winterization: Follow specific instructions for winterizing your spa to prevent damage from freezing temperatures.
Support and Resources
For further assistance, troubleshooting, replacement parts, or to view instructional videos, please visit the official Bestway support website:
