Sainlogic Smart Weather Station

Product Includes:

• Integrated outdoor transmitter
• Gateway
• Rain collector
• Wind Cups
• Wind vane
• Mounting brackets and accessories
• Instruction manual
• Power Adapter

Recommended Tools:

• Precision screwdriver (for small Phillips screws)
• Compass or GPS (for wind direction calibration)
• Adjustable wrench

Step 1:

Locate the battery door on the bottom of the transmitter. Remove the retaining screws on the back of the sensor, remove the battery door, insert 3 new AA batteries, and close the battery door.

Diagram: Shows the outdoor sensor unit with a compass indicating North and South, and an arrow pointing to the battery compartment.

Step 2:

After installing the batteries, the Integrated Outdoor Sensor LED will illuminate for 3 seconds and then blink every 16 seconds. If it does not flash, press the reset button.

Diagram: Close-up of the outdoor sensor showing the LED and RESET button.

Step 3 (Pairing mode):

1. Plug in the gateway with the power adapter.
2. Press and hold the “Pair” button for 3 seconds to enter Pairing mode. The indicator light (red) flashes fast.
3. If the gateway is in pairing status, click once to exit pairing mode.

Diagram: Shows the gateway device plugged in, with an arrow pointing to the 'Pair' button.

Note: You need to check if the device is online in the "Weatherseed" app. Referring to the instructions on the following page. Learn how to make the gateway connect to WiFi and how to download the "Weatherseed" APP and register to log in.

Step 4:

Please search "Weatherseed" APP in Google Play Store or iOS App Store.

Step 5: Register and login to your own Weatherseed account:

1. Fill in the e-mail address.
2. Send a verification code to the e-mail address and enter the code.
3. Set a password (must be consistent with the set password).
4. Confirm the password.
5. Check the user agreement and proof of age.
6. Register account.

Diagram: Screenshot of the 'Create Account' screen in the Weatherseed app, showing fields for email, verification code, and password.

Note: The weather station only supports 2.4 GHz signals. If you have a dual-band router (2.4 GHz and 5.0 GHz), make sure the router's 2.4 GHz band is turned on and separated from the SSID of the 5.0 GHz channel for accurate connection to 2.4 GHz.

Step 6: WiFi Connection Steps (3 steps)

Note: The power adapter needs to be plugged in to connect to WiFi. Battery power cannot connect to WiFi.

Note: Please don't choose the wrong type and model. If you choose the wrong one, you can't match the network successfully.

1. Bluetooth Distribution Network Mode (Recommend)

Press and hold the “Internet” button for 3 seconds; the device will enter the network mode. By default, the first network mode is “Bluetooth distribution network” mode; the indicator light (green) blinks about 0.5s.

1. Select product model. Set the name and location by yourself.

Diagram: Shows the app interface for selecting device type (Professional Weather Station, Home Weather Station, Portable Weather Station) and adding a device.

Diagram: Shows the app interface for selecting the device model (SA9, SA7, SA6 Plus, SA8 Plus) and entering device name and location.

(2) Follow steps 1 through 3 for WiFi connectivity, scan the QR code and then select the distribution method.

Diagram: Shows the app interface for scanning a QR code for Bluetooth distribution.

Diagram: Shows the app interface for selecting the distribution method: Bluetooth distribution network, WiFi distribution network, or Web page distribution network.

(3) Select the “Bluetooth distribution network” to automatically search for Bluetooth signals and pairing. After successful pairing, jump to the WiFi interface. Please select 2.4Ghz WiFi and enter the password.

Diagram: Shows the app interface for configuring network for the device, with options for 2.4Ghz WiFi and 5Ghz WiFi, and fields to enter WiFi name and password.

Diagram: Shows the 'Current Device' and 'My Device' sections in the app, listing paired devices.

2. WiFi Distribution Network Mode

Please press and hold the “Internet” button; the device will enter the “Bluetooth distribution network” mode. Then, please long press the “Internet” button again for at least 3 seconds; the device will enter “WiFi distribution network” mode. The indicator light (green) will blink once in 1s.

After the gateway enters the “WiFi distribution network” mode, please open the APP to start networking:

1. Select product model. Set the name and location by yourself.

Diagram: Shows the app interface for selecting device type and adding a device.

Diagram: Shows the app interface for selecting the device model and entering device name and location.

(2) Follow steps 1 through 3 for WiFi connectivity, scan the QR code and then select the distribution method.

Diagram: Shows the app interface for scanning a QR code for Bluetooth distribution.

Diagram: Shows the app interface for selecting the distribution method: Bluetooth distribution network, WiFi distribution network, or Web page distribution network.

3. Web page distribution network mode

Please press and hold the “Internet” button to enter the distribution network mode; the device will enter “Bluetooth distribution network” mode. Then please long press the "Internet" button again for at least 3s, the device will enter “WiFi distribution network" mode. In “WiFi distribution network” mode, press and hold again for 3s to enter the “Web page distribution network" mode, the indicator light (green) will blink once in 2s.

After the gateway enters the “Web page distribution network” mode, please open the APP to start networking:

1. Select product model. Set the name and location by yourself.

Diagram: Shows the app interface for selecting device type and adding a device.

Diagram: Shows the app interface for selecting the device model and entering device name and location.

(2) Follow steps 1 through 3 for WiFi connectivity, scan the QR code and then select the distribution method.

Diagram: Shows the app interface for scanning a QR code for Bluetooth distribution.

Diagram: Shows the app interface for selecting the distribution method: Bluetooth distribution network, WiFi distribution network, or Web page distribution network.

(3) Choose the "WiFi distribution network" mode, select the router WiFi name (2.4Ghz), then enter the password and click “Next”.

Diagram: Shows the app interface for selecting WiFi network and entering password.

Diagram: Shows the app interface for configuring network for the device, with options for 2.4Ghz WiFi and 5Ghz WiFi, and fields to enter WiFi name and password.

(3)Choose the " Web page distribution network" mode. Click Go to connect to WiFi.

Automatically jump to the WiFi list screen, click Connect " weatherseed " WiFi.

Diagram: Shows the app interface for selecting WiFi network and connecting to 'weatherseed' WiFi.

Diagram: Shows the app interface for switching the device to Web page Network Connection and connecting to the device's Wi-Fi.

(4) Return to the app, click the confirmation dot and click "Next". Please select 2.4Ghz WiFi, enter the password and click "Connect".

Note: Android system can select WiFi. iOS system needs to manually enter the WiFi name.

Contact Information:

Customer Support Email: info@sainlogic.com

Website: www.sainlogic.com

Customer Support Phone: +1 (888) 513-9823 (Mon-Fri 10 a.m. - 6 p.m, Eastern Standard Time)

YouTube: https://www.youtube.com/@sainlogicbrand

Facebook: https://www.facebook.com/sainlogicofficial

Instagram: https://www.instagram.com/sainlogic official/

Twitter: https://twitter.com/sainlogicbrand

TikTok: https://www.tiktok.com/@sainlogic