Sainlogic SA6 Plus Quick Setup Guide

Introduction

This guide provides essential steps for setting up your Sainlogic SA6 Plus weather station. It covers the initial installation of the outdoor transmitter and the display console, along with instructions for connecting to your home WiFi network using the Weatherseed application.

Product Overview

The Sainlogic SA6 Plus system includes an integrated outdoor transmitter, a display console, and necessary accessories for monitoring weather conditions. Recommended tools for setup include a precision screwdriver, a compass or GPS for calibration, and an adjustable wrench.

Setup Steps

1. Install Batteries: Locate the battery door on the bottom of the transmitter. Remove the retaining screws, open the door, insert 3 new AA batteries, and close the door. The outdoor sensor LED should illuminate and blink.
2. Connect Console: Plug the display console into a power outlet using the provided power adapter. For optimal viewing, position the console at a 20-30 degree angle from above.
3. Download & Register App: Search for the "Weatherseed" app on the Google Play Store or iOS App Store. Register for an account by providing your email address, verifying it, and setting a password.
4. Connect to WiFi: Follow the in-app instructions to connect your weather station to your WiFi network. Ensure your router is set to a 2.4 GHz band for compatibility. The guide details Bluetooth, WiFi, and Web page distribution network modes for connection.

Important Notes

• The display console's backlight has three brightness levels, adjustable via the SNOOZE key.
• Using the power adapter for the display console is recommended to conserve battery life and ensure continuous operation. Battery power alone may limit functionality.
• The display console supports only 2.4 GHz WiFi signals.