Sainlogic | Best Home & Personal Weather Stations
User Manual for Sainlogic models including: FT-0835, FT-0835 Wireless Weather Station With Outdoor Sensor, FT-0835, Wireless Weather Station With Outdoor Sensor, Weather Station With Outdoor Sensor, With Outdoor Sensor, Outdoor Sensor, Sensor
Sainlogic Wireless Weather Station with Outdoor Sensor, 8-in-1 Weather Station with Weather Forecast, Temperature, Air Pressure, Humidity, Wind Gauge, Rain Gauge, Moon Phrase, Alarm Clock (No WiFi) : Patio, Lawn & Garden
FT-0835 Professional Weather. Station User Manual. 3. 3.3 Sensor Assembly Set Up ................................................ 6. 3.3.1 Install Integrated ...
FT-0835 User Manual (PDF) sainlogic sainlogic Sainlogic,Wireless,Weather,Station,with,Outdoor,Sensor,8-in-1,Weather,Station,with,Weather,Forecast,Temperature,Air,Pressure,Humidity,Wind,Gauge,Rain,Gauge,Moon,Phrase,Alarm,Clock,(No,WiFi),Black,B0DPX4TB88,B0836JP7XH,B08G1FZZ5M,B086SV8PQ1,B08P5VZKKJ,B0C1NN8X8V
File Info : application/pdf, 52 Pages, 8.97MB
DocumentDocumentFT-0835 Professional Weather
Station User Manual
1. Introduction..........................................................................3 2. Warnings and Cautions........................................................3 3. Getting Started.....................................................................3
3.1 Parts List.........................................................................3 3.2 Recommend Tools.........................................................6 3.3 Sensor Assembly Set Up................................................6
3.3.1 Install Integrated Outdoor Sensor Battery................6 3.4 Display Console..............................................................9
3.4.1 Layout of Display Console.......................................9 3.4.2 Setup the Display Console ....................................10 3.4.3 Connect Sensors with Display Console.................13 3.5 Sensor Operation Verification.......................................14 4. Sensors Pre-Installation.....................................................15 4.1 Test the Sensors Before lnstallation.............................15 4.2 Site Survey Before lnstallation......................................15 4.3 Best Practices for Wireless Communication.................16 5. Final Installation of Sensors...............................................18 5.1 Integrated outdoor Sensor lnstallation..........................18 6. Low Battery lcon................................................................23 7. Display Console Operation................................................23 7.1 Quick Display Mode......................................................23 7.2 Set (Program) Mode....................................................24 7.3 Sensors Search Mode..............................................27 7.4 Max/Min Viewing and Reset Mode...............................27 7.5 Snooze Mode...............................................................28 7.6 Backlight Mode.............................................................29
-1 -
14.FCC Statement..................................................................51
The weather station consists of a display console,a sensor array with Integrated Outdoor Sensor, and mounting hardware.
1.We recommend cleaning the rain gauge every 3 months and replacing the batteries every 3 months. Provide as easy access to the weather station.
20ft (6m) tall and the monting pole is 6ft(2m) tall, install 4 x (20 - 6)' = 56ft (17m) away. Use common sense. If the weather station is installed next to a tall building, the wind and rain will not be accurate.
2.Check the wind,rain and thermo-hygrometer transmitter batteries once every 3 months.
Batteries in base stations with good reception will last at least 3 months. Intermittent reception may shorten battery life. (Use lithium batteries in cold climates below -20 °C). The battery powers the transmitter. The solar panel is only an auxiliary power source; it does not charge the battery.
14. FCC Statement
1. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received,14 including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user' s authority to op erate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
-51-
Manufacturer:
Sainlogic HighTech Innovation Co.,LTD 10342 Cypress Lakes Dr, Jacksonville, FL 32256 United State www.sainlogic.com Email:info@sainlogic.com Skype +15087580493
Time: Mon-Sat (10 a.m. - 2 p.m. EST) FCCID: 2ALHJ-WS020T
-52 -