nVent ERIFLEX FleXbus System

Great tools for quick and easy installation

nVent ERIFLEX FleXbus is an innovative and patented connection solution between two electrical equipment installations, such as transformers, switchboards, generators, or large uninterrupted power supplies (UPS). Its unique concept offers an alternative power connection solution for up to 50% quicker installation and a minimum 20% reduction in total installed cost. Electricians equipped with the appropriate tools can benefit from all the advantages offered by the FleXbus system.

Products from nVent ERIFLEX

Qty	Description	Picture/Photo Description	Usage
1	Aluminum Rail Cutter and Insert Crimper (ref 508174)	A tool designed for cutting aluminum rails and crimping inserts. It appears to be a robust hand tool with distinct cutting and crimping mechanisms.	Cuts FleXbus Aluminum Perforated Profile without burrs or deformation and chip-free. Precise and repetitive cuts. Crimps the threaded rods insert on the aluminum rail.
10	Stripper Cutter (ref 508170)	A hand tool with a blade designed for stripping insulation from conductors. It has a specific notch or cutting edge for precise stripping.	Allows stripping FleXbus Conductors insulation without damaging the conductive multi wires braid.
1	SOK Stripping Knife (ref 559050)	A knife with an insulated handle and a blade designed for scoring insulation. It is shown with a conductor.	Marks the circumference of FleXbus insulation to a shallow depth and facilitates stripping with the stripping cutter.
1	FleXbus Foam Barrier Dispenser (ref 508155)	A dispenser gun, similar to a caulking gun, designed to apply foam barrier material.	Suitable to be used to apply the FBS Foam Barrier.
1	FleXbus Scissor (ref 508172)	A pair of heavy-duty scissors designed for cutting conductors. They have robust blades and ergonomic handles.	Scissor is used to cut the FleXbus Conductor over length. Allows for a clean, smooth cut without causing crushing or deformation.
2	One-Hand automatic Clamps 300 mm	A pair of clamp tools with a single-hand operation mechanism, designed for securing components.	Allows FleXbus conductors to be temporarily attached to transformer pads while HCBC busbars are being installed.
5	1/4" Through Extension 75 mm	A set of extension bars with 1/4" drive, designed to extend the reach of sockets.	Using the 1/4", 10mm Through socket, these extensions can be used with an electric screwdriver to quickly screw nuts onto the threaded rods of FleXbus supports.
1	Through Sockets 1/4", 10 mm	A single socket with a 1/4" drive and a 10mm opening, designed for specific nut sizes.	Suitable socket for screwing the nuts on the threaded rods of FleXbus supports.
1	Ratchet for offset sockets 1/4"	A ratchet handle designed for use with offset sockets, providing leverage in tight spaces.	Using the 1/4", 10mm Trough socket, this ratchet is used to screw nuts onto the threaded rods of FleXbus supports.
12	Plastic Ties Red color removeable - Min 400 mm	A bundle of red, removable plastic zip ties, suitable for temporary fastening.	Used to temporarily secure the HCBC retaining plate to the transformer pad. Do not forget to remove these ties after installation of the conductors and HCBC bar clamps.
1	Stud Puller / Roller Stud extractor M6	A tool designed to insert or extract threaded rods, featuring a roller mechanism.	For mounting threaded rods in aluminum rail inserts.
1	1/2" socket 24 mm	A single socket with a 1/2" drive and a 24mm opening.	For the HCBC Clamps.
5	White grease pencils	A set of white pencils, likely for marking surfaces.	To mark the area of the FleXbus conductor to be stripped or to identify the phases.
1	Deburring tool for M6 Threaded Rods	A tool designed to chamfer or deburr the ends of threaded rods.	For chamfering threaded rods if they have been cut to allow effortless bolting.
1 (30 m)	Repair Tape from 3M, Scotch® 2228	A roll of specialized repair tape, shown being applied to a conductor.	If the FleXbus conductor insulation has been damaged during installation or afterwards, we recommend the use of 3M Scotch® 2228.
1	Torque wrench 100 N/m	A torque wrench calibrated to 100 N/m, used for precise tightening of fasteners.	To check the tightness of HCBC bar clamps.

Other Tools

Qty	Description	Picture/Photo Description	Usage
1	Electro Hydraulic Shear Ø 120	A heavy-duty hydraulic shear tool with a large cutting head, designed for industrial use.	To cut FleXbus conductor over-length cleanly and quickly.
1	5.5 mm flathead screwdriver	A standard flathead screwdriver with a 5.5 mm tip.	To release the FleXbus support compression clips.
1	KNIPEX Pliers for connectors (250 mm) Ref 81 13 250	A pair of specialized pliers by KNIPEX, designed for locking and unlocking compression clips.	Allows easy locking of FleXbus support compression clips in the open position.
1	Press Roller	A roller tool with a wooden handle, used for applying pressure to tape or other materials.	Allows the self-fusing tape to be securely attached to the insulating cover of IP55 conductor entry, IP2x protective covers, and splicing block covers.

Illustrative Usage Examples

The following descriptions are based on visual representations of tools in use:

An electrician is shown using a tool to cut a large, black, flat electrical conductor. The tool appears to be a shear or cutter.
Another image shows a person using a flathead screwdriver to manipulate a clip mechanism on a FleXbus support.
A close-up shows a pair of KNIPEX pliers being used to engage or disengage a compression clip on a FleXbus support.
A person is shown using a roller tool with a wooden handle to press a self-fusing tape onto an electrical component, likely a conductor or connection point, ensuring secure adhesion.
A large-scale installation scenario is depicted, showing multiple electricians working with substantial electrical equipment, including transformers and busbars, utilizing the FleXbus system. This image highlights the industrial application and scale of the system.
A detailed view shows an electrician carefully working with FleXbus conductors and connections, possibly applying tape or securing components, emphasizing precision in the installation process.

	nVent ERIFLEX Flexbus Advanced Fire Barrier: Installation and Technical Guide Comprehensive instruction sheet for the nVent ERIFLEX Flexbus Advanced Fire Barrier, detailing installation procedures, safety guidelines, and technical specifications for fire-resistant conductor penetration seals.
	nVent Battery Energy Storage Solutions: Resilient, Safe, and Efficient Electrical Systems Explore nVent's comprehensive Battery Energy Storage Solutions (BESS), offering robust enclosures, advanced cooling, reliable electrical distribution, and grounding for mission-critical applications. Enhance safety, efficiency, and reduce total cost of ownership.
	nVent ERIFLEX FLEXBUS SHEAR - Product Overview and Specifications Detailed overview of the nVent ERIFLEX FLEXBUS SHEAR, including features, product attributes like article number and material, and important safety warnings. Learn about its precision-ground blades and high-grade steel construction for efficient conductor cutting.
	nVent ERIFLEX IBS Advanced Insulated Braided Conductor: Specifications and Compatibility Comprehensive details on the nVent ERIFLEX IBS/IBSB Advanced Insulated Braided Conductor. Features include halogen-free, low smoke, flame retardant properties, high flexibility, and easy installation. Includes product attributes, certifications, and extensive circuit breaker compatibility data.
	nVent Electrical Connections RoHS Declaration of Compliance This document declares the compliance of nVent Electrical Connections products with RoHS Directive 2011/65/EU and its amendment 2015/863/EU. It lists product families and specific part numbers that are compliant or non-compliant, along with any applicable exemptions.
	nVent Declaration of Compliance: California Proposition 65 nVent's official declaration regarding California Proposition 65 compliance for its Electrical Connections products. This document lists specific products, the Proposition 65 chemicals they contain, and the associated health effects, based on nVent's due diligence and supplier information.
	nVent ERIFLEX IFBS Bracing System for IBS and FLEXIBAR Installation Guide This document provides installation instructions and technical specifications for the nVent ERIFLEX IFBS Bracing System, designed for IBS and FLEXIBAR applications. It includes safety warnings, assembly steps, and performance data.
	nVent TDX100M & TDX200M Series Surge Protection Device Installation Instructions Comprehensive installation guide for nVent TDX100M and TDX200M Series Surge Protection Devices (SPDs). Covers essential safety warnings, step-by-step installation procedures, activation, alarm conditions, and fuse replacement for optimal electrical protection.

Products from nVent ERIFLEX

Other Tools

Illustrative Usage Examples

Related Documents