WaterCop Classic Actuator and Valve Dimensional Drawing
Product Overview
This document provides dimensional information and specifications for the WaterCop Classic Actuator, designed for automatic water shut-off systems. All valves are certified to NSF/ANSI 372 for use with potable water.
Enclosure: Polycarbonate
Power: Power Converter With 20' Cord
Controls: Local Controls
Valve Type: Full Port Brass Ball Valve
Frequency: 418 MHz
Dimensional Specifications
The following table details the dimensions (A through H) and flow rates for various WaterCop Classic actuator models.
| Model | Valve Size | A | B | C | D | E | F | G | H | Flow GPM |
|---|---|---|---|---|---|---|---|---|---|---|
| WCDACT | .74 | 3.78 | 3.25 | 5.00 | 4.05 | |||||
| WCD 1/2 | 1/2 | 1/2-14 NPT | 2.60 | 4.78 | .74 | 3.78 | 3.25 | 5.00 | 4.05 | 19 |
| WCD 3/4 | 3/4 | 3/4-14 NPT | 2.90 | 5.02 | .74 | 3.78 | 3.25 | 5.00 | 4.05 | 34 |
| WCD 1 | 1 | 1-11-1/2 NPT | 3.56 | 5.19 | .74 | 3.78 | 3.25 | 5.00 | 4.05 | 52 |
| WCD 1 1/4 | 1-1/4 | 1-1/4-11-1/2 NPT | 3.66 | 5.18 | .74 | 3.78 | 3.25 | 5.00 | 4.05 | 77 |
Note: Dimensions are in inches unless otherwise specified.
Diagram Description
The document includes two primary diagrams. The first diagram shows a side view of the actuator attached to a ball valve, with various dimensions labeled A through H. The second diagram shows a top/side view of the actuator unit itself, including its enclosure and power cord connection.
Drawing Information:
Title: WaterCop Classic Actuator shown with valve attached
Drawing Number: SUB352
Controlled Status: UNCONTROLLED DRAWING
This print is the property of DynaQuip Controls and shall not be copied, reproduced, loaned, or disposed of directly or indirectly, nor used for any purpose other than that for which it is specifically furnished, except by written permission of DynaQuip Controls.
Manufacturer Information
Manufacturer: DynaQuip Controls
Location: St. Clair, MO 63077
Website: watercop.com
Related Documents
 |
WaterCop Classic HW Actuator with Hard Wired Sensor - Dimensional Data Technical specifications and dimensional data for the WaterCop Classic HW Actuator with Hard Wired Sensor, including valve sizes, flow rates, and NSF/ANSI 372 certification. |
 |
WaterCop Pro Integrated Outdoor Water Shut-Off System Technical specifications and dimensional drawing for the WaterCop Pro Integrated Outdoor automatic water shut-off system, including valve sizes, flow rates, and cable lengths. |
 |
WaterCop Pro Integrated Indoor: Specifications and Dimensions Detailed specifications, dimensions, and valve information for the WaterCop Pro Integrated Indoor automatic water shut-off system. Includes model numbers, cable lengths, sensor compatibility, valve sizes, and flow rates. |
 |
WaterCop Classic Outdoor Actuator Specifications and Dimensions Technical specifications and dimensional drawings for the WaterCop Classic Outdoor Auxiliary Actuator, including valve sizes, flow rates, and model numbers. |
 |
WaterCop Classic Dual Actuator and HW Sensor Dimensional Drawing This document provides dimensional specifications and certifications for the WaterCop Classic Dual Actuator and Hardwired (HW) Sensor system, designed for potable water applications. |
 |
WaterCop Z-Wave with SmartThings Classic App: Setup and Automation Guide Comprehensive guide to setting up and automating WaterCop Z-Wave Actuators and Leak Sensors with the SmartThings Classic App. Covers device inclusion, automation rules, and exclusion procedures. |
 |
WaterCop Pro Actuator WPACT12V Specifications and Dimensions Technical specifications and dimensional drawings for the WaterCop Pro Actuator WPACT12V, including cable lengths, wire gauge, and plenum rating. DynaQuip Controls Corporation. |
 |
WaterCop DC Pro Large Valve Ordering Guide for Indoor Systems Comprehensive ordering guide for WaterCop DC Pro large automatic water shut-off valves, including 1 1/2" and 2" models, actuators, control panels, and connection cables for indoor residential and commercial applications. |