WaterCop Classic Outdoor Auxiliary Actuator
This document provides specifications and dimensional information for the WaterCop Classic Outdoor Auxiliary Actuator.
Product Overview
The WaterCop Classic Outdoor Auxiliary Actuator is designed for use with potable water systems and is certified to NSF/ANSI 372 standards. It consists of an indoor control unit and an outdoor actuator unit connected by a cable.
Indoor Control Unit: Features a 20' long power cord.
Outdoor Unit: An auxiliary actuator connected to the water valve. It is connected to the indoor control unit via a 25', 50', or 75' long outdoor-rated cable.
Diagram Description: The diagram illustrates the indoor control unit with dimensions (5.000" width, 3.250" height) and the outdoor unit, also with dimensions (5.000" width, 3.250" height). The outdoor unit shows the connection to a water valve with dimensions labeled A, B, and C.
Specifications and Models
All valves are certified to NSF/ANSI 372 for use with potable water.
| Model | Cable Length | Valve Size | A | B | C | Flow GPM |
|---|---|---|---|---|---|---|
| WCDACT25W | 25' | 1/2 | 1/2-14 NPT | 2.60 | 3.97 | 19 |
| WCDACT50W | 50' | 3/4 | 1-11-1/2 NPT | 2.90 | 4.21 | 34 |
| WCDACT75W | 75' | 1 | 1-11-1/2 NPT | 3.56 | 4.38 | 52 |
| 1 1/4 | 1-1/4-11-1/2 NPT | 3.66 | 4.37 | 77 |
Drawing Information
Drawing Title: WaterCop Classic Outdoor
Model Number: WCDCACTW
File Number: Sub370
UNCONTROLLED DRAWING
Note: This print is the property of DynaQuip Controls and shall not be copied, reproduced, loaned, or disposed of directly or indirectly, nor used for any purpose other than that for which it is specifically furnished, except by written permission of DynaQuip Controls.
Revision Information: CMM 07-08-75, MWS 11-12-15, MWS 11-12-15
Manufacturer: DynaQuip Controls
