WaterCop Classic HW Actuator with Hard Wired Sensor
This document provides dimensional data and specifications for the WaterCop Classic HW Actuator with Hard Wired Sensor.
Product Variants
WCDACTHW: Features 1 sensor cable attached.
WCDACTHW2: Features 2 sensor cables attached.
All valves are certified to NSF/ANSI 372 for use with potable water.
Dimensional Data and Specifications
| Model | Valve Size | A | B | C | D | E | F | G | H | Flow (GPM) |
|---|---|---|---|---|---|---|---|---|---|---|
| WCDACTHW | - | .74 | 3.78 | 4.10 | 5.00 | 4.05 | ||||
| WCDACTHW | 1/2 1/2-14 NPT | 2.60 | 4.78 | .74 | 3.78 | 4.10 | 5.00 | 4.05 | 19 | |
| WCDACTHW | 3/4 3/4-14 NPT | 2.90 | 5.02 | .74 | 3.78 | 4.10 | 5.00 | 4.05 | 34 | |
| WCDACTHW | 1 1-11-1/2 NPT | 3.56 | 5.19 | .74 | 3.78 | 4.10 | 5.00 | 4.05 | 52 | |
| WCDACTHW | 1-1/4 1-1/4-11-1/2 NPT | 3.66 | 5.18 | .74 | 3.78 | 4.10 | 5.00 | 4.05 | 77 |
Diagram Description
The diagram illustrates the WaterCop Classic HW Actuator with a hard-wired sensor. It shows a main unit with a sensor cable attached. The main unit consists of a control box and a brass ball valve. Dimensions are labeled A through H for various parts of the actuator and valve assembly. A separate view shows the sensor with a 10' cable.
Enclosure: Polycarbonate
Power: Power Converter With 20' Cord
Controls: Local Controls
Valve: Full Port Brass Ball Valve
Frequency: 418 MHz
Manufacturer Information
DynaQuip Controls
Document Control
Drawing Title: WaterCop Classic HW Actuator with Hard Wired Sensor shown with valve attached
Drawing Number: SUB389
This print is the property of DynaQuip Controls and shall not be copied, reproduced, loaned, or disposed of directly or indirectly, nor used for any purpose other than that for which it is specifically furnished, except by written permission of DynaQuip Controls.
Date: 03-07-17
Related Documents
 |
WaterCop Classic Dual Actuator and HW Sensor Dimensional Drawing This document provides dimensional specifications and certifications for the WaterCop Classic Dual Actuator and Hardwired (HW) Sensor system, designed for potable water applications. |
 |
WaterCop Classic Actuator and Valve Dimensional Drawing Dimensional drawing and specifications for the WaterCop Classic Actuator, including valve sizes, dimensions, and flow rates. All valves are certified NSF/ANSI 372 for use with potable water. |
 |
WaterCop Classic Outdoor Actuator Specifications and Dimensions Technical specifications and dimensional drawings for the WaterCop Classic Outdoor Auxiliary Actuator, including valve sizes, flow rates, and model numbers. |
 |
WaterCop Pro Integrated Outdoor Water Shut-Off System Technical specifications and dimensional drawing for the WaterCop Pro Integrated Outdoor automatic water shut-off system, including valve sizes, flow rates, and cable lengths. |
 |
WaterCop Z-Wave with SmartThings Classic App: Setup and Automation Guide Comprehensive guide to setting up and automating WaterCop Z-Wave Actuators and Leak Sensors with the SmartThings Classic App. Covers device inclusion, automation rules, and exclusion procedures. |
 |
WaterCop Pro Integrated Indoor: Specifications and Dimensions Detailed specifications, dimensions, and valve information for the WaterCop Pro Integrated Indoor automatic water shut-off system. Includes model numbers, cable lengths, sensor compatibility, valve sizes, and flow rates. |
 |
WaterCop Pro Actuator WPACT12V Specifications and Dimensions Technical specifications and dimensional drawings for the WaterCop Pro Actuator WPACT12V, including cable lengths, wire gauge, and plenum rating. DynaQuip Controls Corporation. |
 |
WaterCop Z-Wave with SmartThings App Setup and Automation Guide Comprehensive guide to setting up WaterCop Z-Wave actuators and leak sensors with the SmartThings app. Learn how to add devices, create automations for leak detection, and manage temperature alerts. |