WaterCop Pro Actuator WPACT12V
DynaQuip Controls Corporation
Product Overview
The WaterCop Pro Actuator WPACT12V is an automatic water shut-off system component designed for reliable operation. This document outlines its specifications and dimensions.
Specifications
| Model | Cable Length | Wire Ga. | Plenum Rated Cable |
|---|---|---|---|
| WPACT12V | 25' | 22 GA. | YES |
| WPACT12V50 | 50' | 22 GA. | YES |
| WPACT12V75 | 75' | 22 GA. | YES |
| WPACT12V150 | 150' | 18 GA. | YES |
Note: The actuator itself is not plenum rated.
Dimensions and Visual Description
The WaterCop Pro Actuator features a compact unit with a connected cable. The main actuator unit is approximately 4.31 inches in height and 3.78 inches in width. The overall length including the valve connection is approximately 5.00 inches. The unit is blue and white with the 'WaterCop PRO' logo prominently displayed. It includes UL and CSA certifications. The cable is coiled and connected to the actuator unit.
Diagram Description: The diagram shows a coiled cable connected to a rectangular actuator box. The actuator box is mounted on a valve. Dimensions are provided for the actuator unit (height 4.31 inches, width not explicitly stated but implied by the overall 5.00 inch length with valve) and the overall assembly (5.00 inches). Side and top views of the actuator and valve assembly are shown.
Manufacturer Information
DynaQuip Controls Corporation
St. Clair, MO 63077
Website: watercop.com
Document Control
This drawing is an uncontrolled document. It is the property of DynaQuip Controls and should not be copied or used for purposes other than intended without written permission.
Related Documents
 |
WaterCop Z-Wave with SmartThings Classic App: Setup and Automation Guide Comprehensive guide to setting up and automating WaterCop Z-Wave Actuators and Leak Sensors with the SmartThings Classic App. Covers device inclusion, automation rules, and exclusion procedures. |
 |
WaterCop Pro System Wiring Diagram for Dual Control Actuators A detailed wiring diagram for the WaterCop Pro System with Dual Control Actuators, outlining connections for primary and secondary actuators, power supply, and remote valve. |
 |
WaterCop Classic HW Actuator with Hard Wired Sensor - Dimensional Data Technical specifications and dimensional data for the WaterCop Classic HW Actuator with Hard Wired Sensor, including valve sizes, flow rates, and NSF/ANSI 372 certification. |
 |
WaterCop Classic Repeater Dimensional Drawing and Specifications This document provides dimensional drawings and key specifications for the WaterCop Classic Repeater, a range-enhancing device for automatic water shut-off systems. |
 |
WaterCop Pro Integrated Indoor: Specifications and Dimensions Detailed specifications, dimensions, and valve information for the WaterCop Pro Integrated Indoor automatic water shut-off system. Includes model numbers, cable lengths, sensor compatibility, valve sizes, and flow rates. |
 |
WaterCop Pro Integrated Outdoor Water Shut-Off System Technical specifications and dimensional drawing for the WaterCop Pro Integrated Outdoor automatic water shut-off system, including valve sizes, flow rates, and cable lengths. |
 |
WaterCop Z-Wave with SmartThings App Setup and Automation Guide Comprehensive guide to setting up WaterCop Z-Wave actuators and leak sensors with the SmartThings app. Learn how to add devices, create automations for leak detection, and manage temperature alerts. |
 |
WaterCop Pro Large Valve Indoor/Outdoor 3" to 4" Ordering Guide Ordering guide for WaterCop Pro automatic water shut-off systems, detailing components for 3" and 4" indoor/outdoor main water lines, including actuators, control panels, and valves. |