Home Decorators Collection LED Light Fixture

Use and Care Guide

LED Light Fixture

We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this LED light fixture. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Safety Information

IMPORTANT SAFETY INSTRUCTIONS (Save These Instructions)

1. Read all instructions prior to beginning the installation process.
2. Make sure the power is turned off at the electrical panel box before beginning your installation. Turning the power off at the wall switch is not sufficient to prevent electrical shock.
3. This fixture is intended to be mounted to a 4 in. square x 2-1/8 in. deep metal octagon outlet box. The box must be directly supported by the building structure.

WARNING: This lighting is suitable for wet locations.

CAUTION: The LEDs in this product are not replaceable.

CAUTION: Keep the lamp away from materials that may burn.

All electrical connections must be in accordance with local codes and the National Electrical Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified licensed electrician.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Pre-Installation

TOOLS REQUIRED

Ladder, Gloves, Safety goggles, Phillips screwdriver, Electrical tape

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Installation

Step 1: Installing the mounting bracket assembly

Make sure the power is off. Pull the supply wires down out of the outlet box. Fasten the mounting bracket assembly (CC) to the outlet box with the outlet box screws (AA).

Diagram Description: Diagram showing the mounting bracket assembly (CC) being secured to an outlet box using outlet box screws (AA).

Step 2: Making the electrical connections

Attach the ground wire from the outlet box to the ground screw on the mounting bracket (CC), which is green and marked "GND". Connect the negative wires (white wire) from the fixture to the negative wires from the supply circuit, the positive wires (black wire) from the fixture to the positive wires from the supply circuit, and the ground wire (bare) from the fixture to the ground wire from the supply circuit using the wire connectors (BB). Wrap electrical tape (not included) around the wire connectors (BB), and ensure they are secure. Push all excess wire and wire connections back into the outlet box.

Diagram Description: Diagram illustrating electrical connections: ground wire to green ground screw on bracket (CC), fixture wires connected to supply wires using wire connectors (BB).

Step 3: Attaching the canopy to the wall

Raise the canopy (A) up to the outlet box. Secure the canopy (A) to the mounting bracket assembly (CC) using the canopy screws (DD) provided. Adjust the length of the mounting bracket assembly (CC) studs and hex nuts if necessary.

Diagram Description: Diagram showing the canopy (A) being raised and secured to the mounting bracket assembly (CC) with canopy screws (DD).

Step 4: Attaching the glass shade to the fixture body

Attach the glass shade (C) to the fixture body (B) and secure it in place.

Diagram Description: Diagram depicting the glass shade (C) being attached to the fixture body (B).

Package Contents

Warranty

1-YEAR LIMITED WARRANTY

The manufacturer warrants this lighting fixture against defects in materials and workmanship for a period of one year from the date of purchase. If within this period the product is found to be defective in material or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price to the original purchaser or consumer. This warranty does not cover light bulbs or the fixture becoming damaged due to misuse, accidental damage, improper handling and/or installation, and specifically excludes liability for direct, incidental, or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, so the above exclusions and limitations may not apply. This warranty gives you specific rights and you may also have other rights that vary from state to state.

Contact the Customer Service Team at 1-800-986-3460 or visit www.homedepot.com/homedecorators.

Care and Cleaning

CAUTION: Do not use chemical solvents or harsh abrasives to clean the fixture or components, as damage may occur.

To clean the fixture, first disconnect the power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.

Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the interior and exterior surfaces of the fixture. Allow the fixture to dry completely before power is restored.

Troubleshooting

Questions, problems, missing parts? Before returning to store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-800-986-3460 www.homedepot.com/homedecorators. Retain this manual for future use.