NUX '59 Bassguy Overdrive
User Manual
Introduction
The Reissue Series pedal NUX '59 Bassguy Overdrive, housed in a compact, pedalboard-friendly chassis, recreates the legendary tone of the Fender '59 Bassman amplifier. The pedal is equipped with a JUMP switch to emulate the legendary Jumpering function for the Normal and Bright channels. Enhance your creativity with authentic vintage sound with two tonal options.
Features
- Legendary Fender '59 Bassman amplifier emulation.
- Classic knob and panel design.
- Jump switch emulation, simulating the Jumpering function for Normal and Bright channels.
- All-analog circuit.
- True bypass.
Specifications
- Input Impedance: 1 MΩ
- Output Impedance: 820 Ω
- Power: 9V battery or external 9V adapter, providing a minimum current of 200mA (9V DC).
- Dimensions: 121 (L) x 77 (W) x 48 (D) mm
- Weight: 250g
Technical specifications and features are subject to change without prior notice.
All trademarks and model names mentioned in this manual belong to their respective owners, who are in no way affiliated with NUX Effects and Cherub Technology Co. Ltd.
Pedal Overview
Description of the pedal's controls:
- 1. POWER Jack: For connecting a 9V adapter (center negative). NUX ACD-006A adapter recommended.
- 2. GAIN Knob: Adjusts the input signal gain level.
- 3. MASTER Knob: Adjusts the pedal's output level.
- 4. TONE Knob: Adjusts the high-frequency content of the signal, controlling brightness.
- 5. JUMP Switch: Emulates the Fender '59 Bassman Jumpering function for two sound options: Lower position: Normal sound. Upper position: Brighter sound with enhanced treble.
- 6. OUTPUT Jack: For connecting to an amplifier.
- 7. INPUT Jack: For connecting a guitar. Plugging into this jack powers the pedal regardless of whether the effect is on or off. Disconnect the cable when not in use to preserve battery life.
- 8. LED Indicator: Shows the pedal's operating status.
- 9. Footswitch: Engages/disengages the effect.
Battery Installation
A 9V battery is included. Replace the battery when:
- The indicator light is dim or does not light up.
- The effect sound becomes weak or heavily distorted.
Connect the battery wires to the terminals and insert the battery into the pedal's housing.
Accessories
- 9V Battery
- User Manual
- Warranty Card
- NUX Sticker
Important Safety Measures
WARNING:
To reduce the risk of fire or electric shock, keep this unit away from rain and moisture.
CAUTION:
To reduce the risk of fire or electric shock, do not open the unit's housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel or a service center.
Important Symbols:
- The lightning bolt symbol ⚡ in a triangle indicates the presence of dangerous voltage and the potential risk of electric shock.
- The exclamation mark symbol ❗ in a triangle indicates information in the user manual that must be read.
Follow all instructions and heed all warnings. SAVE THESE INSTRUCTIONS!