NUX 59 Bassguy Bass Overdrive Pedal
Concise guide to operating the NUX 59 Bassguy bass overdrive effects pedal.
Product Overview
The NUX 59 Bassguy is a bass overdrive pedal designed to emulate the classic sound of a vintage bass amplifier. It provides a warm, rich overdrive tone suitable for various bass playing styles.
Controls
The pedal features the following controls:
- 1. LEVEL: Adjusts the overall output volume of the effect.
- 2. TONE: Modifies the tonal character, from darker to brighter.
- 3. DRIVE: Controls the amount of overdrive or distortion applied to the signal.
- 4. FOOTSWITCH: Engages or disengages the 59 Bassguy effect. A blue LED indicates when the effect is active.
Connections:
- 5. DC IN: 9V DC power input jack.
- 6. INPUT: 1/4" mono jack for connecting your bass guitar.
- 7. OUTPUT: 1/4" mono jack for connecting to your amplifier or subsequent effects.
[Diagram Description: The pedal is depicted with three prominent rotary knobs labeled LEVEL, TONE, and DRIVE. Below these knobs, the product name "59 Bassguy" is displayed, followed by the NUX logo and "Bass Overdrive". Numbered indicators (1-7) point to the controls and jacks: 1 for LEVEL, 2 for TONE, 3 for DRIVE, 4 for the footswitch, 5 for the DC IN jack, 6 for the INPUT jack, and 7 for the OUTPUT jack.]
Battery Replacement
The pedal can be powered by a 9V battery or an external 9V DC power supply.
To replace the battery:
- Open the battery compartment cover located on the bottom of the pedal.
- Connect the 9V battery to the battery clip.
- Place the battery inside the compartment.
- Close the battery compartment cover securely.
[Diagram Description: An illustration shows a standard 9V battery and a battery clip connector. The battery is shown being connected to the clip.]
Power Supply
Use a 9V DC power supply with a center negative polarity. The pedal consumes approximately 120mA.
Specifications
| Parameter | Value |
|---|---|
| Input Impedance | 1M Ohm |
| Output Impedance | 10k Ohm |
| Sampling Frequency | 44.1kHz |
| A/D, D/A Conversion | 24bit |
| Power Consumption | 120mA |
| Power Supply | 9V DC (Center Negative) |
| Dimensions (L x W x H) | 115mm x 73mm x 48mm |
| Weight | 220g |
Important Safety Information
CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol [⚡] within an equilateral triangle [△] is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle [!] is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Please dispose of this product according to local environmental regulations.
[Logos: CE, UKCA, RoHS compliance symbols are present.]
