NUX Steel Singer Drive User Manual
The NUX Steel Singer Drive pedal from the Reissue Series is an overdrive pedal with the tonal character of the famous Californian boutique amplifier. It features a very smooth high-end and a sweet mid-range. Used as a primary overdrive or in combination with a guitar amplifier, the NUX Steel Singer Drive pedal will make your guitar sing!
Overview
- Pure Analog Circuit
- Warm and Natural Tube Overdrive Tone
- True-bypass Hardware Switching
Specifications
- Input Impedance: 1M Ohms
- Output Impedance: 10K Ohms
- Power: 9V battery or external AC adapter supplying regulated 9V DC, minimum 300mA
- Dimensions: 121(L) x 77(W) x 48(D) mm
- Weight: 230g
Product Interface
1. POWER Jack: To power this pedal, use a standard 9V DC adapter with a negative tip. The optional NUX ACD-006A adapter is recommended. Using an incompatible adapter may cause noise or malfunction.
2. VOLUME Knob: Sets the output volume of this pedal.
3. FILTER Knob: Adjusts the high frequencies.
4. GAIN Knob: Sets the amount of overdrive.
5. OUTPUT Jack: Connect an amplifier to this jack.
6. INPUT Jack: Connect your guitar to this jack. Plugging into this jack activates the power, whether the effect is on or off. When not using the pedal, unplug the cable from this jack to save battery life.
7. ON/OFF Switch: Engages/Disengages the effect.
Battery Installation
The unit is powered by a battery. Connect the snap cable to the battery and insert the battery as shown in the diagram. When the battery drains, the sound will change. If this happens, replace the battery with a new one. The unit powers on when you plug into the INPUT jack. AC adapter use is recommended as the unit's power consumption is relatively high.
Accessories
- 9V Battery
- User Manual
Important Safety Instructions
WARNING! - IMPORTANT SAFETY INSTRUCTIONS. READ INSTRUCTIONS BEFORE CONNECTING TO THE JACK.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. ⚡ [risk of electric shock]
CAUTION: To reduce the risk of fire or electric shock, do not remove screws. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
❗ [attention]. Read all caution information.
Follow all instructions and heed all warnings! KEEP THESE INSTRUCTIONS!
- Do not place the unit near heat sources, such as radiators, heat registers, or appliances that produce heat.
- Prevent objects or liquids from entering the enclosure.
- Refer all servicing to qualified service personnel.
- Prolonged listening at high volume may cause hearing loss and/or irreparable damage. Always practice 'safe listening'.
Certifications and Notes
CE, UK CA, RoHS. Made in China.
* Specifications and features are subject to change without notice.