Important Information & Assembly Tips
Important Information! ❓ Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.
Avoid Scratches! ❌ In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug.
Improve Efficiency! ▶️ Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
Anti-Topple Warning! ⚠️ Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
Important Maintenance Note: It is important that any product assembled using screws is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout its lifespan. For regular maintenance and cleaning, use a rag dipped in neutral detergent to wipe the frame, then dry with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver or excessive force during installation, as the board is easy to break.
Parts List
The following parts are included in the package:
- Part 1: Top Panel
- Part 2: Top Panel
- Part 3: Side Panel
- Part 4: Front/Back Panel
- Part 5: Side Panel
- Part 6: Base Panel
- Part 7: Base Panel
- Part 8: Vertical Support
- Part 10: Horizontal Support
- Part 11: Horizontal Support
- Part 12: Divider Panel
- Part 13: Base Support
- Part 14: Base Support
- Part 15: Base Support
- Part 16: Door/Panel
- Part 17: Door/Panel
- Part 18: Slats
- Part 19: Top Panel
Tools and Hardware Required
Please prepare the following tools: Tape measure, pencil, spirit level, Phillips screwdriver, flathead screwdriver, hammer, wrench.
Hardware List:
- A: Ø 5 x 31 mm (x24+2)
- B: Ø 15 x 11 mm (x24+2)
- C: Ø 8 x 30 mm (x30+3)
- D: Ø 3.5 x 14mm (x24+2)
- E: Ø 6 x 25 mm (x4)
- F: Ø 6 x 35 mm (x22+2)
- G: Ø 3 x 12mm (x2)
- H: Ø 3.5 x 14mm (x4)
- J: Ø 3.5 x 14mm (x4)
- K: Ø 6 x 30mm (x6)
- L: Ø 6 x 60 mm (x4)
- M: Ø 6 x 30mm (x6)
- N: Ø 3 x 12mm (x16+1)
- White nut (x3)
When installing, please carefully confirm whether each screw corresponds to the manual; accessories with similar shapes can be distinguished by size.
Assembly Steps
- Step 1: Attach part 6 and part 7 using 18x F (Ø 6 x 35 mm) and 3x C (Ø 8 x 30 mm) screws.
- Step 2: Attach parts 6 and 7 using 8x A (Ø 5 x 31 mm) and 8x C (Ø 8 x 30 mm) screws.
- Step 3: Attach two parts 10 using 4x C (Ø 8 x 30 mm) screws.
- Step 4: Attach parts 10 and 18 to parts 8 and 11 using 4x L (Ø 6 x 60 mm) screws. Pay attention to the direction of holes on part 10.
- Step 5: Attach part 4 to a side panel (likely part 3 or 5) using 4x A (Ø 5 x 31 mm) and 2x G (Ø 3 x 12mm) screws. Attach brackets using 4x G (Ø 3 x 12mm) screws.
- Step 6: Connect parts 8 and 11 to part 4 using 4x B (Ø 15 x 11 mm) screws.
- Step 7: Connect parts 8 and 3 to part 11 using 2x F (Ø 6 x 35 mm) screws.
- Step 8: Connect parts 5 and 3 to parts 8 and 11 using 2x F (Ø 6 x 35 mm) screws.
- Step 9: Connect parts 6 and 7 to the assembled structure using 8x B (Ø 15 x 11 mm) and 4x E (Ø 6 x 25 mm) screws.
- Step 10: Attach divider panels (part 12) to the top structure using 6x M (Ø 6 x 30mm) screws.
- Step 11: Attach top panels (part 1) and (part 2) to the structure using 12x A (Ø 5 x 31 mm) and 3x C (Ø 8 x 30 mm) screws.
- Step 12: Attach top panels (part 1) and (part 2) to the structure using 12x B (Ø 15 x 11 mm) and 12x C (Ø 8 x 30 mm) screws.
- Step 13: Attach part N (Ø 3 x 12mm) to the structure using 16x N screws.
- Step 14: Attach brackets and parts 16 using 4x H (Ø 3.5 x 14mm), 12x H (Ø 3.5 x 14mm), 4x J (Ø 3.5 x 14mm), and 16x J (Ø 3.5 x 14mm) screws. These are for attaching hinges/latches.
- Step 15: Attach hinges/latches to the main structure using 12x H (Ø 3.5 x 14mm) screws.
- Step 16: Attach hinges/latches to the main structure using 4x J (Ø 3.5 x 14mm) and 2x J (Ø 3.5 x 14mm) screws.
- Step 17: Insert parts 17 (likely feet or stabilizers) using 6x K (Ø 6 x 30mm) and 24x D (Ø 3.5 x 14mm) fasteners.
Safety Information
Serious or fatal crushing injuries can occur from furniture tip-over. ⚠️ To further reduce the risk of serious injury and death from tip-overs, it is crucial to use appropriate wall attachments. If the product does not include them, please purchase suitable wall attachments for your wall type. Seek professional advice if unsure. Follow all assembly instructions carefully.
German translation: Schwere oder tödliche Quetschverletzungen können durch Umkippen von Möbeln auftreten. Um das Risiko schwerer Verletzungen und Todesfälle durch Umkippungen weiter zu reduzieren.
Warranty Information
Warranty Claims:
- A 30-day warranty is provided for broken furniture or other functional problems, starting from the date of purchase verified by proof of purchase.
- For claims, contact the seller and provide your purchase order number and problem details. Replacement parts will be arranged within 48 hours. If a part is out of stock, a shipping date will be provided.
- The product must be used according to the provided instructions for health reasons.
- If the furniture needs to be returned for other reasons, it must be cleaned and dried, and the return initiated within 30 days of receipt.
Type of Warranty Claim:
- Failure to follow furniture instructions will invalidate the warranty.
- Damage during installation is not covered, but damage during transportation is.
Scope of Responsibility:
- The seller is not responsible for misuse, user damage, or loss of parts during installation.
- Damage and scratches occurring after use are not covered by the warranty.
Warranty Coverage (The US):
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
If you have not received all packages, wait 3-5 extra days as they may be in transit. Contact the seller or delivery service promptly if the expected delivery date has passed and packages are missing to avoid further delays. Please note the product may arrive in 2 packages.
Returns Policy
Changed Your Mind and Need to Return Your Item?
- If you have simply changed your mind after purchase, follow the retailer's specific instructions for returns.
Defective Items:
- If your item is defective in any way, and you cannot identify the cause, please contact the seller in the first instance.
Damaged Items:
- If you receive an order with obvious shipping damage, it is recommended to refuse the delivery.
- If delivery has been accepted and shipping damage is later discovered, please follow the specific instructions provided by the retailer.
- In all circumstances, please save all packaging material and paperwork for the order. Disposing of packaging material or attempting to return merchandise without contacting the fulfillment center may jeopardize your claim and credit for the return.
