STRÅLA LED Candle Light
Designed and Quality by IKEA of Sweden
Important Information & Safety Warnings
⚠️ For indoor use only.
⚠️ Always remove the batteries before storing.
⚠️ The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
⚠️ Only use batteries that are intended for the product. Do not mix old and new batteries, different brands or types.
Assembly Instructions
Parts Included:
- Base disc (1x)
- Lower pole section (1x)
- Upper pole section (1x)
- Screw (1x)
Step 1: Assemble the Base
Secure the lower pole section to the base disc using the provided screw. Use a screwdriver to tighten the screw.
[Diagram: A person holding a screwdriver, tightening a screw into the base disc and lower pole section.]
Step 2: Insert Batteries
Insert batteries (not included) into the upper pole section. Ensure correct polarity (+/-). Do not dispose of batteries in household waste.
[Diagram: AA batteries being inserted into the upper pole section. A crossed-out symbol indicates incorrect battery disposal.]
Step 3: Connect Pole Sections
Connect the upper pole section to the assembled lower pole and base. The sections should click or screw together.
[Diagram: A hand connecting the upper pole section to the lower pole section.]
Product Care
This product is designed for indoor use only.
When storing the product, always remove the batteries.
The light source is integrated and cannot be replaced. If the light source fails, the entire luminaire must be replaced.
