oneisall Pet Grooming Vacuum LM5 Manual
Model: LM5 | Part Number: ON-D103
Package Contents
- Main Vacuum Machine x 1
- Hose x 1
- Crevice Tool x 1
- Cleaning Brush x 1
- Deshedding Brush x 1
- Grooming Brush x 1
Safety Warnings
Important Safety Instructions:
- Read all safety and operating instructions before use.
- Supervision is required for use by children aged 8+ or persons with reduced capabilities. Children should not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, service agent, or qualified persons to avoid hazards.
- Do not use to suck up water.
- Do not disassemble the product; incorrect assembly may cause electric shock or fire. Contact the company for maintenance.
- Do not immerse in water for cleaning.
- The hose should be checked regularly and not used if damaged.
- Keep the dust cup and filter clean.
- The appliance is only to be used with the provided power supply unit.
- Remove the plug from the socket-outlet before cleaning or maintaining the appliance.
- Do not inhale flammable or combustible liquids (e.g., gasoline) or use the machine near flammable or combustible gases.
- Do not use while smoking or near high-temperature items (matches, hot ash).
- Do not put objects into openings or block them. Unplug the power cord when changing parts or performing maintenance.
- Do not use or keep outdoors or in wet places. Avoid products with fragrance, as they may contain flammable chemicals.
Product Overview
The oneisall Pet Grooming Vacuum features a main unit with a dust cup, a hose, and various accessories. Key controls include a Speed Control Button, Speed Light indicator, Switch Button, and Dust Cup Remove Button.
Product Technical Parameters
| Parameter | Specification |
|---|---|
| Input Voltage | UK: 220V-240V~50Hz / US: 110V~130V~60Hz |
| Power | 300W |
| Hose Length | 1.5M |
| Dust Cup Capacity | 1.5L |
| Product Size | 302x220x130MM |
| Wire Length | 2.5M |
| Maximum Noise | 60dB |
Operation Instructions
1. Install the Dust Cup
- Align the snap-fit of the dust cup with the main unit.
- Press the dust cup down firmly by hand until it clicks into place.
Note: If the device has no suction or is very noisy, please reinstall the dust cup.
2. Ready to Use
- Connect the desired accessory to the vacuum cleaner through the hose.
- Insert the power plug into the socket.
- Turn on the switch button to begin vacuuming.
- Select the desired speed using the Speed Control Button. It is recommended to start with Silence Mode for first-time use to help your pet adjust to the noise.
Note: There are 3 cleaning modes: Silence Mode, Standard Mode, and Max Mode.
3. Grooming Your Pet
Gently move the accessory over your pet's coat. Hair and dander will be sucked into the dust cup. The collected hair can then be disposed of directly into the trash.
Use of Different Accessories
1. Daily Grooming Brush
Used to clean floating hair and dander, promoting healthier, shinier, and softer fur.
Action: Gently brush your pet's coat. Hair is sucked in.
2. De-shedding Brush
Designed to remove long, thick, and unnecessary undercoat hair.
Action: Brush your pet to remove loose undercoat. Hair is sucked in.
Note: During use, pay attention to the cutting edge and position. Do not use excessive force, as it may cause skin irritation.
3. Cleaning Brush
Ideal for cleaning pet paws or removing pet hair from clothes and furniture.
Action: Use on paws, clothing, or furniture to collect hair.
4. Crevice Tool
Effective for cleaning hair on furniture and in hard-to-reach areas.
Action: Use in corners, crevices, or on upholstery to remove hair.
Accessory and Power Mode Guide
| Accessory | Silence Mode | Standard Mode | Max Mode |
|---|---|---|---|
| Daily Grooming Brush | Cleans fallen hair from surfaces. Makes hair smooth. (A little noisy) | Airflow massage, makes hair glossy. (Recommended) | Deep cleaning to remove dead hair. (A little noisy) |
| De-shedding Brush | Soft suction to de-shed pet hair. | Deep clean hair on your clothes. | Strong suction power to de-shed pet hair. (A little noisy, but recommended) |
| Cleaning Brush | Cleans surface dust and pet hair. | Deep cleaning of stubborn dust. (A little noisy) | Strong suction power. (A little noisy, but recommended) |
| Crevice Tool | Soft suction for cleaning corners or other hard-to-reach areas. | Deep cleaning of corners or other hard-to-reach areas. | Strong suction for stubborn dust in corners. (A little noisy, but recommended) |
Care and Maintenance
Cleaning the Dust Cup
- Press the dust cup release button and detach the dust cup from the main unit.
- Press the release button on the dust cup and pour out the collected hair and debris.
- Re-attach the dust cup to the main unit by aligning it according to the arrow direction and pressing it down until it clicks.
Important: If the dust cup is cleaned with water or a wet cloth, ensure it is completely dry before re-installing. Failure to do so may damage the motor. Handle the dust cup gently; it can be easily damaged if dropped.
Cleaning the HEPA & Sponge Filter
- Remove the dust cup and then carefully remove the HEPA and sponge filter from the main unit.
- Gently tap the filter to remove loose debris or use a soft brush. Do not wash the filter with water.
- Place the cleaned HEPA and sponge filter back into the machine.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cannot be turned on | Plug not inserted correctly. | Reinsert the plug. |
| Switch not turned on. | Press the switch button to turn it on. | |
| Weak suction | Flexible hose is clogged. | Clean the flexible hose and suction mouth. |
| Dust cup is too full. | Empty the dust cup. | |
| Filter is dirty. | Clean the filter. | |
| The hose is broken / Whistle-like noise when the machine is running | Accidental damage. | The hose is detachable and can be stored in the provided bag. |
| Bitten by pets at home. | The hose is detachable and can be stored in the provided bag. | |
| The Dust Cup snap is not aligned. | Check whether the Dust Cup is installed correctly. |
If the above solutions do not resolve the problem, please stop using the product and contact customer support at support@oneisall.com.
Warranty Information
12-Month Warranty & Lifetime Customer Support
This warranty applies only to eligible purchases made directly from oneisall authorized distributors. Coverage is for the original owner and the original product only and is not transferable.
How to Initiate a Warranty Claim
If your appliance operates improperly under normal household conditions within the warranty period, please contact our customer support team at support@oneisall.com to initiate a claim.
For more warranty details, please refer to www.oneisall.com. All rights are reserved by the oneisall official website.
GPSR Product Information
EU Representative
Name: Apex CE Specialists GmbH
Address: Grafenberger Allee 277-287, 40237 Düsseldorf, DE
Contact Person: Wells Yan
Tel: +353212066339
Email: Info@apex-ce.de
UK Representative
Name: APEX CE SPECIALISTS LIMITED
Address: 6f East Union Street, Manchester, England, M16 9AE
Contact: Wells
Tel: +441616371080
Email: Info@apex-ce.com
Manufacturer Information
Business Name: chuzhouguanyidianzishangwuyouxiangongsi
Manufacturer Address: CN, 239200, anhui, chuzhoushi, laianxian, xinanzhenqingliuxilu, taixinxiangzhangyuan1dong1danyuan2403shi
Telephone: +86 130 4980 3796
Email: oneisallofficial@hotmail.com
Product Name: Pet Grooming Vacuum
Brand: oneisall
Product Model: LM5
Input: 220V~230V~50Hz
Power: 300W
Made in China
Contact Us
For any issues or inquiries, please contact oneisall customer support at support@oneisall.com.
