Oneisall BM1 Pet Grooming Vacuum and Dryer Kit

Safety Warnings ⚠️

• This product is for household use only, not for commercial or industrial use, or outdoors or in wet rooms.
• Children and individuals with physical or mental disabilities may only use the equipment under supervision.
• Use the equipment in a safe environment and according to instructions. Ensure supervision by someone aware of safe use and hazards. Never let children use the device without supervision.
• Exercise caution when the device is used near children and animals. Do not allow children or pets to play with the product.
• Do not touch the power plug and the product with wet hands.
• Do not use the product if the power cord or plug is damaged.
• If the product malfunctions, is damaged, or has been submerged in liquid, please contact Oneisall. Do not disassemble the product; improper assembly can cause electric shock or fire. For maintenance, contact Oneisall.
• Do not vacuum flammable or combustible liquids like gasoline. Do not use the device in or near environments containing flammable or combustible gases.
• Do not pull the power cord, place heavy objects on the device, or pinch the cable.
• Do not use the device while smoking or using other high-temperature items (matches, hot ash, etc.).
• Ensure the hole is not blocked before use.
• Unplug the power cord for maintenance.
• Do not use or store the device outdoors or in other wet locations.
• Do not use perfumed products as they may contain flammable chemicals.
• Use the product only at the specified voltage, indicated on the bottom of the appliance.

Precautions ❗

• Do not handle or unplug the device's power cord with wet hands to avoid electric shock.
• Do not smoke or use other flammable materials.
• Do not use the device in or near environments containing flammable or combustible gases.
• A strange smell may occur during the first use, but it will not negatively affect the body and will disappear after a while. If the burning smell persists, stop using it immediately!
• Keep the dust container and filter clean. Using them in a dirty state can cause product malfunction.
• Before maintenance, turn off the device and unplug the power cord. Turning on the device for maintenance can cause electric shock, unexpected accidents, or injury.
• The product will stop if the temperature rises excessively. If the motor overheats abnormally, stop using it immediately.
• If the suction port is blocked, stop using the device immediately. Remove the dust container, clean the inlet and filter, and reopen after 60 minutes.
• Ensure the filter is installed and used correctly. Removing the filter can damage the motor.

Package Contents ?

• Main Unit x1
• Vacuum Hose / Dryer Hose x1
• Combs (3-6-9-12-18-24mm) x6
• Hoover Accessories: Hair Clipper, Brush for shedding, Brush for cleaning crevices, Long narrow nozzle, USB cable for charging.
• Dryer Accessories: Round nozzle, Narrow nozzle, Diffuser for coarse hair.

Product Overview ⚙️

The device features:

• Vacuum/Dryer Switch
• Airflow Control Knob
• Drying Temperature Control
• Temperature Display (°C)
• Handle
• Dust container release button

The main unit has a power button, airflow control knob, and temperature settings. The hose connects to the main unit, and various attachments can be fitted to the end of the hose for different grooming functions.

What to do if my pets get nervous? ??

If your pet is nervous due to the noise or airflow, you may need to acclimate them to the device.

1. Let your pet hear the device's sound or feel the slower airflow.
2. Offer your pet a treat.
3. Start using the vacuum or dryer. If your pet is still nervous, try repeating steps 1-2 to let them know the device is not harmful.

When using the grooming attachments, press the button to operate the clipper. Be cautious of the cutting edge and the area being cut, and do not apply excessive force to avoid skin irritation.

Vacuuming Fur ?

1. Attach the vacuum hose.
2. Attach the vacuum accessories.
3. Connect the power supply.
4. Switch to cleaning mode.
5. Select the speed.

Note: In vacuuming mode, the temperature cannot be adjusted. Only the speed can be adjusted.

6. Groom your pet.
7. Clean the dust container.

Recommendation: Start with a low speed during the first use, as the animal needs time to get used to the noise.

Drying the Coat ☀️

1. First, use a towel to absorb dripping water.
2. Attach the dryer hose.
3. Install dryer accessories.
4. Connect the power supply. Switch to drying mode.
5. Select the air speed.
6. Select the temperature. You can choose from seven different Celsius degrees: 35-40-45-50-55-60-65°C.
7. Begin drying the coat.

Notes: 1. The dryer/vacuum can be switched without interrupting the power supply. 2. In drying mode, both speed and temperature can be adjusted. 3. For sensitive areas, it is recommended to use lower temperatures and gentle airflow first. 4. The temperature can be increased during the drying process.

Tips for Accessories ?️

• Brush for shedding: The curved teeth of the comb adapt well to the back and head. It is used to remove undercoat. Be careful with your pet's soft body parts and do not apply excessive force to avoid scratching the skin. Do not press the PUSH button if it is not needed.
• Poodle Brush: The larger tooth surface of the comb is suitable for large dogs with dense fur and is used to remove loose fur and undercoat. This makes the fur fluffier and healthier.
• Animal Hair Clipper:
  1. Used to trim pet fur without mess, as the hair does not fly around.
  2. It sucks in cut hair while cutting!
  Use the clipper with or separately from the vacuum. The clipper has LED indicators: 3 blue LEDs light up when the battery is fully charged; a red light flashes when the battery charge is less than 10%. Be careful with the cutting edge and the cutting area, and do not apply excessive force, as this can cause skin irritation.
• Fitting Comb Attachments (for use with clippers): Select the comb attachment according to the desired hair length. The comb attachment set (3mm/6mm/9mm/12mm/18mm/24mm) can be used for different hair lengths. The comb attachment set is small; store it properly when not in use.
• Long Narrow Nozzle: Used for cleaning carpets, corners of sofas, cars, and cat scratching posts.
• Hair Removal Roller: Effectively removes pet hair stuck to clothing. Can be used with or separately from the vacuum. Move the removal roller back and forth. Do not move it in only one direction.
• Round Nozzle: Concentrated air jet for quick drying of the undercoat or small areas. Recommended for animals with undercoat or sensitive body parts, and for the head and paws of large dogs.
• Narrow Nozzle: Concentrates airflow, allowing hair to be dried over a large area. Recommended for quick drying of hair on the entire body.
• Diffuser for Coarse Hair: Disperses airflow. Dries and detangles hair on the surface. Makes hair silky and fluffy. Recommended for dry fur on the back, abdomen, and head. For long-haired dogs or cats.

Tips for drying the coat: First, dry the undercoat with the round nozzle, then dry the fur on the upper surface with the narrow nozzle or diffuser.

Maintenance ?

• Cleaning the Dust Container:
  1. Turn off the power supply.
  2. Pull the dust container handle.
  3. Press the release button and empty the hair.

  Notes: 1. If the removed dust container is cleaned with water or a damp cloth, it must be installed after it is completely dry. Failure to do so may damage the motor. 2. Handle the dust container gently. It can be easily damaged if dropped. If you have any problems with the container, please contact Oneisall via Amazon or email: support@oneisall.com.

• Cleaning the Animal Hair Clipper Blades:
  1. Push out the blades with your hand.
  2. Clean and wash the blades.
  3. Dry the blades with a cloth and drip oil on them.
  4. Align the slot under the blades and push the blades in to fit.

  Note: The package does not include oil. You must order it yourself.

• Cleaning the HEPA Filter and Sponge Filter:
  1. Remove the dust container and take out the HEPA filter and sponge filter.
  2. Clean them with a brush; do not wash them with water.
  3. Reinstall the HEPA filter and sponge filter into the device.

Troubleshooting ❓

If the above solutions do not solve the problem, please stop using the product and contact customer service: support@oneisall.com.

Specifications ?

Main Unit

Animal Hair Clipper

Oneisall Support

If you have any problems, please contact support@oneisall.com.

Visit Oneisall Official and Oneisall Support for more information.

Check out the Tutorial Video for guidance.

Precautions for Charging ?

1. Ensure the device's contacts are clean before charging.
2. Never leave the device unattended while in use and charging.
3. Ensure you can quickly disconnect the device from the power source in case of emergency.
4. Never expose the device to high temperatures.
5. Charge the device in a dry and well-ventilated area, away from flammable materials, maintaining a distance of at least 1m from other objects.
6. Never cover the device while charging.
7. Never use power adapters, charging stations, cables, etc., without the manufacturer's recommendation and approval.
8. Take care of your property; the device is equipped with hard-to-read cells; equip yourself with a fire extinguisher.

Environmental Protection ?

In accordance with EU directives, electronic waste labeled as such should not be disposed of with other municipal waste. It must be collected separately and recycled at designated locations. Proper disposal helps avoid potential negative consequences for the environment and human health. The collection system for used equipment complies with local environmental regulations for waste disposal. For more detailed information, contact your city office, waste management service, or the store where you purchased the product.

The product complies with the requirements of the European Union (EU) New Approach Directives concerning safety, health, and environmental protection, which define hazards to be identified and eliminated.

This document is a translation of the original user manual provided by the manufacturer.

The device is equipped with a rechargeable battery that ages over time and with use due to its physical and chemical structure. The manufacturer provides the maximum operating time of the device under laboratory conditions where operating conditions are optimal for the device, and the device's battery is new and fully charged. Actual operating time may differ from the time stated in the offer and is not a defect of the device.

The product must be regularly maintained (cleaned) by the user or a specialized service center at the user's expense. If information on necessary cyclical maintenance or servicing is not included in the user manual, the physical condition of the product should be assessed for deviations from the physically new product at least once a week. If any deviations are noticed or found, maintenance (cleaning) or servicing measures must be carried out immediately. Failure to perform proper maintenance (cleaning) and to respond to the identified deviation may result in permanent damage to the product. The warranty provider is not responsible for damages caused by negligence.

LI-ION Battery

The device is equipped with a lithium-ion battery that ages over time and with use due to its physical and chemical structure. The manufacturer provides the maximum operating time of the device under laboratory conditions where operating conditions are optimal for the device, and the battery itself is new and fully charged. In reality, the operating time may differ from the stated time, and this is not a device defect but a product characteristic. To maintain the maximum lifespan of the battery, it is not recommended to discharge the battery below 3.18V or 15% of its full capacity. Values lower than this, such as 2.5V per cell, will permanently damage it, and the warranty does not cover this. If you do not use the battery or the entire device for more than a month, charge the battery to 50% and check the charge level regularly every two months. Store the battery and the device in a dry place, protected from the sun and negative temperatures.

LIPO Battery

The device is equipped with a LIPO (lithium-polymer) battery that ages over time and with use due to its physical and chemical structure. The manufacturer provides the maximum operating time of the device under laboratory conditions where operating conditions are optimal for the device, and the battery itself is new and fully charged. In reality, the operating time may differ from the stated time, and this is not a device defect but a product characteristic. To maintain the maximum lifespan of the battery, it is not recommended to discharge the battery below 3.5V or 5% of its full capacity. Values lower than this, such as 3.2V per cell, will permanently damage it, and the warranty does not cover this. If you do not use the battery or the entire device for more than a month, charge the battery to 50% and check the charge level regularly every two months. Store the battery and the device in a dry place, protected from the sun and negative temperatures.

Warranty Card ?

Importer Name and Address: INNPRO Robert Błędowski, ul. Rudzka 65c, 44-200 Rybnik, Poland

Seller's Name and Address (Distributor, liable for statutory warranty):

Date of Purchase (contract conclusion) and handover to consumer:

Invoice Number/Package Number:

Product Information:

• Type:
• Name:
• Identification Number:
• Warranty Length:

Dear Customer,

Thank you for choosing the product distributed by INNPRO. We hope you will find our product useful. It is unlikely that the product will require repair during use, but if it does, you can contact the seller (distributor) directly for assistance. To avoid inconvenience, please read the operating manual carefully before contacting the distributor.

WARRANTY CONDITIONS

Regarding the Products, the product owner can claim warranty according to the warranty conditions recorded herein, provided that they qualify as a consumer (“a natural person acting outside the scope of their profession, independent occupation, or business activity”). The warranty claim can be made against the seller (distributor) at any time during the warranty period by presenting the original Warranty Card.

EXCLUSIONS AND LIMITATIONS

The importer does not provide any warranty regarding the quality, performance, accuracy, reliability, or suitability of the product or any software included as part of any accessory. The seller (distributor) is released from warranty obligations if the seller (distributor) or the service authorized to perform warranty repairs proves that the cause of the defect arose after delivery.

The warranty does not cover the following cases:

• a) Physical damage, fire damage, or water damage not resulting from a manufacturing defect, including, but not limited to, user errors;
• b) Damage due to improper use, unauthorized disassembly, or tampering with the product, not in accordance with the user manual;
• c) Water damage not resulting from improper preparation, use, or use not in accordance with the user manual;
• d) Unauthorized modification of the circuit, damage resulting from improper battery use;
• e) Damage resulting from use in adverse weather conditions (e.g., storms, sandstorms, rain, etc.);
• f) Damage resulting from operation in a high electromagnetic field;
• g) Damage resulting from operation in other high-interference environments;
• h) Damage resulting from low battery voltage or faulty battery use;
• i) Products whose identification number has been falsified or destroyed;
• j) Products that do not have proof of sale, or the proof of sale does not demonstrably belong to that product, or the proof of sale is falsified;
• k) Damage resulting from improper storage, transport, or dropping;
• l) Vandalism;
• m) Malfunction due to reasons arising after purchase;
• n) Failure to perform regular checks and maintenance prescribed by the manufacturer;
• o) Any intervention or repair that caused the defect or its cause, which was not performed by an authorized service center indicated on this warranty card.

STATUTORY WARRANTY

For products purchased in Hungary within the scope of a consumer contract and brought into circulation by the distributor, a mandatory statutory warranty applies according to Government Decree 151/2003. (IX. 22.), the duration of which is calculated from the date of handover or commissioning of the product by the seller or the seller's intermediary:

• For a selling price reaching HUF 10,000 but not exceeding HUF 100,000, one (1) year;
• For a selling price exceeding HUF 100,000 but not exceeding HUF 250,000, two (2) years;
• For a selling price exceeding HUF 250,000, three (3) years.

Failure to meet these deadlines results in forfeiture of rights.

The statutory warranty is borne by the seller (distributor) who sold the product directly to you. Pursuant to Section 4 (2) of Government Decree 151/2003. (IX. 22.), the invalid issuance of the warranty card or the failure to provide the warranty card to the consumer does not affect the validity of the warranty. The seller (distributor) is obliged to fulfill claims made based on an invalidly issued warranty card. The exercise of rights arising from the statutory warranty does not require the return of the opened packaging of the product by the consumer. The provisions of this Warranty Card do not affect the consumer's rights arising from the law.

RIGHTS ENFORCEABLE UNDER STATUTORY WARRANTY

In case of malfunction within the warranty period, the consumer may, at their choice:

• a) Demand repair or replacement, unless the chosen warranty claim is impossible to fulfill, or if it would result in disproportionate additional costs for the distributor compared to fulfilling the other warranty claim, taking into account the value of the product in perfect condition, the severity of the breach of contract, and the prejudice caused to the entitled party by the fulfillment of the warranty claim;
• b) Demand a proportional price reduction, or – if the distributor has not undertaken repair or replacement, cannot fulfill this obligation within the appropriate period, or if the entitled party's interest in repair or replacement has ceased – may withdraw from the contract. Withdrawal is not applicable for insignificant defects.

The distributor must replace the product within eight (8) days, unless the consumer specifies otherwise:

• a) if it is determined during the first repair of the product within the statutory warranty period that the product cannot be repaired; or
• b) if the product malfunctions again after being repaired three (3) times; or
• c) if the product has not been repaired by the thirtieth (30th) day from the date the repair request was communicated to the seller, counting from the expiration of the thirty-day period.

If replacement of the product is not possible as described above, the seller (distributor) must refund the purchase price indicated on the proof of payment presented by the consumer within eight (8) days.

Repair or replacement must be carried out within a reasonable period, taking into account the characteristics of the product and its intended use, and in a manner that respects the consumer's interests. The warranty provider should strive to complete the repair or replacement within a maximum of 15 days. The consumer must report their warranty claim directly to the seller (distributor) immediately after discovering the malfunction. If the consumer asserts a replacement claim within three working days from the date of purchase (commissioning) due to product malfunction, the seller (distributor) cannot invoke disproportionate additional costs and must replace the consumer product, provided that the malfunction prevents its intended use.

Only the designated service center can perform warranty repair work within the warranty period, based on a valid Warranty Card. For all warranty repairs, check that the repair slips are filled out correctly. Only new parts can be installed in the product during repair. If the designated workshop does not perform the repair or does not undertake it, the consumer may have the product repaired elsewhere at the expense of the warranty provider. Proof of payment with a valid invoice is required to reimburse the repair costs. The warranty claim for the part of the item affected by replacement or repair restarts.

GENERAL RULES FOR WARRANTY

If the product (from the date of its first purchase as new) malfunctions within the warranty period due to manufacturing defects or the use of improper materials during manufacturing, the official appliance service of the importer within the Warranty Territory will repair it free of charge, or replace the product or its defective part, provided that the conditions and limitations stated in this Warranty Card apply to the defective part. Ownership of all replaced products or parts transfers to the entity performing the replacement.

The warranty is valid only within the warranty period, upon presentation of the defective product and the original document proving the purchase (warranty card, or in its absence, an invoice or receipt) containing the date of purchase, model type, and the name of the selling distributor, which is readable and intact. Otherwise, the importer's official appliance service may refuse free warranty service.

The warranty does not apply to products where the type or serial number has been altered, deleted, removed, or made illegible. Please carefully check the correct completion of the warranty card at the time of purchase and keep the warranty card carefully. Lost warranty cards can only be replaced upon credible proof of the date of sale (e.g., an invoice with date and stamp, presentation of a sales list). Any repair, deletion, alteration, or entry of false data on the warranty card renders the warranty card invalid.

To avoid loss or damage to removable data storage devices from the product, please remove them before submitting the product for repair. The warranty does not cover shipping costs and risks related to the transport of defective products to the importer or the importer's official appliance service by a carrier not designated by the importer. The manufacturer may provide additional supplementary warranty for the product specified in this warranty card, the terms of which – depending on the product – are included in the User Manual attached to the purchased product and/or on the manufacturer's official website. The consumer can report warranty claims related to the product at the representative points designated by the manufacturer, in addition to the legally mandatory warranty period. In case of disputes, the consumer may also initiate proceedings before the conciliation body operating alongside the county (capital city) chambers of commerce and industry.

REPAIRS/REPLACEMENTS PERFORMED UNDER WARRANTY:

Seller's (liable for statutory warranty) stamp and signature of the person who issued the Warranty Card

Buyer's Signature