oneisall BM3 Dog Grooming Vacuum

Introduction

This document provides instructions for the oneisall BM3 Dog Grooming Vacuum, a device designed for efficient pet grooming and home cleaning. It is specifically engineered to manage pet hair, particularly long and thick coats, while minimizing noise disruption.

Key Features

• Powerful Suction

  Equipped with 13Kpa suction power to effectively collect pet hair and dander during grooming and cleaning tasks.

• Low Noise Operation

  Designed with low noise technology to provide a more comfortable grooming experience for pets and owners.

• Large Dust Bin Capacity

  Features a 3-liter dust bin, allowing for extended use without frequent emptying, ideal for homes with multiple pets or significant shedding.

• Comprehensive Grooming Kit

  Includes a set of 6 essential grooming tools tailored for various needs, such as deshedding thick coats, brushing, and cleaning. These tools are designed to attach directly to the vacuum system, capturing loose hair at the source.

• Home Use Focus

  This product is intended for indoor, home use only. It is optimized for removing long, thick hair and is not recommended for outdoor or humid environments.

Operating Instructions

Follow these steps for optimal use of your oneisall BM3 Dog Grooming Vacuum:

1. Setup

   Ensure the vacuum unit is placed on a stable surface. Connect the grooming hose securely to the vacuum unit's intake port. Attach the desired grooming tool to the end of the hose.

2. Powering On

   Plug the vacuum into a suitable power outlet. Press the power button [Power Symbol] to turn the unit on.

3. Grooming Process

   Gently introduce the selected grooming tool to your pet. Move the tool through your pet's coat in the direction of hair growth. The vacuum will simultaneously collect loose hair and dander.

   Tip: Start with a lower suction setting if your pet is sensitive, and gradually increase if needed. Allow your pet to acclimate to the sound and sensation.

4. Tool Selection

   Use the deshedding brush for removing undercoat and loose hair from thick coats. Other tools may be suitable for general brushing or cleaning surfaces.

Maintenance and Cleaning

Regular maintenance ensures the longevity and performance of your grooming vacuum.

1. Emptying the Dust Bin

   After each use, or when the dust bin is full, press the release button [Release Button Symbol] to detach the bin. Open the lid and dispose of the collected hair and debris into a trash receptacle. Close the bin securely before reattaching it to the vacuum unit.

2. Cleaning Filters

   Locate the filter compartment [Filter Compartment Symbol]. Remove the filter(s) and clean them according to specific instructions (e.g., tapping out dust, washing with water if washable). Ensure filters are completely dry before reinserting them.

3. Cleaning Grooming Tools

   Detach grooming tools from the hose. Remove any accumulated hair or debris. If necessary, wash the tools with mild soap and water, and allow them to air dry completely.

Safety Precautions

Please adhere to the following safety guidelines:

• This appliance is designed for domestic use only.
• Do not operate the vacuum in wet or humid conditions.
• Keep the electrical cord and unit away from water and other liquids.
• Always supervise pets when the grooming vacuum is in use.
• Ensure grooming tools are appropriate for your pet's coat type and skin sensitivity.
• Do not use the vacuum for any purpose other than pet grooming and home cleaning as intended.
• Disconnect the power supply [Power Plug Symbol] before performing any maintenance or cleaning.