Oneisall LM2 Pet Grooming Vacuum Cleaner

Safety Warnings and Precautions

• This product is intended for domestic use only, not for commercial or industrial use, nor outdoors or in damp locations.
• Children and persons with reduced physical or mental capabilities should use the device under supervision.
• The device should be used in a safe environment and under the supervision of a person who understands the safe usage principles and product hazards. In the absence of such a person, children should never be allowed to use the device.
• Exercise caution when using the device near children and pets. Do not allow children and pets to play with this product.
• Do not touch the power plug and the product with wet hands.
• Do not use this product if the power cord or plug is damaged.
• Do not use this product if the power cord is damaged or if the product is not functioning correctly or is damaged; contact the company.
• Do not disassemble the product; improper assembly may cause electric shock or fire; contact the company for maintenance.
• Do not inhale flammable or combustible liquids such as gasoline; do not use the device in or near environments with flammable or combustible gases.
• Do not pull the power cord, place heavy objects on the device, or pinch the cord.
• Do not use the device while smoking or working with other high-temperature items (matches, hot ash, etc.).
• Do not insert objects into the opening or block the opening.
• Disconnect the power cord when replacing parts or performing maintenance.
• Do not use or store the device outdoors or in other damp locations.
• Do not use scented products as they may contain flammable chemicals.
• To avoid malfunctions and electric shock, do not operate the device with wet hands or unplug the power cord.
• Do not smoke or use other flammable materials.
• Do not use the device in or near environments with flammable or combustible gases.
• A strange odor may appear during the first use, but it will not have a negative impact on the body.
• The initial use may produce a smell that will disappear over time. However, if a burning smell persists, stop using the device immediately!
• Keep the dustbin and filter clean; using them when dirty can cause malfunctions and accidents.
• Before maintenance, turn off the power and unplug the power cord.
• Turning on the power during maintenance can cause electric shock, accidents, or injuries.
• The product will stop working if it overheats; if the motor overheats, stop using it immediately. If the suction opening is blocked, stop using the device immediately. Empty the dustbin, clean the inlet and filter, and then restart after 60 minutes.
• Ensure the filter is installed and used; removing the filter will cause a malfunction.

Package Contents

• Main Unit x 1: The central vacuum and motor component.
• Storage Tray x 1: A tray designed for organizing accessories.
• Guide Combs x 6: Attachments of varying lengths for the hair clipper.
• Hose x 1: A flexible tube connecting the main unit to various accessories.
• Crevice Nozzle x 1: A narrow attachment for cleaning tight spaces.
• Cleaning Brush x 1: A brush for cleaning the device or surfaces.
• Paw Trimmer x 1: A small attachment for grooming pet paws, eyes, ears, face, and hindquarters.
• Undercoat Brush x 1: A brush designed to remove loose undercoat from pets.
• Grooming Brush x 1: A brush for general pet grooming, promoting healthier, shinier, and softer fur.
• Clipping Machine x 1: The primary attachment for trimming pet fur.
• Nail Grinder x 1: A tool for grooming pet nails.

Product Overview

The Oneisall LM2 features a main unit, a handle, and various accessories for pet grooming.

Main Unit and Controls

The main unit houses the motor and dustbin. The handle provides a grip and houses the dustbin release mechanism. The control panel on the unit includes:

• Speed control button: Used to adjust the suction/operation speed.
• Speed indicator: Lights showing the selected speed level.
• Switch: The main power button to turn the device on/off.
• Dustbin release button: A button to detach the dustbin for emptying.

Specifications

Instructions for Use

1. Dustbin Installation

1. Align the latches on the dustbin with the corresponding slots on the main unit.
2. Press the dustbin firmly into place until it clicks securely.

! WARNING If the device is not suctioning or is making unusual noise, re-install the dustbin.

2. Ready to Use

1. Connect the desired accessory to the vacuum hose.
2. Plug the power cord into a wall socket.
3. Turn on the switch to begin vacuuming.

3. Selecting Speed

Press the speed control button to cycle through the available speeds. It is recommended to start with the quiet mode for the first use.

4. Pet Grooming

Use the appropriate grooming attachment for your pet. The illustration shows the grooming brush being used on a dog's back, with hair being sucked into the vacuum.

5. Emptying the Dustbin

The collected hair can be directly emptied into a trash bin. The illustration shows the dustbin being detached and its contents being emptied.

! WARNING There are 3 cleaning modes: Quiet, Standard, and Maximum. It is recommended to start with the quiet mode for the first use, allowing the pet to gradually get used to the noise.

Using Different Accessories

1. Daily Grooming Brush

Used for grooming fur, promoting healthier, shinier, and softer coat. The process involves brushing the pet while the vacuum sucks away loose hair.

2. Clipping Machine

1. Used for trimming pet fur without creating a mess, as hair is directly suctioned.
2. During clipping, it sucks up cut hair.

The clipper can be used with the vacuum cleaner or independently.

3. Dual Functionality

The clipper can be used standalone or attached to the vacuum unit. Slide the switch upwards to turn it on and downwards to turn it off. ! WARNING Pay attention to the cutting edge and position, and do not use excessive force to avoid skin irritation.

Guide Comb Attachment

Select a guide comb based on the desired fur length. The guide combs (3mm/6mm/9mm/12mm/18mm/23mm) are suitable for grooming hair of various lengths. The set of guide combs is small; store them properly when not in use.

3. Undercoat Brush

Used for removing loose undercoat from pets. The illustration shows the brush being used on a pet, with hair being sucked in. ! WARNING Pay attention to the cutting edge and position, and do not use excessive force to avoid skin irritation.

4. Cleaning Brush

Used for cleaning pet paws or removing pet hair from clothes and furniture.

5. Crevice Nozzle

Used to clean hair on furniture and in hard-to-reach areas.

6. Paw Trimmer

Used for grooming pet paws, eyes, ears, face, and hindquarters. ! WARNING Pay attention to the cutting edge and position, and do not use excessive force to avoid skin irritation.

7. Nail Grinder

Used for grooming pet nails. ! WARNING Exercise caution on soft skin areas and do not use excessive force, as it may cause skin irritation.

Accessories and Working Modes

The following table is a guide; choose accessories and modes according to your needs.

Maintenance and Care

Cleaning the Dustbin

1. Press the release button and detach the dustbin.
2. Press the release button again and empty the hair.
3. Reattach the dustbin following the direction of the arrow.

If the dustbin is cleaned with water or a damp cloth, ensure it is completely dry before reinstallation to prevent motor damage. For any issues with the dustbin, contact support@oneisall.com or visit Amazon.

Cleaning the Clipping Machine

1. Remove the blade by rotating it counter-clockwise.
2. Vacuum and remove debris from the blade and clipper.
3. Apply oil to the blade. (Note: Oil is not included and must be purchased separately.)

Cleaning HEPA and Sponge Filters

1. Detach the dustbin and remove the HEPA and sponge filters.
2. Tap or brush the filters clean. Do not wash them with water.
3. Reinsert the HEPA and sponge filters back into the device.

Frequently Asked Questions (FAQ) and Troubleshooting

! WARNING The product has voltage protection. If you hear a beep and the gear indicator lights flash after pressing the switch, the voltage is unstable. Check the voltage. For any problems, contact support@oneisall.com.

Troubleshooting Guide

If the above solutions do not resolve the problem, stop using the product and contact customer support at support@oneisall.com.

Contact Information

We are ready to help

Oneisall offers a standard 2-year warranty. If you have any problems with your Oneisall product, please contact us. Remember to include proof of purchase, model number, and any relevant photos or videos to expedite the process. Our support team is available 7 days a week and will respond to your inquiry within 24 hours. Thank you for choosing Oneisall.

Please note that the Oneisall warranty does not apply to used products or purchases made from unauthorized resellers. It also does not cover consumables such as blades, guards, filters, brushes, and similar elements, which may require regular replacement or maintenance.

• Email: support@oneisall.com
• Website: www.oneisall.com

Follow us on social media: [Facebook icon] [TikTok icon] [Instagram icon] [YouTube icon]. Watch the guide video: [Guide video link].

For any issues, please contact: support@oneisall.com. Scan QR codes to get the installation video and join us for more rewards.

Environmental Protection and Warranty

This document is a translation of the original user manual created by the manufacturer.

The product should be regularly maintained (cleaned) by the user or by specialized service points at the user's expense. If the user manual lacks information on necessary periodic or service maintenance actions, the physical condition of the product should be assessed at least once a week against its new state. If any deviation is detected, immediate maintenance (cleaning) or service steps should be taken. Failure to properly maintain (clean) and react promptly to deviations may lead to permanent product damage. The warranty does not cover damage resulting from neglect.

Detailed information on distributor/manufacturer warranty conditions is available on the website: https://serwis.innpro.pl/gwarancja

Battery Information

LI-ION Battery

The device is equipped with a LI-ION (lithium-ion) battery, which ages over time due to its physical and chemical properties. The manufacturer specifies the maximum operating time under laboratory conditions. Actual usage time may vary and is not considered a defect. To maintain battery life, avoid discharging below 3.18V or 15% capacity. Discharging below 2.5V can permanently damage the cell and is not covered by warranty. If the battery or device is not used for over a month, charge it to 50% and check the charge level every two months. Store the battery and device in a dry place, away from sunlight and extreme temperatures.

LIPO Battery

The device is equipped with a LI-PO (lithium-polymer) battery, which ages over time due to its physical and chemical properties. The manufacturer specifies the maximum operating time under laboratory conditions. Actual usage time may vary and is not considered a defect. To maintain battery life, avoid discharging below 3.5V or 5% capacity. Discharging below 3.2V can permanently damage the cell and is not covered by warranty. If the battery or device is not used for over a month, charge it to 50% and check the charge level every two months. Store the battery and device in a dry place, away from sunlight and extreme temperatures.