R50C PoE Splitter Product Manual

Features

• The R50C-POE-24Q is a compact Power over Ethernet (PoE) splitter device that inputs a PoE signal and outputs power (24 V DC) and data (Ethernet) into two separate ports to connect any Ethernet-based device to a PoE switch.
• Steps down power from 45 V DC-54 V DC, to 24 V DC to power any standard DC voltage device in areas where only PoE is available.
• Connect Ethernet-based Banner products, such as Ethernet radios, the DXM line, and SNAP SIGNAL® products, to PoE.

Models

Wiring

Input

Integral 4-pin D-Code M12 female quick-disconnect connector

Outputs

Integral 4-pin D-Code M12 female quick-disconnect connector

Integral 4-pin M12 female quick-disconnect connector

Status Indicators

Power LED Indicator (Green)

• Solid Green: Power On
• Off: Power Off

Specifications

Input Characteristics

• Voltage: 42.5 V DC to 57 V DC
• Current: 30 mA independent of powered device
• PoE (Class 0 - 802.3af, 802.3at Type 1)

Output Characteristics

• Voltage: 24 V DC ±10%
• Current: 450 mA average
• Power: 12.95 W
• Limited energy power supply evaluated to IEC, UL, and CSA 61010-2-201 that can be used to power devices that require a Class 2 or SELV power supply.

Dimensions

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change.

Accessories

Cordsets

Input

Output

Product Support and Maintenance

Clean with Mild Detergent and Warm Water

Wipe down the device with a soft cloth dampened with a mild detergent and warm water solution. Do not use any other chemicals for cleaning.

Repairs

Contact Banner Engineering for troubleshooting of this device. Do not attempt any repairs to this Banner device; it contains no field-replaceable parts or components. If the device, device part, or device component is determined to be defective by a Banner Applications Engineer, they will advise you of Banner's RMA (Return Merchandise Authorization) procedure.

Contact Us

Banner Engineering Corp. headquarters is located at: 9714 Tenth Avenue North | Plymouth, MN 55441, USA | Phone: +1 888 373 6767

For worldwide locations and local representatives, visit www.bannerengineering.com.

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time.

Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.