IKEA MATCHSPEL Gaming Chair Assembly Instructions

Parts List

• 1x Allen key (124345)
• 9x Screw (122134)
• 6x Screw (128633)
• 2x Screw (10068253)
• 1x Plastic bracket
• 5x Casters (10074975, 10074949, 10108989, 10109010)

Assembly Steps

Step 1: Attach Casters

Insert the 5 casters into the base of the chair. Ensure they click into place.

Visual Description: The base of the chair is shown with five points where casters can be inserted. A caster is shown being pushed into one of these points, with a 'click!' indication.

Step 2: Insert Gas Lift

Insert the gas lift into the center of the chair base.

Visual Description: The gas lift cylinder is shown with an arrow indicating it should be inserted into the central opening of the chair base.

Step 3: Attach Seat Mechanism

Place the seat mechanism onto the gas lift and press down to secure.

Visual Description: The seat mechanism is shown being lowered onto the top of the gas lift cylinder, which is already inserted into the chair base with casters.

Step 4: Attach Armrests to Seat

Attach the armrests to the underside of the seat using the provided screws.

Visual Description: The underside of the seat is shown. An armrest is aligned with mounting points, and screws are shown being inserted through the armrest into the seat.

Step 5: Attach Seat to Armrest Assembly

Place the seat cushion onto the armrest assembly and secure it.

Visual Description: The seat cushion is shown being placed onto the frame that includes the armrests. An arrow indicates downward pressure.

Step 6: Attach Backrest Support

Attach the backrest support to the seat assembly using screws.

Visual Description: The backrest support is shown being attached to the rear of the seat assembly. Screws and the Allen key are depicted for this step.

Step 7: Attach Backrest to Support

Attach the backrest to the backrest support using screws.

Visual Description: The backrest is shown being attached to the backrest support. Screws and the Allen key are depicted for this step.

Step 8: Secure Backrest

Secure the backrest to the main seat structure.

Visual Description: The backrest is shown being attached to the seat. Screws are used for this connection.

Step 9: Final Backrest Attachment

Complete the attachment of the backrest.

Visual Description: The backrest is shown fully attached to the seat assembly.

Step 10: Attach Seat Plate

Attach the seat plate to the underside of the seat cushion.

Visual Description: The seat plate is shown being attached to the underside of the seat cushion with screws.

Step 11: Connect Seat Plate to Backrest Mechanism

Connect the seat plate to the backrest mechanism.

Visual Description: The seat plate is shown being connected to the backrest mechanism, with screws being used for attachment.

Step 12: Connect Seat Plate to Backrest Mechanism (Continued)

Continue connecting the seat plate to the backrest mechanism.

Visual Description: Further connection of the seat plate to the backrest mechanism is shown, using screws.

Step 13: Connect Seat Plate to Backrest Mechanism (Final)

Finalize the connection of the seat plate to the backrest mechanism.

Visual Description: The final connection of the seat plate to the backrest mechanism is depicted, using screws.

Step 14: Attach Headrest

Attach the headrest to the top of the backrest.

Visual Description: The headrest is shown being attached to the top of the backrest.

Adjustments and Safety Information

Seat Height Adjustment

To adjust the seat height, use the lever under the seat. Pull the lever up to raise the seat, and press down on the seat while pulling the lever to lower it.

Visual Description: A diagram shows a hand operating a lever under the seat, with arrows indicating upward and downward movement of the seat.

Locking Mechanism

The chair features a locking mechanism for the tilt function. Engage the lock by pushing the lever in one direction, and disengage it by pushing in the opposite direction.

Visual Description: Diagrams show a lever being pushed in two different directions, with symbols indicating a locked (padlock) and unlocked (open padlock) state.

Backrest and Armrest Adjustments

The backrest and armrests can be adjusted for comfort.

Visual Description: Diagrams show the backrest and armrests being adjusted in various directions (up/down, forward/backward).

Safety Warning: Energy Accumulators

Warning! Only trained personnel may replace or repair seat height adjustment components with energy accumulators.

This warning is provided in multiple languages: Deutsch, Français, Nederlands, Dansk, Íslenska, Norsk, Suomi, Svenska, Česky, Español, Italiano, Magyar, Polski, Eesti, Latviešu, Lietuvių, Portugues, Româna, Slovensky, Български, Hrvatski, Ελληνικά, Українська, Srpski, Slovenščina, Türkçe, Bahasa Indonesia, Bahasa Malaysia, العربية, ไทย, 简体中文, 한국어, 日本語.

Safety Warning: Casters

For safety reasons, the casters lock automatically when the chair is not in use.

This is to prevent the chair from rolling away unexpectedly. The casters will unlock when weight is applied to the seat.

This warning is provided in multiple languages: Deutsch, Français, Nederlands, Dansk, Íslenska, Norsk, Suomi, Svenska, Česky, Español, Italiano, Magyar, Polski, Eesti, Latviešu, Lietuvių, Portugues, Româna, Slovensky, Български, Hrvatski, Ελληνικά, Українська, Srpski, Slovenščina, Türkçe, Bahasa Indonesia, Bahasa Malaysia, العربية, ไทย, 简体中文, 한국어, 日本語.