MEE audio C20PTZ Professional USB Camera User Manual

Installing Batteries

Install 2x AAA batteries in the battery compartment located on the back of the remote control. Note: Batteries not included.

Diagram description: Illustration shows two AAA batteries with positive (+) and negative (-) terminals, and a remote control battery compartment.

Placement Option 1: Table or Tripod

Place the camera on a flat, stable surface or attach it to a compatible tripod.

Diagram description: Illustrations show the camera placed on a flat surface and another mounted on a tripod.

Placement Option 2: Ceiling Mount

The camera can also be mounted on a ceiling using the included mounting kit.

Mounting Kit Contents

Use the included hardware to attach the mounting plate to the ceiling as shown. Point the arrow on the mounting plate in the direction you want the camera to face.

Caution:

Push the camera against the mounting plate and rotate it clockwise.

Caution:

Video Setup

This camera is a plug-and-play device and does not require additional software, but you may have to select it as the default video device in your video recording or teleconferencing app.

Diagram description: Simulation of a computer's settings menu, showing 'VIDEO' and 'CAMERA' options, with 'MEE C20PTZ CAMERA INTEGRATED WEBCAM' selected. A small illustration of the camera is also shown.

For more information about using your camera with different applications, scan the QR code or enter the URL below into your web browser: MEEaudio.com/CameraHelp

Microphone Setup

To use the integrated microphone, you may also need to select it from your video recording or teleconferencing app.

Diagram description: Simulation of a computer's settings menu, showing 'AUDIO' and 'MICROPHONE' options, with 'MEE C20PTZ CAMERA AUDIO MICROPHONE ARRAY DEFAULT COMMUNICATIONS DEVICE' selected. A small illustration of the camera is also shown.

This camera also supports up to two external 3.5mm microphones. To use external microphones, simply plug them into the 3.5mm inputs on the back of the camera.

Diagram description: Illustration of the rear of the camera showing two 3.5mm microphone input ports labeled MIC 1 and MIC 2.

Camera Overview

Diagram description: Illustration of the front/top of the MEE audio C20PTZ camera, indicating the 4K UHD Lens, ANC Mics (x2), Power Indicator, and Power button.

Diagram description: Illustration of the rear of the camera, indicating MIC 1 and MIC 2 (3.5 mm microphone inputs), the Base with a 1/4 inch tripod thread, Privacy indicator, Mute indicator, and IR remote sensor.

Using the Remote Control

Note: Aim the remote at the IR sensor on the base of the camera.

Diagram description: Illustration of the remote control with buttons labeled A through L, corresponding to functions:

• A: Power on/off *
• B: Audio mute **
• C: Pan up
• D: Pan left
• E: Pan right
• F: Pan down
• G: Reset camera position and zoom
• H: Zoom in
• I: Zoom out
• J: Vertical flip ***
• K: Increase volume **
• L: Decrease volume **

* The Power on/off button on the remote and on the camera body work independently. If the camera is powered off via the Power button on the camera body, the red Power indicator light will light up to indicate that the master power switch has been used and the remote is disabled.

** Affects both the built-in microphones and any external microphones connected to the 3.5 mm microphone input(s). The Mute indicator light on the base of the camera will be red while the microphones are muted.

*** For placement on ceilings.

Diagram description: Illustration of the camera demonstrating its pan (340°) and tilt (50°) movement capabilities.

Safety and Care

• Avoid touching the camera lens with your fingers, sharp objects, and coarse materials.
• Use a clean, soft cloth to clean the camera if needed. Do not use chemical cleaners.
• Avoid dropping the camera as impact may damage its internal components or scratch its lens.
• There are no user replaceable/reparable parts in this device. Disassembling it will void your warranty.

Disposal and Recycling

Dispose of this product in accordance with all local laws and regulations. Because this product contains electronic components, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options.

Warranty

MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/support.

Warnings

This device is designed and manufactured to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully.

• To prevent fire or shock hazards, do not expose this unit to rain or moisture. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
• Only use attachments/accessories specified by the manufacturer.

Changes or modifications to this unit not expressly approved by MEE audio could void the user's authority to operate the equipment. Keep the device and packaging out of reach of children.

Cancer and Reproductive Harm Warning

Diagram description: A warning symbol indicating potential health hazards.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. For more information about this warning visit MEEaudio.com/prop65.

For Additional Support

View MEEaudio.com/CameraHelp for easy-to-follow setup videos and the latest troubleshooting information.

Still Have Questions?

Email Support: support@meeaudio.com