Infinix NOTE 50 Pro User Manual (X6855)
Exploded Diagram Specification
| Part Number | Description | Part Number | Description |
|---|---|---|---|
| 1 | TP+LCM | 2 | TP HEAT FILM |
| 3 | VAPOR CHAMBER | 4 | MIDFRAME |
| 5 | MAINBOARD | 6 | FRONT CAMERA |
| 7 | REAR 50M CAMERA | 8 | REAR 8M CAMERA |
| 9 | 50M GROUNDING AD | 10 | PROACTIVE BRACKET MYLAR |
| 11 | FRONT CAMERA MOUNT | 12 | 50M GROUNDED COPPER FOIL |
| 13 | 8M GROUNDED COPPER FOIL | 14 | 8M GROUNDING AD |
| 15 | FLASH FPC | 16 | SQUARE RECEIVER |
| 17 | BLACK L2.5 SCREW | 18 | ANTI-CHANNELING SILICONE SHEET |
| 19 | FRONT CAMERA COPPER FOIL | 20 | RGB LIGHTING EFFECT FPC |
| 21 | MAIN PCB HEAT FILM | 22 | UP FRAME |
| 23 | FLASH BTB PRESS STEEL | 24 | BLACK L1.3 SCREW |
| 25 | REAR CAMERA FRAME | 26 | BATTERY COVER |
| 27 | LENS PROTECT AGAINST DUST MYLAR | 28 | ALLOY DECO |
| 29 | COMPOSITE PANEL TRIMS | 30 | 50M LENS |
| 31 | RGB LENS | 32 | FLICKER LENS |
| 33 | SUB BOARD | 34 | LCM FPC RUBBER |
| 35 | USB RUBBER | 36 | HORN BRACKET |
| 37 | MAIN FPC BTB FOAM | 38 | COAXIAL CABLE |
| 39 | MAIN FPC | 40 | BATTERY |
| 41 | FINGERPRINT PRESSED FOAM | 42 | MAIN FPC BTB SILICONE SHEETS |
| 43 | SILVER L3.5 SCREW | 44 | FPC BTB SILICONE SHEETS |
| 45 | LCM FPC BTB SILICONE SHEETS | 46 | FINGERPRINT BTB SILICONE SHEETS |
| 47 | MOTOR PRESSES THE FOAM | 48 | FPC BTB PRESSED FOAM |
| 49 | LCM BTB CONDUCTIVE SPONGE | 50 | SIMCARD HOLDER |
| 51 | SQUARE MOTOR | 52 | FINGERPRINT MODULE |
| 53 | FLICKER RUBBER | 54 | MFPC PROTECT FOAM |
Know Your Phone
This section provides a visual guide to the key components of the Infinix NOTE 50 Pro.
- 1. Front camera
- 2. Volume + button
- 3. Volume - button
- 4. Power button
- 5. NFC (Near Field Communication)
- 6. Wireless charging indicator
The phone features a front camera, volume controls, a power button, NFC capability, and supports wireless charging.
SIM Card Installation
To install a SIM card:
- Power off your phone.
- Refer to the provided illustration for SIM card installation. The phone supports dual SIM cards (SIM 1 and SIM 2).
Ensure the SIM cards are correctly inserted into their respective trays.
Charging the Phone
You can charge your Infinix NOTE 50 Pro using either an Infinix-approved charger or by connecting it to a computer via a USB cable.
Important: Use only Infinix chargers and cables. Using unauthorized chargers or cables may damage the phone and void its warranty.
The phone can be charged via its USB port. An illustration shows the USB port and the connection of a charging cable.
FCC Caution
Labelling Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference.
- (2) This device must accept any interference received, including interference that may cause undesired operation.
Information to User
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device.
Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception (which can be determined by turning the device off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) Information
This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: X6855 (FCC ID: 2AIZN-YYS-X6855) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.87 W/kg and when properly worn on the body is 0.78 W/kg.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
Additional Information
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
Operating System: Android™
Android is a trademark of Google LLC.
